Produkt overview
The TESmart HDMI KVM Switch is designed to allow two computers or laptops to share a single set of keyboard, mouse, and monitor. This device is ideal for home and office setups, gaming consoles, and streaming devices, providing efficient multi-device management.
Figure 1: TESmart HDMI KVM Switch and included cables.
Key features include Ultra HD 4K@60Hz resolution support, EDID emulators to prevent display setting changes, seamless zero-latency keyboard and mouse switching, and wide operating system compatibility.
Opsætningsinstruktioner
Follow these steps to set up your TESmart HDMI KVM Switch:
- Tilslut computere: Use the provided KVM cables (HDMI+USB A/B) to connect your two computers to the KVM switch's Input 1 and Input 2 ports. Ensure both the HDMI and USB-B ends of each cable are connected to the respective computer.
- Tilslut skærm: Connect your monitor to the HDMI Output port on the KVM switch using an HDMI cable (not included).
- Tilslut tastatur og mus: Plug your wired or wireless (with 2.4G receiver) keyboard and mouse into the dedicated keyboard and mouse USB ports on the KVM switch. The upgraded pass-through mode ensures wide compatibility. Note: Wireless Bluetooth keyboards and mice are not supported.
- Tilslutning af periferiudstyr (valgfrit): Utilize the additional USB 2.0 port to connect other peripheral devices such as a USB hub, USB drive, printer, or scanner. Note: Hotkey switching is not supported when the keyboard is connected to this USB 2.0 port.
- Tilslut lyd (valgfrit): For stereo audio output, connect headphones or a 3-segment 3.5mm earpiece device to the L/R Out 3.5mm Audio Jack port.
- Tænd: Connect the DC 5V power adapter to the KVM switch and plug it into a power outlet. Turn on the KVM switch using the power switch.
Figure 2: Diagram illustrating the connection of two PCs and one monitor to the KVM switch.
Figur 3: Detaljeret view of the KVM switch's input and output ports.
Video 1: En overview of the TESmart HDMI KVM Switch, including unboxing and basic setup steps.
Betjeningsvejledning
The KVM switch offers multiple convenient methods for switching between connected computers:
- Frontpanelknap: Press the 'Select' button on the front panel of the KVM switch to cycle through the connected computers.
- IR fjernbetjening: Use the included IR remote control to switch directly to a specific input (e.g., press '1' for PC1, '2' for PC2). Note: AAA batteries are required for the remote control and are not included.
- Tastatur genvejstaster: Utilize specific keyboard hotkey combinations for quick switching:
- Press 'Scroll Lock' key twice + 'Page Up' to select the previous input port.
- Press 'Scroll Lock' key twice + 'Page Down' to select the next input port.
- Press 'Scroll Lock' key twice + '1' or '2' to select a specific input port (e.g., '1' for PC1, '2' for PC2).
- Mouse Gesture: Double-hit the left or right bound of the screen with the mouse pointer to switch inputs.
- Automatisk scanning: The KVM switch can be configured to automatically loop among all powered input sources within a specified time interval.
Figure 4: Various methods for switching between computers, including front panel button, IR remote, keyboard hotkeys, and mouse gesture.
Specifikationer
| Attribut | Detalje |
|---|---|
| Modelnummer | HKS201-E23 |
| Produktdimensioner | 7.72 x 3.15 x 0.94 tommer; 9.28 ounce |
| Fabrikant | TESmart |
| Operation Voltage | 5 volt (DC) |
| Video opløsning | Up to 3840x2160 (4K) @60Hz, 3440x1440@100Hz, 2560x1440@120Hz |
| USB-porte | Dedicated Keyboard/Mouse, 1x USB 2.0 Peripheral Port |
| Lydudgang | 3.5mm L/R Audio Jack |
Opretholdelse
To ensure the longevity and optimal performance of your TESmart HDMI KVM Switch, consider the following:
- Keep the device in a clean, dry environment, away from excessive dust, moisture, and extreme temperatures.
- Undgå at placere tunge genstande oven på kontakten.
- Gently clean the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Ensure all cables are securely connected to prevent signal loss or intermittent issues.
Fejlfinding
If you encounter any issues with your KVM switch, please refer to the official Troubleshooting Guide (PDF) available at: Fejlfindingsvejledning (PDF).
Common issues and basic checks include:
- Intet display/signal: Ensure all HDMI cables are securely connected to both the KVM switch and the computers/monitor. Verify the correct input is selected on the KVM switch.
- Tastatur/mus reagerer ikke: Check that the keyboard and mouse are plugged into the dedicated USB ports. If using wireless, ensure the receiver is properly inserted and batteries are charged. Try restarting the KVM switch.
- Display Settings Change After Switching: The built-in EDID emulators should prevent this. Ensure your monitor and graphics drivers are up to date.
- Genvejstastproblemer: Confirm the keyboard is connected to the dedicated keyboard USB port. Hotkey switching is not supported if the keyboard is connected to the USB 2.0 peripheral port.
Garanti og support
The TESmart HDMI KVM Switch comes with a 1-year warranty from the date of purchase.
For any questions, concerns, or technical assistance, please reach out to our customer experience design team. You can contact TESmart directly through the Amazon platform by navigating to the product page, clicking on 'Sold by TESmart', and then selecting 'Ask a question'.
Figure 5: TESmart offers 24/7 technical support.
