Produkt overview
This document provides detailed instructions for the installation and use of the SPI SC-01003 Replacement Start/Reverse Button Kit. This kit is designed as a direct replacement for the original equipment manufacturer (OEM) part number 0609-535, specifically for compatible Arctic Cat snowmobile models. The kit includes the start/reverse button and two springs, ensuring a complete and reliable replacement.
Image: The SPI SC-01003 Replacement Start/Reverse Button Kit, showing the black button with white forward (F) and reverse (R) arrows, along with two small metal springs.
Dele inkluderet i sættet
| ANTAL | BESKRIVELSE |
|---|---|
| 2 | Forår |
| 1 | Omvendt knap |
| 1 | Instruktionsark |
Note: While two springs are included, only one is typically required for installation. The second spring is provided as a spare.
Installation Instructions (Setup)
Please read all instructions carefully before beginning the installation of the Handlebar Control Reverse/Start Button Kit. Professional installation is recommended if you are not familiar with snowmobile electrical systems.
Image: Official instruction sheet showing detailed diagrams for button removal and installation, including spring placement and button alignment.
- Prepare the Handlebar: If your snowmobile is equipped with a handlebar cover, carefully remove it to access the control assembly.
- Remove Existing Button: Carefully remove the existing reverse button from the handlebar control.
- Loosen Handlebar Cap Screws: Loosen all four cap screws that secure the handlebar cap to the riser. This step is necessary to allow for handlebar rotation.
- Rotate Handlebar: Rotate the handlebar so that the control assembly is facing upwards. This provides better access for the button installation.
- Installer ny fjeder: Install one of the new springs into the designated cavity of the left-side handlebar control. Refer to "DETAIL A" in the instruction sheet image above for visual guidance on spring placement.
- Install Reverse Button: Press the new reverse button into place. Ensure the button aligns correctly with the tab in the left handlebar control. The button should snap securely into place. Refer to the "PRESS HERE TO ASSEMBLE" diagram in the instruction sheet image above for visual guidance.
- Adjust and Secure Handlebar: Readjust the handlebar to the operator's desired position. Once positioned, tighten the four cap screws to 15 ft-lb to secure the handlebar.
IMPORTANT NOTE: The kit includes two springs. Only one spring is required for installation of the new button. The second spring is provided as a spare in case one is lost during the installation process or for future use.
Betjening af knappen
The SPI SC-01003 button functions as a combined start and reverse control, depending on your snowmobile's specific wiring and original setup. Typically, pressing the button will engage the designated function (either start or reverse). Refer to your snowmobile's owner's manual for specific operational details related to the start/reverse system.
Billede: Bagside view of the SPI SC-01003 button, showing the clear plastic housing and metal backing plate where the electrical connections would be made.
Kompatibilitet
This replacement button kit is compatible with various Arctic Cat snowmobile models. Please verify your model year and specific model against the list below to ensure compatibility:
- 2019 M6000 Alpha One
- 2019 M6000 SE ES
- 2020 M8000 Alpha One
- 2019 M8000 Hardcore
- 2020-2023 M8000 Hardcore Alpha One
- 2020-2023 M8000 Hardcore Alpha One ES
- 2019 M8000 Mountain Cat
- 2019-2023 M8000 Mountain Cat Alpha One
- 2021-2023 M8000 Mountain Cat Alpha One ATAC
- 2020-2023 M8000 Mountain Cat Alpha One ES
- 2022-2023 M8000 Mountain Cat Alpha One ES ATAC
- 2019/2021 M8000 Mountain Cat ES
- 2019 M8000 Sno Pro
- 2019 M8000 Sno Pro ES
- 2019 Norseman 6000 ES
- 2019 Norseman X 6000
- 2019/2021-2023 Norseman X 8000
- 2019 Pantera 6000 ES
- 2020-2022 Riot 6000
- 2020-2023 Riot 8000
- 2022-2023 Riot 8000 ATAC
- 2020-2023 Riot X 8000
- 2022-2023 Riot X 8000 ATAC
- 2023 Riot 9000 ATAC
- 2019 XF 6000 Cross Country Limited ES
- 2019 XF 6000 High Country ES
- 2019 XF 8000 Cross Country Limited ES
- 2019 XF 8000 High Country
- 2019 XF 8000 High Country Limited ES
- 2023 ZR 6000
- 2019 ZR 6000 ES
- 2019-2022 ZR 6000 Limited ES
- 2019-2020 ZR 6000 Limited ES iACT
- 2021 ZR 6000 Limited ES ATAC
- 2020-2023 ZR 6000 R XC
- 2023 ZR 6000 R XC ES
- 2019/2022 ZR 6000 RR ES
- 2019-2020 ZR 6000 Sno Pro ES
- 2023 ZR 8000
- 2023 ZR 8000 ATAC
- 2019 ZR 8000 ES
- 2019-2022 ZR 8000 Limited ES
- 2019-2020 ZR 8000 Limited ES iACT
- 2021-2022 ZR 8000 Limited ES ATAC
- 2019-2022 ZR 8000 RR ES
- 2019-2020 ZR 8000 Sno Pro ES
- 2020-2022 ZR 9000 Thundercat
- 2020 ZR 9000 Thundercat iACT
- 2021-2022 ZR 9000 Thundercat ATAC
- 2022 ZR 9000 Thundercat EPS
- 2022-2023 ZR 9000 Thundercat EPS ATAC
Specifikationer
| Attribut | Detalje |
|---|---|
| Fabrikant | SPI |
| Mærke | SPI |
| Modelnummer | SC-01003 |
| OEM Part Number Replaced | 0609-535 |
| Materiale | Metal (for internal components/springs) |
| Varens vægt | 113 g (ca. 0.25 lbs) |
| Farve | Sort |
| Type køretøjstjeneste | Snescooter |
| Tilpasningstype | Køretøjsspecifik pasform |
Opretholdelse
The SPI SC-01003 Replacement Start/Reverse Button Kit is designed for durability and minimal maintenance. However, regular inspection can prolong its lifespan:
- Visuel inspektion: Periodically check the button for any signs of physical damage, cracks, or excessive wear.
- Renhed: Keep the area around the button clean from dirt, ice, and debris, which can impede its operation. Use a soft cloth to wipe the surface.
- Funktionstjek: Before each ride, ensure the button depresses smoothly and returns to its original position without sticking.
Fejlfinding
If you experience issues with your SPI SC-01003 Replacement Start/Reverse Button, consider the following common troubleshooting steps:
- Knap svarer ikke:
- Ensure the button is correctly seated and snapped into place as per installation instructions.
- Check for any obstructions (dirt, ice) preventing the button from fully depressing.
- Verify electrical connections to the button are secure and free from corrosion.
- Inspect the spring for proper tension and placement.
- Knap klæbende:
- Clean around the button to remove any debris.
- Ensure the button is not misaligned within its housing.
- Intermitterende funktion:
- Kontroller for løse eller korroderede ledningsforbindelser.
- Ensure the button is fully depressing and making proper contact internally.
If issues persist after performing these checks, it is recommended to consult a qualified snowmobile technician or contact SPI customer support.
Garanti og support
Specific warranty details for the SPI SC-01003 Replacement Start/Reverse Button Kit are not provided within this document. For information regarding product warranty, technical support, or replacement parts, please contact the manufacturer, SPI, directly through their official webwebsted eller kundeservicekanaler.
Always refer to the official SPI website or product packaging for the most current warranty and support information.
