isinwheel HyperS

isinwheel HyperS el-løbehjul brugermanual

Model: HyperS

1. Introduktion

Thank you for choosing the isinwheel HyperS Electric Scooter. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your scooter. Please read this manual thoroughly before your first ride to ensure proper use and to maximize your riding experience.

Safety Warning: Always wear a helmet and appropriate safety gear when riding. Obey all local traffic laws and regulations. Riding an electric scooter carries inherent risks; ride responsibly.

isinwheel HyperS Electric Scooter with seat and basket

Image 1.1: The isinwheel HyperS Electric Scooter, featuring a seat and rear storage basket.

2. Pakkens indhold

Ved udpakning skal du kontrollere, at alle nedenstående varer er til stede og ubeskadigede. Hvis der mangler eller er beskadigede varer, skal du straks kontakte kundesupport.

  • isinwheel HyperS Electric Scooter (main unit)
  • Oplader
  • Værktøjssæt
  • Bagerste opbevaringskurv
  • Brugermanual

3. Opsætning og montering

Follow these steps to assemble your isinwheel HyperS Electric Scooter.

3.1 Udfoldning af scooteren

  1. Placer scooteren på en flad overflade.
  2. Locate the folding mechanism latch on the stem.
  3. Release the latch and carefully raise the handlebar stem until it locks into place. Ensure the locking mechanism is securely engaged.
isinwheel HyperS Electric Scooter folded and placed in a car trunk

Image 3.1: The scooter's foldable design allows for compact storage, such as in a car trunk.

3.2 Installing the Seat and Basket

  1. Insert the seat post into the designated tube on the scooter frame. Adjust the height to your preference and secure it with the quick-release clamp.
  2. Attach the rear storage basket to the mounting points on the rear frame using the provided screws and tools. Ensure it is firmly secured.
Close-up of the isinwheel HyperS Electric Scooter's rear storage basket with items inside

Image 3.2: The rear storage basket provides convenient space for personal items.

3.3 Indledende opladning

Before your first ride, fully charge the scooter's battery. Connect the charger to the charging port on the scooter and then to a power outlet. The indicator light on the charger will change (e.g., from red to green) when charging is complete. Charging time is approximately 5-6 hours.

4. Betjeningsvejledning

4.1 Tænd/sluk og display

Press and hold the power button on the intelligent display to turn the scooter on or off. The display shows key information such as current speed, battery level, riding mode (PAS level), and odometer/trip distance.

Close-up of the isinwheel HyperS Electric Scooter's intelligent display showing speed, battery, and other metrics

Image 4.1: The intelligent display provides essential riding information at a glance.

4.2 At køre på scooter

  1. Starter: Place one foot on the footboard and push off with the other foot to gain initial momentum. Gently press the throttle to engage the motor.
  2. Acceleration: Use the throttle on the handlebar to control your speed.
  3. Bremsning: The scooter is equipped with dual disc brakes. Squeeze the brake levers on the handlebars to slow down or stop. Apply both brakes simultaneously for optimal stopping power.
  4. Blinklys: Use the turn signal switch on the handlebar to indicate your turning direction. The rear taillight will flash accordingly.
Close-up of the isinwheel HyperS Electric Scooter's rear turn signal taillight in action

Image 4.2: The turn signal taillight enhances visibility and communication with other road users.

Close-up of the isinwheel HyperS Electric Scooter's dual disc brakes on front and rear wheels

Image 4.3: The dual disc brake system provides reliable stopping power.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din scooters lange levetid og optimale ydeevne.

5.1 Pleje af batterier

  • Oplad batteriet helt efter hver brug.
  • Undgå at dræne batteriet helt.
  • Hvis scooteren opbevares i en længere periode, skal batteriet oplades til 50-70% og genoplades hver 30-60 dage.
  • Opbevar batteriet på et køligt, tørt sted.

5.2 Dæktryk

Check tire pressure regularly. Maintain the recommended pressure (usually indicated on the tire sidewall) for optimal ride comfort, range, and tire life.

5.3 Bremsejustering

Periodically check the brake levers and cables for proper tension and responsiveness. If brakes feel loose or are not stopping effectively, adjust them or have them serviced by a qualified technician.

5.4 Rengøring og opbevaring

  • Rengør scooteren med annonceamp klud. Undgå at bruge højtryksvandstråler eller skrappe kemikalier.
  • Store the scooter in a dry, sheltered area to protect it from weather elements.

