PEMP 10.25-tommer Linux-skærm brugermanual til BMW X1 F48 NBT (2016-2017)

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your PEMP 10.25-inch Linux Screen for BMW X1 F48 NBT models produced between 2016 and 2017. This device supports Wireless CarPlay, Android Auto, and calls via the original Bluetooth microphone, enhancing your vehicle's multimedia capabilities.

2. Opsætning og installation

2.1 Pakkens indhold

Bekræft at alle komponenter er til stede i din pakke:

• 10.25-tommer Linux-skærm
• ISO ledningsnet
• USB kabel
• Audio kabel
• Installationsmanual
• Monteringsbeslag

Image: Contents of the PEMP 10.25-inch Linux Screen package, showing the screen, ISO wiring harness, USB cable, audio cable, and installation manual.

2.2 Kompatibilitetskontrol

This unit is compatible with BMW X1 F48 NBT models produced between 2016 and 2017. Ensure your vehicle's original system matches the NBT UI for proper functionality.

Image: A compatibility chart illustrating that the NBT UI is the correct interface for this product. Other interfaces like CIC UI (4PIN) and EVO UI are not compatible.

2.3 Installationstrin

Follow these steps carefully for proper installation. It is recommended to consult a professional if you are unsure about any part of the process.

1. Remove Air Conditioning Vents and Control Panel:

   Carefully pry and remove the air conditioning decorative panel. Disconnect any wiring harnesses attached to the panel. Then, remove the air conditioning control panel and disconnect its wiring harness.

   Video: Installation guide for Autoabc Touchscreen Multimedia Radio for BMW, demonstrating removal of air conditioning vents and control panel.
2. Remove Original Radio and Screen:

   Unscrew the fixing screws securing the original radio unit and carefully pull it out. Disconnect the power cable from the back of the radio. Then, unscrew the fixing screws for the original display screen and disconnect its LVDS cable.

   Video: Installation guide for Autoabc Touchscreen Multimedia Radio for BMW, demonstrating removal of the original radio and screen.

3. Connect New Wiring Harness:

   Connect the new power cable to the original power cable. Route the power cable and USB cable inside the vehicle's structure to ensure a tidy installation. Connect the LVDS adapter module to the new screen.

   Video: Installation guide for Wireless CarPlay for BMW X1 Series, showing wiring connections.

4. Fiber Optic Cable Transfer:

   If your original car has a fiber optic cable, you must transfer it to the power cable of the new product. This is crucial for sound functionality.

   

   Image: Instructions for transferring the 2-pin green optical fiber cable from the original CD unit to the new Linux harness.

   Video: Demonstration of transferring fiber optic cables to resolve no sound issues.

5. DIP-switchindstillinger:

   Set the DIP switches on the Can Bus Decoder according to your screen size. For a 10.25-inch screen, set DIP switch 1 to ON, and the rest to OFF.

   

   Image: DIP switch settings for the Can Bus Decoder, indicating the correct configuration for a 10.25-inch screen.
6. Installer ny skærm:

   Connect the cables to the new screen. Align the clips on the back of the new screen with the mounting bracket and press gently to secure it in place. Reinstall the air conditioning control panel and decorative trim.

   Video: Installation guide for Wireless CarPlay for BMW X1 Series, showing connection of cables and screen installation.

3. Betjeningsvejledning

3.1 Grundlæggende funktioner

• OEM Info Display: Long press the Menu button to switch between the factory OEM interface and the CarPlay/Android Auto interface.
• Kontrollere: Supports the car's original knob control and capacitive touch function for CarPlay/Android Auto. Steering wheel buttons can also be used for calls.
• USB-medie: Supports playing music and video via USB.

Billede: Overview of the PEMP 10.25-inch Linux Screen features, including OEM info switching and various connectivity options.

3.2 Trådløs CarPlay og Android Auto

The unit supports both wireless and wired CarPlay and Android Auto. No additional adapters are needed.

Image: Visual representation of Wireless CarPlay and Android Auto interfaces on the PEMP 10.25-inch Linux Screen.

Video: Instructions on how to connect Apple CarPlay to the system.

Video: Instructions on how to connect Android Auto to the system.

3.3 Bluetooth-opkald

The system supports simultaneous use of OEM Bluetooth for calls, ensuring excellent call sound quality. You can answer CarPlay or Android Auto phone calls using the steering wheel buttons.

Video: Demonstration of how to use the OEM Bluetooth for calls in CarPlay.

3.4 kamerastøtte

Supports the car's original reversing camera and radar information display. Also supports aftermarket 720P AHD/CVBS format cameras. Aftermarket cameras exceeding 720P AHD format are not supported.

Image: Illustration of the system's support for both OEM and aftermarket cameras, including settings for camera type and format.

4. Vedligeholdelse

For at sikre din PEMP Linux-skærms levetid og optimale ydeevne skal du følge disse vedligeholdelsesretningslinjer:

• Rensning: Use a soft, lint-free cloth to clean the screen. Avoid abrasive materials or harsh chemicals that could damage the display.
• Temperatur: Undgå at udsætte enheden for ekstreme temperaturer, både varme og kolde, da dette kan påvirke ydeevne og levetid.
• Væskeeksponering: Prevent any liquids from entering the device. In case of accidental spills, power off the unit immediately and allow it to dry completely before use.

5. Fejlfinding

This section addresses common issues you might encounter with your PEMP Linux Screen.

5.1 No Sound from OEM Car Info or CarPlay/Android Auto

If you experience no sound, follow these steps:

1. Tjek OEM-radiolyd: Press the FM/AM button to confirm if the OEM radio has sound.
   • If the OEM radio has sound, you need to set the resolution. Navigate to: Opsætning > Bilindstillinger > Bilens originale skærmopløsning and select the correct item.
   • If there is no sound from the OEM radio, you will need to reconnect the socket on the back of the OEM radio. Refer to the fiber optic cable transfer instructions in the Setup section.

   Video: Guide on how to fix the no sound issue, including checking OEM radio and fiber optic cable connections.

2. AUX Switching Settings:
   • Automatisk: Gå til Car Settings > Setup and find "Automatically switch to AUX". Choose "Harman Head Unit" or "Alpine Head Unit" according to your car.
   • Manual: Gå til Main menu > Multimedia > External devices. Long press the number key "8" until you hear a tone ringing.
   

   Image: Instructions for configuring automatic and manual AUX switching for audio output.

5.2 OEM-løsningsproblemer

If the OEM display is not showing correctly, you may need to adjust the resolution settings.

1. Adjust Resolution: Naviger til Opsætning > Bilindstillinger > Bilens originale skærmopløsning and select the appropriate resolution for your original display.

   Video: Guide on how to resolve OEM resolution issues by adjusting settings.

6. Specifikationer

7. Garanti og support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official PEMP webwebsted. Vores kundeserviceteam er tilgængeligt for at hjælpe med eventuelle spørgsmål eller problemer, du måtte støde på.