1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your Brondell T44-RW Swash Thinline Electric Bidet Toilet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Figure 1: Brondell T44-RW Swash Thinline Electric Bidet Toilet Seat.
2. Sikkerhedsoplysninger
Observe all safety precautions to prevent injury or damage. This appliance is for household use only. Do not immerse the unit in water. Ensure the electrical outlet is a Ground Fault Circuit Interrupter (GFCI) type and is properly grounded. Disconnect power before cleaning or servicing.
Elektrisk sikkerhed
- Use only with a 120V AC, 60Hz, 15A grounded outlet.
- Anvend ikke, hvis netledningen eller stikket er beskadiget.
- Hold netledningen væk fra opvarmede overflader.
Vandforsyningssikkerhed
- Connect to a cold water supply only.
- Sørg for, at alle forbindelser er tætte for at forhindre lækager.
- Do not use excessive force when tightening connections.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Brondell T44-RW Bidet Toilet Seat
- Wireless Remote Control with Wall Mount
- Mounting Plate and Bolts
- T-ventil stik
- Bidetslange
- Installation Parts (washers, nuts, etc.)
- Brugermanual
4. Installation
Follow these steps for proper installation. No specialized tools are required, and a plumber is generally not needed.
4.1 Determine Toilet Fit
Before installation, ensure your toilet is compatible with the round T44-RW model. Measure your toilet bowl as shown in Figure 2.
Figure 2: Toilet Measurement Guide.
- Measure A (Bolt holes to front of bowl): For a round bidet seat, this distance should be 16"-17.75".
- Measure B (Bolt holes to toilet tank): This distance must be at least 1.5".
- Measure C (Distance between bolt holes): This distance should be 5.25"-7.45".
The T44-RW is designed for round toilets. For elongated toilets, a different model (T44-EW) is required.
Figure 3: Round vs. Elongated Toilet Bowl Comparison.
4.2 Forberedelse
- Sluk for vandtilførselsventilen til dit toilet.
- Skyl toilettet for at tømme tanken.
- Frakobl den eksisterende vandforsyningsslange fra toilettanken.
- Fjern dit eksisterende toiletsæde og låg.
4.3 Installing the T-Valve
- Install the T-valve onto the fill valve under your toilet tank. Ensure the rubber washer is correctly seated.
- Tilslut toilettets originale vandforsyningsslange til bunden af T-ventilen.
- Connect the bidet hose (included) from the T-valve to the water inlet on the side of the bidet seat. Hand-tighten all connections, then use a wrench for a final quarter-turn to ensure no leaks. Do not overtighten.
4.4 Mounting the Bidet Seat
- Place the mounting plate over the toilet bolt holes.
- Insert the mounting bolts through the plate and toilet holes. Secure with conical washers and nuts from underneath the toilet.
- Slide the bidet seat onto the mounting plate until it clicks into place. Adjust the seat position as needed for a secure and comfortable fit.
Figure 4: Installed Brondell T44-RW Bidet Seat.
4.5 Elektrisk tilslutning
- Plug the bidet seat's power cord into a grounded GFCI electrical outlet. The power cord is 47.2 inches long.
4.6 sidste trin
- Åbn langsomt vandtilførselsventilen til toilettet. Kontroller for eventuelle lækager.
- Allow the bidet's water tank to fill (this may take a few minutes).
- Perform a test wash cycle to ensure proper function.
5. Betjeningsvejledning
The Brondell T44-RW is operated using the included wireless remote control. The remote features user-favorite presets and an ergonomic design.
Figur 5: Trådløs fjernbetjening.
5.1 Basic Wash Functions
- Bagvask: Tryk på knappen "Bagside" for en standard bageste vask.
- Forvask: Tryk på "Front"-knappen for en feminin vask.
- Stærk vask: Press the "Strong" button for a more powerful wash.
- oscillation: During a wash cycle, press the oscillation button to move the nozzle back and forth for a wider cleaning area.
5.2 Justering af indstillinger
- Vandtemperatur: Use the "Water Temp." button to cycle through available water temperature settings (e.g., Low, Medium, High, Off).
