Pixio PX277 OLED MAX 27-tommer QHD 240Hz Gaming-skærm Brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your Pixio PX277 OLED MAX 27-inch QHD 240Hz Gaming Monitor. Please read this manual thoroughly before using the product and retain it for future reference. This monitor features a 27-inch WOLED panel, QHD (2560x1440) resolution, a 240Hz refresh rate, and a 0.03ms GTG response time, designed for high-performance gaming and productivity.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre skader på skærmen eller personskade.

• Udsæt ikke skærmen for regn, fugt eller ekstreme temperaturer.
• Sørg for korrekt ventilation omkring skærmen.
• Brug kun den strømadapter, der følger med skærmen.
• Undgå at placere tunge genstande på netledningen.
• Forsøg ikke selv at skille skærmen ad eller reparere den. Overlad al service til kvalificeret personale.
• Rengør skærmen med en blød, fnugfri klud. Undgå at bruge skrappe kemikalier.

3. Pakkens indhold

Bekræft, at alle varer er til stede i din produktpakke:

• Pixio PX277 OLED MAX Monitor
• Monitorstativ (base og hals)
• Strømadapter og strømkabel
• DisplayPort-kabel
• USB-B to USB-A Cable (for KVM and USB hub functionality)
• Brugervejledning (dette dokument)

4. Monitor Overview

4.1 Foran View

The front of the monitor features the 27-inch WOLED display panel. The Pixio logo is typically located at the bottom center of the bezel.

Figur 4.1: Forside view of the Pixio PX277 OLED MAX monitor.

4.2 bag View og havne

The rear of the monitor houses the input/output ports and the OSD control joystick/buttons. The stand attaches to the VESA mount area.

Figur 4.2: Bagside view af skærmen med portmærkater.

Portbeskrivelser:

• Stik til øretelefoner: 3.5 mm lydudgang.
• DP 1.4: DisplayPort input for up to 1440p at 240Hz.
• HDMI 2.0 (x2): HDMI inputs for up to 1440p at 144Hz.
• Type-C (65W PD): USB-C input for video (1440p@240Hz), data, and power delivery (up to 65W).
• USB A (Down) (x2): USB 3.0 downstream ports for connecting peripherals.
• USB B (Up): USB 3.0 upstream port to connect to your computer for KVM and USB hub functionality.
• DC: Strømindgang til den eksterne strømadapter.

5. Opsætning

5.1 Montering af stativ

1. Tag forsigtigt skærmens og stativets komponenter ud af emballagen.
2. Fastgør stativets hals til skærmpanelet med de medfølgende skruer.
3. Fastgør stativets base til stativets hals.
4. Placer den samlede skærm på en stabil, plan overflade.

Figure 5.1: Monitor with adjustable stand.

5.2 Tilslutning til en enhed

Connect your computer or console to the monitor using the appropriate cables.

• DisplayPort: For optimal performance (1440p @ 240Hz), connect a DisplayPort cable from your graphics card to the monitor's DP 1.4 port.
• HDMI: Connect an HDMI cable from your device to one of the monitor's HDMI 2.0 ports (supports 1440p @ 144Hz).
• USB-C: For compatible devices, connect a USB-C cable to the monitor's Type-C port for video (1440p @ 240Hz), data, and up to 65W power delivery.
• USB opstrøms: Connect the USB-B to USB-A cable from the monitor's USB B (Up) port to your computer's USB-A port to enable the monitor's USB hub and KVM functionality.
• Magt: Connect the power adapter to the monitor's DC input and then plug it into a power outlet.

5.3 KVM-switchens funktionalitet

The built-in KVM switch allows you to control two devices (e.g., a PC and a laptop) with a single keyboard and mouse connected to the monitor's USB A (Down) ports. To use KVM:

1. Connect your keyboard and mouse to the USB A (Down) ports on the monitor.
2. Connect the monitor's USB B (Up) port to your primary device (e.g., PC) using the USB-B to USB-A cable.
3. Connect your secondary device (e.g., laptop) to the monitor via the USB-C port. This single USB-C cable will handle video, data, and power for the laptop, enabling KVM control.
4. Switch between devices using the OSD menu or a dedicated hotkey (refer to OSD section for details).

