DEERC D20S Drone med Kamera 1080P Brugsanvisning

1. Introduktion

This manual provides essential information for the safe operation and maintenance of your DEERC D20S Drone. Please read this manual thoroughly before operating the aircraft to ensure proper function and to avoid damage or injury. Keep this manual for future reference.

2. Produktet er slutview

2.1 Pakkens indhold

The DEERC D20S package includes the following components:

• DEERC D20S Drone (with integrated 1080p HD FPV Camera)
• Fjernbetjening
• 2 x Lithium Polymer batterier
• Spare Propellers (set)
• USB opladningskabel
• Skruetrækker
• Instruktionsmanual

Image: DEERC D20S Drone, remote control, batteries, propellers, and charging cable.

2.2 Nøglefunktioner

• 1080P HD FPV-kamera: Adjustable camera for real-time video transmission.
• Sammenfoldeligt design: Kompakt og bærbar for nem transport.
• Børsteløs motor: Provides powerful and stable flight with improved wind resistance.
• Højdehold: Maintains a stable altitude for easy control.
• Optisk flowpositionering: Enhances stability for both indoor and outdoor flight.
• 3D-vendinger: Udfør luftstunts med lethed.
• Hovedløs tilstand: Simplifies flight orientation, especially for beginners.
• Start/landing med én knap: Simplifies starting and ending flights.
• Nødstop: Immediate shutdown for safety.
• 3 hastighedstilstande: Adjustable flight speed for different skill levels.
• Bevægelseskontrol: Use hand gestures to take photos or videos.
• Lang flyvetid: Two batteries provide up to 30 minutes of flight.

3. Opsætning

3.1 Batteriinstallation og opladning

Ensure batteries are fully charged before first use. The drone comes with 2 Lithium Polymer batteries.

1. Sæt det fuldt opladede batteri i dronens batterirum, indtil det klikker på plads.
2. To charge the battery, connect the USB charging cable to the battery and a suitable USB power source (e.g., computer, USB wall adapter).
3. The charging indicator will show the charging status. Ensure the battery is fully charged before use.

Image: Illustration of drone battery being charged via USB cable. The image highlights low power alarm and overcharge protection features.

3.2 Propelinstallation

The drone comes with pre-installed propellers. If replacement is needed, use the provided screwdriver to carefully remove and install new propellers, ensuring correct orientation (A/B labels).

3.3 Opsætning af fjernbetjening

Insert 3 AAA batteries (not included) into the remote control. Extend the phone holder to mount your smartphone for FPV viewing og app-kontrol.

Image: A person holding the remote control with a smartphone mounted, showing the FPV view.

3.4 App-forbindelse

Download the DEERC FPV app from your smartphone's app store. Connect your smartphone to the drone's Wi-Fi network (usually named "DEERC-D20S-XXXX"). Once connected, open the app to view the live camera feed and access additional flight controls.

4. Betjeningsvejledning

4.1 Tjekliste før flyvning

• Sørg for, at batterierne til dronen og fjernbetjeningen er fuldt opladet.
• Unfold the drone arms completely.
• Placer dronen på en flad, plan overflade.
• Connect your smartphone to the drone's Wi-Fi and open the app.

4.2 Start og landing

1. Tænd: Tryk og hold tænd/sluk-knappen på dronen nede, indtil indikatorlamperne tændes.
2. Parring: Turn on the remote control. Push both joysticks down and outwards simultaneously to pair the remote with the drone. The drone's lights will stop flashing and become solid when paired.
3. Start med én knap: Press the One-Key Takeoff button on the remote control (or in the app). The drone will automatically lift off and hover at a stable altitude.
4. Manuel start: Alternatively, after pairing, push both joysticks down and inwards to arm the motors. Then, push the left joystick up to manually take off.
5. One-key landing: Press the One-Key Landing button on the remote control (or in the app). The drone will automatically descend and land.

Image: A person operating the drone with the remote control, showing the drone hovering after takeoff.

4.3 Grundlæggende flyvekontrol

• Venstre joystick (gas/drej):
  • Push up/down: Increase/decrease altitude.
  • Push left/right: Rotate drone left/right (yaw).
• Højre joystick (Hældning/Rulning):
  • Push up/down: Move drone forward/backward (pitch).
  • Push left/right: Move drone left/right (roll).

4.4 Avancerede funktioner

• Højdehold: The drone automatically maintains its current altitude, allowing for easier control of direction.
• Hovedløs tilstand: Activates a mode where the drone's orientation is relative to the pilot, simplifying control regardless of the drone's actual front direction.
• 3D-vendinger: Press the 3D Flip button on the remote, then push the right joystick in any direction to perform a flip.
• Cirkelflue: The drone will fly in a circular path around a central point.
• Bevægelseskontrol: Use specific hand gestures in front of the camera to trigger photo or video recording. Refer to the app for specific gestures.
• Hastighedstilstande: Toggle between 3 speed settings (low, medium, high) to adjust the drone's responsiveness and speed.

Image: Visual representation of the drone performing 3D flips, high speed rotation, and circle fly functions.

Image: Drone hovering stably due to optical flow positioning, and a close-up of the brushless motor.

4.5 Kamerabetjening

The DEERC D20S is equipped with a 1080p HD FPV camera. You can control the camera and view the live feed via the app.

• Juster kameravinkel: Use the dedicated buttons on the remote control to adjust the camera's vertical angle (up/down) during flight.
• Foto/video: Use the app interface or dedicated buttons on the remote control to capture photos (2 MP effective still resolution, JPEG format) or record videos (1080p resolution, MP4 format).

Image: Details of the 1080P HD FPV camera, including 90° remote adjustable FOV and comparison of 1080p vs 720p video quality.

5. Vedligeholdelse

• Rensning: Regularly clean the drone body and propellers with a soft, dry cloth. Avoid using water or solvents.
• Udskiftning af propel: Inspect propellers for damage before each flight. Replace any bent or broken propellers using the provided screwdriver and spare parts.
• Batteripleje: Store batteries in a cool, dry place. Do not overcharge or over-discharge batteries. Disconnect batteries from the drone when not in use.

6. Fejlfinding

If the drone fails to take off or exhibits unstable flight, ensure the following:

• All propellers are correctly installed and undamaged.
• Batteries (drone and remote) are fully charged.
• The drone is placed on a flat, level surface before pairing and takeoff.
• The remote control is properly paired with the drone.
• Perform a calibration if flight is unstable (refer to manual for calibration steps).

7. Specifikationer

8. Garanti og support

For warranty information, technical support, or replacement parts, please refer to the contact information provided in the product packaging or visit the official DEERC webwebsted.

DEERC offers protection plans for extended coverage. Please check the product listing or DEERC's official channels for details on available 2-Year and 3-Year Protection Plans, as well as Complete Protect options.