1. Introduktion
The WANLUTECH MOT-73 is a versatile optical fiber tester designed for comprehensive network and fiber optic analysis. It integrates multiple functions including OTDR, Optical Power Meter (OPM), Visual Fault Locator (VFL), Light Source (LS), Optical Loss Test (OLT), RJ45 Cable Tester, and various network tools. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device.
2. Sikkerhedsoplysninger
Please read and understand all safety warnings before operating the device to prevent injury or damage. Keep this manual for future reference.
- Lasersikkerhed: The Visual Fault Locator (VFL) and Light Source (LS) emit visible and invisible laser radiation. DO NOT look directly into the optical output port or into the fiber end when the VFL or LS is active. Direct exposure to laser light can cause severe eye damage.
- Batterisikkerhed: The device contains a Lithium-Ion battery. Do not disassemble, puncture, or expose the battery to extreme temperatures or fire. Use only the provided charger.
- Miljøforhold: Operate the device within specified temperature and humidity ranges. Avoid exposure to water, dust, or corrosive substances.
- Opretholdelse: Refer all servicing to qualified personnel. Do not attempt to repair the device yourself.
3. Opsætning
3.1 Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- WANLUTECH MOT-73 OTDR Multi-function Tester
- Værktøjstaske
- OTDR-testrapport
- FC/UPC-FC/APC Cable
- Li-ion Battery (pre-installed)
- RJ45 to BNC Connector
- BNC Alligator Clip Cable
- Oplader
- SC/UPC male to SC/APC female adapter
- Kabelsporer
- Sikkerhedskort
- SC, FC, ST, LC Connectors
- FC to FC Connector
- FC to SC Connector
- FC (male) - LC (female) adapter
Image: Included accessories and the MOT-73 tester.
3.2 Første batteriforberedelse
Before first use, open the battery cover and remove the paper piece isolating the battery. This ensures proper electrical contact for operation and charging.
Billede: Bagside view of the MOT-73 tester highlighting the battery compartment and the instruction to remove the paper piece.
3.3 Enhed overview
Familiarize yourself with the ports and controls of the MOT-73 tester:
Billede: Detaljeret view of the top and bottom panels of the MOT-73, indicating ports such as Network testing port/RJ45 TDR, PSE/PoE voltage measurement, DC5V/2A power output, LED lamp, OTDR/LS, Visual Fault Locator, Optical Power Meter, Power button, 12V/1A input, Reset, and UTP/Cable tracer port.
- Toppanel: Network testing port / RJ45 TDR, PSE/PoE voltage measurement, DC5V/2A power output, LED lamp, OTDR/LS port, Visual Fault Locator (VFL) port, Optical Power Meter (OPM) port, Power button.
- Bundpanel: 12V/1A input, Reset button, UTP / Cable tracer port.
4. Betjeningsvejledning
4.1 Generel navigation
The MOT-73 features a 7-inch IPS touchscreen for intuitive operation. Navigate through the various functions by tapping the corresponding icons on the main screen.
Image: The main screen of the WANLUTECH MOT-73 showing various application icons for different testing functions.
4.2 OTDR Test
The OTDR (Optical Time Domain Reflectometer) function is used to characterize optical fibers. It supports 1310nm/1550nm wavelengths with a dynamic range of 28dB/26dB. Note: This model cannot test live fiber.
Image: Screenshots illustrating the 'Quick Setup' mode for rapid configuration and 'Parameters Set' mode for detailed, professional OTDR test parameter adjustments.
- Hurtig opsætningstilstand: Allows for fast configuration of wavelength, distance range, pulse width, and measurement duration.
- Parametreindstillingstilstand: For professional technicians, this mode enables detailed adjustment of wavelength, distance range, pulse width, measurement mode, IOR, non-reflection threshold, end threshold, and other parameters for more accurate curve results.
4.2.1 Begivenhedskort
The Event Map visualizes fiber optic link inspections, presenting information like fiber length, connector type, fusion points, or breakpoints in an easy-to-understand graphical format. It supports saving, viewing, zooming, and moving curves for detailed analysis. Event Blind Zone is less than 1.6m, and Attenuation Blind Zone is less than 8m.
Image: The Event Map interface showing graphical representation of fiber events and the Threshold Setting menu for defining pass/fail criteria.