- Vandtryk: Use the "+" and "-" buttons (often near "Water Pressure") to adjust the water spray intensity.
- Dyseposition: Use the "Nozzle Position" arrows to adjust the nozzle's forward or backward position.
- Sædetemperatur: Use the "Seat Temp." button to adjust the heated seat temperature.
- Varmlufttørrer: After a wash, press the "Dry" button to activate the warm air dryer. Use the "+" and "-" buttons to adjust the air temperature or intensity.
5.3 Yderligere funktioner
- Natlys: The 7-color LED night light can be activated or deactivated via the remote. It provides illumination for nighttime use.
- Lugtfjerner: The activated carbon deodorizer automatically engages to neutralize odors.
- Brugerforudindstillinger: The remote allows for programming and saving two individual user settings for personalized comfort. Refer to the remote control section of the full manual for detailed programming instructions.
Figure 6: Bidet Seat Night Light Feature.
6. Vedligeholdelse
Regular cleaning and maintenance ensure optimal performance and hygiene of your bidet seat.
6.1 Rengøring af dysen
The stainless steel nozzle performs an automatic self-cleaning rinse before and after each use. For manual cleaning:
- Press the "Nozzle Cleaning" button on the remote to extend the nozzle.
- Gently clean the nozzle with a soft brush or cloth and mild soap. Do not use harsh chemicals or abrasive cleaners.
- Press "Stop" or wait for the nozzle to retract automatically.
Figure 7: Stainless Steel Nozzle.
6.2 Rengøring af bidetsædet
- Tag netledningen ud af stikkontakten.
- Wipe the exterior surfaces of the bidet seat with a soft, damp klud og et mildt, ikke-slibende rengøringsmiddel.
- Sprøjt ikke vand direkte på enheden.
- Sørg for, at enheden er helt tør, før du sætter den i stikkontakten igen.
6.3 Vinterklargøring (hvis relevant)
If the bidet seat will be exposed to freezing temperatures, it must be drained to prevent damage. Refer to the full product manual for detailed winterization instructions.
7. Fejlfinding
Hvis du støder på problemer, skal du se følgende tabel, før du kontakter kundesupport.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen vandspray | Water supply valve closed; bidet hose kinked; water filter clogged (if installed). | Open water supply valve; straighten hose; check/replace water filter. |
| Ingen strøm | Power cord unplugged; GFCI tripped; power outage. | Ensure plug is secure; reset GFCI; check household power. |
| Water temperature not changing | Temperature setting incorrect; water heater issue. | Adjust water temperature setting on remote; allow time for water to heat. |
| Fjernbetjeningen reagerer ikke | Batteries low or dead; remote out of range; obstruction. | Replace remote batteries; ensure clear line of sight to bidet; move closer. |
| Lækager fra forbindelser | Løse forbindelser; beskadigede skiver. | Spænd forbindelserne (overspænd dem ikke); udskift skiver, hvis de er beskadigede. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Model | T44-RW |
| Type | Elektrisk bidet toiletsæde |
| Form | Rund |
| Dimensioner (L x B x H) | 20.7" L x 15" W x 3.9" H (99mm height) |
| Vægt | 8.7 pund |
| Materiale | Plast |
| Dysemateriale | Rustfrit stål |
| Water Opvarmning | Instant Ceramic Water Heater (Endless Warm Water) |
| Opvarmet sæde | 3-Temperature Settings |
| Varmlufttørrer | 5-Level Settings |
| Lugtfjerner | Aktivt kul |
| Natlys | 7-farvet LED |
| Strømkabellængde | 47.2 tommer |
| Strømforsyning | 120V AC 60Hz |
| UPC | 819911010479 |
9. Garanti og support
Brondell products are designed for quality and durability. For specific warranty details, please refer to the warranty card included with your product or visit the official Brondell website. For technical assistance or customer service, please contact Brondell support directly.
Du kan finde flere oplysninger og supportressourcer på Brondell Store on Amazon.
