1. Introduktion
Thank you for choosing the Electro-Voice ZLX-12P-G2 Powered Loudspeaker System. This manual provides essential information to help you safely and effectively set up, operate, and maintain your new audio equipment. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre elektrisk stød, personskade eller beskadigelse af udstyret:
- Strømkilde: Tilslut kun højttaleren til en strømforsyning af den type, der er beskrevet i denne manual og markeret på enheden.
- Jording: Sørg for, at netledningen er korrekt jordforbundet for at forhindre elektriske farer.
- Fugtighed: Udsæt ikke enheden for regn eller fugt. Placer ikke genstande fyldt med væsker, såsom vaser, på enheden.
- Ventilation: Sørg for tilstrækkelig ventilation. Bloker ikke ventilationsåbningerne.
- Varme: Placer ikke enheden i nærheden af varmekilder såsom radiatorer, varmeregistre, komfurer eller andre apparater, der producerer varme.
- Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.
- Højttalerstativer: When using speaker stands, ensure they are stable and correctly assembled. Do not exceed the maximum weight capacity of the stands.
3. Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- 2x Electro-Voice ZLX-12P-G2 12-inch Powered Loudspeakers
- 2x Auray SS-47S-PB Steel Speaker Stands
- 1x Carrying Case for Speaker Stands
- 2x XLR Cables
- 2x Power Cords (not explicitly listed in JSON but implied for powered speakers)
- Denne brugervejledning
4. Opsætning
4.1 Højttalerplacering
The ZLX-12P-G2 loudspeakers offer versatile placement options:
- Gulvstående: Place directly on a stable, flat surface.
- Stangmonteret: Use the included Auray SS-47S-PB steel speaker stands. Ensure the pole is securely inserted into the speaker's pole mount and the stand's legs are fully extended for stability.
- Monitor/Kick-Back: The cabinet design allows for use as a floor monitor, angled towards the performer.
4.2 Tilslutningskabler
Refer to the rear panel for all connections:
- Magt: Connect the power cord to the MAINS IN socket and then to a suitable AC power outlet.
- Lydindgang: Use the included XLR cables to connect your audio source (mixer, microphone, instrument) to INPUT 1 or INPUT 2. These inputs accept both XLR and 1/4" TRS/TS connectors. A 3.5mm Aux input is also available for consumer devices.
- Lydudgang: The MIX OUT XLR connector provides a mixed signal of all inputs for connecting to additional loudspeakers or recording devices.
4.3 Indledende tænding
After all connections are made, switch the MAINS IN power switch to the ON position. The LCD display will illuminate, indicating the unit is powered on and ready for operation.
5. Betjeningsvejledning
5.1 DSP Control and LCD Display
The ZLX-12P-G2 features a 1-knob DSP (Digital Signal Processor) control and an LCD display for easy system configuration. Rotate the knob to navigate menus and press to select options. Adjust settings such as EQ, crossover, and application presets (e.g., Music, Live, Speech, Club).
5.2 Input and Output Gain Controls
Independent gain controls for INPUT 1 and INPUT 2 allow you to adjust the volume of each connected source. The MASTER volume control adjusts the overall output level of the loudspeaker.
5.3 Bluetooth-lydafspilning
The ZLX-12P-G2 is Bluetooth-enabled for wireless audio streaming:
- Activate Bluetooth on your smartphone or laptop.
- Select the ZLX-12P-G2 from the list of available devices.
- Once paired, audio from your device will stream wirelessly to the loudspeaker.
5.4 App kontrol
For advanced control and monitoring, download the official Electro-Voice app (available for smartphone and tablet). The app allows remote adjustment of DSP settings, input levels, and system diagnostics.
6. Vedligeholdelse
6.1 Rengøring
Clean the loudspeaker cabinet with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish. Keep the grille free of dust and debris.
6.2 Opbevaring
When not in use, store the loudspeakers in a dry, temperate environment, away from direct sunlight and extreme temperatures. Using protective covers (sold separately) is recommended to prevent dust accumulation and minor damage.
7. Fejlfinding
If you encounter issues with your ZLX-12P-G2 loudspeakers, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lydudgang | No power; input gain too low; master volume too low; incorrect input selection; faulty cable. | Check power connection and switch; increase input gain and master volume; verify input source; test with a different cable. |
| Forvrænget lyd | Input signal too high (clipping); master volume too high; incorrect DSP settings. | Reduce input gain or source volume; lower master volume; reset DSP settings or adjust EQ. |
| Problemer med Bluetooth-forbindelse | Device not in pairing mode; loudspeaker already paired to another device; interference. | Ensure loudspeaker is discoverable; disconnect from other devices; move closer to the loudspeaker; restart both devices. |
| Loudspeaker not powering on | No power from outlet; faulty power cable; internal fault. | Check power outlet with another device; try a different power cable; if problem persists, contact support. |
8. Specifikationer
Key technical specifications for the Electro-Voice ZLX-12P-G2 Powered Loudspeaker:
| Feature | Detalje |
|---|---|
| Modelnummer | ZLX-12P-G2 |
| Højttaler type | 2-vejs drevet højttaler |
| Bashøjttaler diameter | 12 tommer |
| Diskant-diameter | 1.4 tommer |
| Amplivligere magt | 1000W klasse-D |
| Frekvensområde (-10 dB) | 48 Hz til 18 kHz |
| Forbindelse | 2x XLR-1/4" Combo Inputs, 3.5mm Aux Input, XLR Mix Out, Bluetooth |
| DSP kontrol | 1-Knob with LCD Display |
| Materiale (indkapsling) | High-impact polypropylene composite |
| Dimensioner (H x B x D) | Approximately 19"D x 13"W x 12"H (Note: JSON lists D, W, H in a different order) |
| Varens vægt | 40 pund |
| Monteringstype | Floor Standing, Pole-Mounted, Monitor/Kick-Back |
| Trådløs kommunikation | Bluetooth |
| Kontrolmetode | On-board DSP, App |
9. Garanti og support
9.1 Garantioplysninger
The Electro-Voice ZLX-12P-G2 Powered Loudspeaker System is covered by a Begrænset 3-års producentgarantiDenne garanti dækker materiale- og fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.
9.2 Kundesupport
For technical assistance, warranty service, or further inquiries, please contact Electro-Voice customer support through their official website or authorized service centers. Do not attempt to repair the unit yourself, as this may void your warranty.