4.2.2 Analyse af flere spor
The device supports displaying up to four OTDR curves simultaneously for comprehensive analysis, allowing for comparison of different tests or wavelengths.
Image: The multi-track analysis screen displaying four different OTDR curves for comparative evaluation.
4.3 Optisk effektmåler (OPM)
The OPM measures optical power linearly or non-linearly. It is calibrated for wavelengths 850/1300/1310/1490/1550/1625nm with a measurement range of -70 to +10 dBm.
Image: The Optical Power Meter interface showing a power reading and selectable calibrated wavelengths.
4.4 Visuel fejlfinder (VFL)
The VFL helps determine fiber continuity and locate faults. It operates at a 650nm wavelength with a maximum test range of 8 KM. Warning: Visible light source. Do not look directly at the light to avoid eye contact.
Image: The Visual Fault Locator interface displaying a warning about laser light and options for steady or modulated output.
4.5 Lyskilde (LS)
The LS function provides a stable light source for engineering and maintenance of optical fiber communication and CATV fiber parameter setting. It supports CW/270 Hz/330 Hz/1 kHz/2 kHz modulation modes at 1310nm/1550nm.
Image: The Light Source interface showing wavelength selection, mode options (CW, 270Hz, 330Hz, 1kHz, 2kHz), and power adjustment.
4.6 Optical Loss Test (OLT)
The OLT function is used to test the insertion loss of optical passive devices. Connect the OTDR/LS port and OPM port with short fiber optic patch cables. After the power stabilizes, click "Set Parameter" and then connect the device under test.
Image: The Optical Loss Test interface displaying optical power meter readings and relative power, with options to set parameters and view forbindelsesdiagrammer.
4.7 Cable Tracer & Cable Tester
The Cable Tracer function helps locate BNC, network, and telephone cables within cluttered bundles, including shielded cables. The Cable Tester function checks UTP cable connection status and displays near-end, mid-end, and far-end fault points.
Image: Illustrations of the Cable Tracer in use for identifying cables and the Cable Tester interface showing connection status and fault locations.
4.8 RJ45-kabel TDR-test
This function tests cable pair status, length (up to 180 meters), attenuation (for network cables exceeding 10 meters), reflectivity, impedance, and skew.
Image: The RJ45 Cable TDR Test interface displaying cable pair status, length, and advanced test results for reflectivity, impedance, and skew.
4.9 Test af kabellængde
Measure the breakpoint position (open circuit status) for BNC cables, RJ45 network cables, and RJ11 cables, with a maximum test length of 3000 meters. Note that short-circuit status will not display cable length.
Image: The Cable Length Test interface showing graphical representation of cable pairs and their measured lengths.
4.10 Netværksværktøjer
The MOT-73 includes various network testing tools:
- Ping test: Tests connectivity and response time to IP cameras or other network devices.
- IP-scanning: Quickly finds IP addresses, MAC addresses, and camera manufacturers of devices connected to the tester.
- FTP-servering: Tillader kopiering og redigering files from the SD card without using an SD card reader.
- LLDP: Detects capabilities, management IP addresses, device info, port info, and other switch information (requires LLDP protocol support on the switch).
- Portblinkning: Connects to the LAN port to flash the port LED on a switch, helping to quickly identify connected cables.
- PPPOE: Used to detect if broadband PPPOE dialing is normal.
- Link Monitor: Monitors network link status.
Image: Screenshots of various network tools including Ping, IP Scan, FTP Serve, LLDP, Port Flashing, and PPPOE.
4.11 WiFi-analysator
Supports analysis of WiFi signal strength, channel, and level. It can also create a WiFi hotspot.
Image: The WiFi Analyzer interface showing signal strength and channel charts, alongside the PoE Detection interface.
4.12 PoE-detektion
Måler PoE-switch eller PSE-strømforsyningsvolumentage and cable connection status. The power supply port of the PoE switch or PSE power supply equipment must be connected to the PSE In port of the OTDR tester.
Image: The PoE Detection interface displaying power supply voltage and cable connection status for PoE devices.
4.13 File Management & Test Reports
The device allows saving test curves and event lists. Test reports can be generated in EXCEL and PDF formats, including curve trajectory graphs, parameter settings, fiber event information, and fiber link information. The SOR standard file format er understøttet.