6. Fejlfinding

This section addresses common issues you might encounter with your isinwheel HyperS Electric Scooter.

ProblemMulig årsagLøsning
Scooteren tænder ikkeLow battery; loose battery connection; faulty power buttonCharge the battery; check battery connections; contact support if issue persists
Low speed or reduced rangeLow tire pressure; low battery charge; riding uphill; heavy loadInflate tires to recommended pressure; fully charge battery; ride on flat terrain; reduce load
Bremserne er ikke effektiveBrake cables loose; worn brake padsAdjust brake cable tension; replace brake pads; consult a technician
Usædvanlige lyde under driftLøse komponenter; snavs i hjul; motorproblemInspect scooter for loose parts; clear debris; contact support for motor issues

7. Specifikationer

Key technical specifications for the isinwheel HyperS Electric Scooter:

FeatureSpecifikation
ModelnavnHyperS
Motorkraft700W
TophastighedOp til 21 MPH
Batterikapacitet48V 10Ah (480Wh)
Maksimal rækkeviddeOp til 28 miles
OpladningstidCirka 5-6 timer
Vægtgrænse265 pund
Varens vægt72 pund
Hjulstørrelse14 tommer
Dæk typePneumatisk
OphængstypeDobbelt suspension
Bremse stilDobbelt skivebremse
Særlige funktionerFoldable, Full Suspension, Handy Hook, Storage Basket, Turn Signal Taillight
RammematerialeKulstofstål
Close-up of the isinwheel HyperS Electric Scooter's rear wheel with 700W motor detail and battery indicator

Image 7.1: The 700W motor provides powerful performance for urban commuting.

Diagram showing the internal components of the full suspension system on the isinwheel HyperS Electric Scooter

Image 7.2: The full suspension system ensures a comfortable ride by absorbing shocks.

8. Garanti og support

8.1 Garantioplysninger

The isinwheel HyperS Electric Scooter comes with a 1 års begrænset garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl i materialer og udførelse. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller normal slitage.

Gem venligst dit købsbevis for garantikrav.

8.2 Kundesupport

For technical assistance, warranty claims, or any questions regarding your isinwheel HyperS Electric Scooter, please contact our customer support team. Refer to the contact information provided with your purchase or visit the official isinwheel webwebsted for supportdetaljer.

Relaterede dokumenter - HyperS

Preview isinwheel GT2 elektrisk scooter brugermanual
Omfattende brugermanual til isinwheel GT2 elektrisk løbehjul, der dækker samling, betjening, sikkerhed, vedligeholdelse, specifikationer og garantioplysninger.
Preview iSinwheel S9PRO elektrisk scooter brugermanual
Brugermanual til iSinwheel S9PRO elektrisk løbehjul, der dækker pakkens indhold, produkt ovenståendeview, opladning, grundprincipper for kørsel, vedligeholdelse, specifikationer og fejlfinding.
Preview isinwheel S10 Max elektrisk løbehjul brugermanual - Sikkerhed, specifikationer og betjeningsvejledning
Omfattende brugermanual til isinwheel S10 Max elektrisk løbehjul. Dækker hurtigstart, sikkerhedsretningslinjer, produktoversigtview, opladning, vedligeholdelse, specifikationer, fejlfinding og app-brug.
Preview isinwheel GT4 elektrisk scooter brugermanual
Omfattende brugermanual til isinwheel GT4 elektrisk løbehjul, der dækker samling, betjening, indstillinger, specifikationer og fejlfinding. Lær, hvordan du opsætter, kører og vedligeholder dit GT4 løbehjul sikkert.
Preview isinwheel X3 & X3 Pro Electric Scooter User Manual | Safety, Specs, Warranty
Comprehensive user manual for the isinwheel X3 and X3 Pro electric scooters. Covers package contents, product overview, dashboard functions, assembly, safety guidelines, charging, riding basics, maintenance, specifications, warranty information, and FAQs.
Preview Brugermanual til Isinwheel GT1 elektrisk løbehjul
Omfattende brugermanual til Isinwheel GT1 elektrisk løbehjul, der dækker montering, produktbeskrivelseview, indstillinger, appbrug, kørselsmeddelelser, opladning, vedligeholdelse og specifikationer. Indeholder sikkerhedsretningslinjer og garantioplysninger.