Figure 5.2: KVM switch connectivity example.

Figure 5.3: USB-C connection for display, data, and charging.

6. Betjeningsvejledning

6.1 OSD (On-Screen Display) menu navigation

The monitor's settings are controlled via an OSD menu, typically accessed and navigated using a joystick or buttons located on the rear of the monitor.

Figure 6.1: OSD Menu Interface.

Almindelige OSD-menukategorier:

• Vise: Adjust brightness, contrast, sharpness, and other image parameters.
• Farve: Fine-tune color temperature, gamma, and color space settings.
• Spilopsætning: Configure gaming-specific features such as Adaptive Sync, response time overdrive, and on-screen crosshairs.
• Avancerede indstillinger: Access OLED Panel Care options, HDR settings, and KVM switching.
• Input: Manually select the input source (DisplayPort, HDMI 1, HDMI 2, USB-C).
• System opsætning: General monitor settings like language, OSD timeout, and factory reset.

6.2 Nøglefunktioner og indstillinger

• Adaptiv synkronisering: This technology synchronizes the monitor's refresh rate with your graphics card's frame rate to eliminate screen tearing and stuttering. Enable this in the OSD's 'Gaming Setup' menu for a smoother gaming experience.

Figure 6.2: Adaptive Sync in action.
• HDR (High Dynamic Range): The monitor supports HDR for enhanced contrast and color vibrancy. Enable HDR in your operating system settings and the monitor's OSD for compatible content.
• KVM-switch: As detailed in Section 5.3, use the OSD to switch control between connected devices when using the KVM feature.
• OLED Panel Care: To maintain the longevity and performance of the OLED panel, the monitor includes features like Screen Care, Deep Care, and Screensaver. These can be configured in the 'Advanced Settings' menu. It is recommended to allow these functions to run periodically.


Figure 6.3: OLED Panel Care settings in OSD.

• Justerbart stativ: The monitor stand offers height adjustment, tilt, swivel, and pivot (90-degree rotation) for ergonomic viewing. Adjust the monitor to your preferred position for comfort.


Figure 6.4: Adjustable stand features.

7. Vedligeholdelse

7.1 Rengøring af monitoren

• Tag altid stikket ud af stikkontakten før rengøring.
• Brug en blød, tør og fnugfri klud til forsigtigt at tørre skærmen og de udvendige overflader af.
• For genstridige mærker, gnid letampRengør kluden med vand eller et mildt, ikke-slibende skærmrensemiddel. Sprøjt ikke væske direkte på skærmen.
• Avoid using alcohol, ammonia, or abrasive cleaners, as they can damage the screen or casing.

7.2 OLED Panel Care

OLED technology offers superior image quality but requires specific care to prevent potential image retention (burn-in). The monitor includes built-in features to mitigate this:

• Skærmpleje: A pixel refresh function that runs automatically after a certain period of use or when the monitor enters standby.
• Dyb pleje: A more thorough pixel refresh that takes longer to complete. It is recommended to run this periodically.
• Pauseskærm: Activates after a set idle time to prevent static images from remaining on the screen for too long.

It is recommended to enable and allow these features to operate as designed. Avoid displaying static images for extended periods, and utilize screen savers or power-saving modes when not actively using the monitor.

8. Fejlfinding

Hvis du støder på problemer med din skærm, kan du se følgende almindelige problemer og løsninger:

If the problem persists after attempting these solutions, please contact Pixio customer support.

9. Specifikationer

10. Garanti og support

Pixio products are covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Pixio website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or service inquiries, please contact Pixio customer support through their official channels.