Image: Screenshots showing the Test Report generation, File Setting options for automatic naming and format, and the File Management interface for viewing and organizing saved test data.
4.14 TesterPlay (Screen Projection)
The "TesterPlay" app supports displaying the tester's screen on a PC or mobile phone simultaneously. Install the "TesterPlay" app on Android mobile phones or VLC player on PC to receive real-time screen information from the tester. The RTSP stream can be accessed at rtsp://192.168.0.130:554/v0 (IP address may vary).
Image: The TesterPlay feature demonstrating screen projection from the MOT-73 to a PC and an Android mobile phone.
5. Vedligeholdelse
Proper maintenance ensures the longevity and accuracy of your WANLUTECH MOT-73 tester.
- Rensning: Use a soft, dry cloth to clean the device's exterior. For the touchscreen, use a screen-specific cleaning solution and a microfiber cloth. Keep optical ports clean using appropriate fiber optic cleaning tools.
- Opbevaring: Opbevar enheden i dens beskyttende værktøjstaske på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Batteripleje: For long-term storage, charge the battery to approximately 50% and recharge every 3-6 months to prevent deep discharge.
- Softwareopdateringer: Tjek producentens webwebstedet regelmæssigt for firmwareopdateringer for at sikre optimal ydeevne og adgang til nye funktioner.
6. Fejlfinding
This section addresses common issues you might encounter with your MOT-73 tester.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Battery not charged or paper insulator still present. | Ensure battery is charged. Remove the paper insulator from the battery compartment. |
| OTDR test results are inaccurate. | Incorrect parameters set or dirty optical connectors. | Verify OTDR parameters in 'Parameters Set Mode'. Clean all optical connectors thoroughly. |
| VFL/LS light is weak or absent. | Dirty optical port or device malfunction. | Clean the VFL/LS optical port. If the issue persists, contact support. |
| Cable Tester shows incorrect results. | Poor cable connection or damaged cable. | Ensure cables are properly seated. Inspect cables for damage. |
| Network tools not functioning. | Incorrect network configuration or cable connection. | Verify network cable connections. Check IP settings and ensure target devices are online. |
7. Specifikationer
Key technical specifications for the WANLUTECH MOT-73 Optical Fiber Tester:
- Modelnummer: MOT-73
- OTDR Wavelength: 1310nm/1550nm
- OTDR Dynamic Range: 28dB / 26dB
- Event Blind Zone: <1.6 m
- Attenuation Blind Zone: <8 m
- Optical Power Meter Calibrated Wavelengths: 850/1300/1310/1490/1550/1625nm
- VFL Wavelength: 650 nm
- VFL Max Test Range: 8 KM
- Light Source Modes: CW/270 Hz/330 Hz/1 kHz/2 kHz
- Vise: 7 tommer IPS touchskærm
- Batteri: 7.4V 7800 mAh Lithium Ion (included)
- Ethernet-porte: Dual Gigabit (10/100/1000Mbps adaptive)
- WiFi: Built-in 2.4G, 150M speeds, WiFi analyzer
- PoE-detektion: Ja
- Strømindgang: DC12V/1A
- Strømudgang: DC5V/2A
- RJ45 Cable TDR Test Length: Max 180 meter
- Cable Length Test (BNC, RJ45, RJ11): Max 3000 meter
- Processor: 1.6GHz 4-cores CPU
- Hukommelse: 1GB RAM, 8GB FLASH (eMMC)
- Pakkedimensioner: 11.22 x 9.45 x 3.74 tommer
- Varens vægt: 3.97 pund
Image: The 7-inch touchscreen display and internal hardware specifications including CPU, RAM, and Flash memory.
8. Garanti og support
WANLUTECH is committed to providing quality products and customer support.
- Fabrikant: GUANGZHOU WANGLU TECHNOLOGY CO.,LTD
- Støtte: For any questions or technical assistance, please contact WANLUTECH customer support. You can typically find support options through your purchase platform or the official WANLUTECH webwebsted.
- Kontakt support: If purchased via Amazon, you can find your order on your Amazon account, view order details, and click 'get product support' to message the seller. Alternatively, locate 'WANGLU TESTER' on the product detail page and use the messaging option.
