Brugsanvisning til Linkind Smart Light Bulbs

1. Introduktion

Thank you for choosing Linkind Smart Light Bulbs. These advanced LED bulbs are designed to enhance your home lighting experience with smart features, energy efficiency, and a wide range of customizable colors. This manual provides essential information for installation, operation, and maintenance to ensure optimal performance and safety.

Four Linkind Smart Light Bulbs in packaging, highlighting 1600 lumens and compatibility with AiDot, Alexa, and Google Home.

Image: Linkind Smart Light Bulbs (4-pack)

2. Sikkerhedsoplysninger

Please read and understand all safety instructions before installing or using your Linkind Smart Light Bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.

Kun indendørs brug: These bulbs are designed for indoor use in dry locations. Do not use them in wet or damp miljøer.
Not for Dimmer Switches: Do not use these smart bulbs with traditional dimmer switches. They are dimmable only via the AiDot App or voice control. Using them with dimmer switches may cause flickering, buzzing, or damage to the bulb.
Proper Voltage: Sørg for, at voltage in your fixture is compatible with the bulb's specifications (100-120 Volts, 60 Hertz).
Installation: Always turn off the power to the fixture before installing or removing the bulb.
Undgå overophedning: Do not install in fully enclosed fixtures that may trap heat, as this can shorten the bulb's lifespan.
Bortskaffelse: Bortskaf elektroniske komponenter ansvarligt i henhold til lokale bestemmelser.

Diagram showing different bulb sizes (A15, A19, A21) and a warning not to use with dimmer switches.

Image: Bulb Size Compatibility and Dimmer Switch Warning

3. Hvad er der i æsken

Your Linkind Smart Light Bulbs package includes:

Linkind Smart Light Bulb(s) (Quantity as per pack size)

4. Opsætning

4.1 Indledende installation

Unpack the Linkind Smart Light Bulb(s) from the packaging.
Ensure the power to your light fixture is turned OFF at the switch before installation.
Carefully screw the Linkind Smart Light Bulb into a standard E26 light socket.
Turn ON the power to the light fixture. The bulb should light up.

4.2 AiDot App Connection

The AiDot App is required for initial setup and full control of your Linkind Smart Light Bulbs.

Download AiDot App fra App Store (iOS) eller Google Play Store (Android).
Open the AiDot App and sign in or create a new account.
Tap the "+" icon or "Add Device" to begin pairing.
Select "Smart Light Bulb" from the list of devices.
Follow the on-screen instructions in the app to connect the bulb. Ensure your phone's Wi-Fi and Bluetooth are enabled. The initial setup requires both 2.4GHz Wi-Fi and Bluetooth.

Diagram showing the steps to connect the smart light bulb using the AiDot app.

Image: AiDot App Connection Steps

4.3 Integrating with Alexa or Google Home

After successfully connecting your bulbs to the AiDot App, you can link them with Amazon Alexa or Google Home for voice control.

In the AiDot App, navigate to Integration.
Vælge Amazon Alexa or Google Home.
Follow the prompts to link your AiDot account with your Alexa or Google Home account. This typically involves signing into your Amazon or Google account within the AiDot app.
Once linked, your Linkind Smart Light Bulbs will appear in your Alexa or Google Home app, ready for voice commands.

A living room scene with smart devices and text indicating voice control with Alexa and Google Home.

Image: Voice Control Setup

5. Betjeningsvejledning

5.1 Stemmekontrol

Once integrated with Alexa or Google Home, you can use simple voice commands to control your lights:

"Alexa, tænd [Lysnavn]."
"Hey Google, sluk [Lysnavn]."
"Alexa, set [Light Name] to blue."
"Hey Google, dæmp [Lysnavn] til 50%."
"Alexa, change [Light Name] to warm white."

5.2 AiDot App Control

The AiDot App provides comprehensive control over your Linkind Smart Light Bulbs:

Til/fra: Toggle lights on or off from anywhere.
Justering af lysstyrke: Smoothly dim or brighten lights from 1% to 100%.
Farveændring: Choose from 16 million colors to create any ambiance.
Afstembar hvid: Adjust white light from warm (1800K) to cool (6500K).
Musiksynkronisering: Sync your lights to the rhythm of your music for dynamic lighting effects. (Requires microphone access for the AiDot App).
Forudindstillede scener: Select from various pre-programmed scenes (e.g., Party, Dynamic, Calm) or create your own custom scenes.
Gruppekontrol: Gruppér flere pærer sammen for at styre dem samtidigt.
Planlægning og timere: Set schedules for lights to turn on/off automatically at specific times.

A living room with smart lights displaying various colors, indicating 16 million colors and tunable white options.

Image: 16 Million Colors & Tunable White

A house with smart lights changing colors in different rooms, illustrating group control and intelligent scheduling.

Image: Group Control and Scheduling

6. Vedligeholdelse

Linkind Smart Light Bulbs are designed for long-lasting performance with minimal maintenance. Follow these guidelines to ensure their longevity:

Rensning: Før rengøring skal du sørge for, at pæren er kold, og at strømmen er slukket. Tør pæren af med en blød, tør klud. Brug ikke flydende rengøringsmidler eller slibende materialer.
Håndtering: Handle bulbs by the base, not the glass or plastic dome, to avoid damage.
Opbevaring: Hvis du opbevarer pærer, skal du opbevare dem et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer.

7. Fejlfinding

If you encounter issues with your Linkind Smart Light Bulbs, refer to the following common problems and solutions:

Problem	Mulig årsag	Løsning
Pæren lyser ikke.	No power; loose connection; faulty bulb.	Check the light switch and circuit breaker. Ensure the bulb is screwed in tightly. Test the bulb in another working fixture.
Kan ikke oprette forbindelse til Wi-Fi.	Forkert Wi-Fi-bånd; svagt signal; forkert adgangskode.	Ensure your Wi-Fi is 2.4GHz (5GHz is not supported). Move the bulb closer to the router. Double-check your Wi-Fi password. Reset the bulb (turn off/on 5 times quickly) and try pairing again.
Flickering or buzzing.	Used with a traditional dimmer switch.	Remove the bulb from any fixture controlled by a traditional dimmer switch. These bulbs are only dimmable via the app or voice control.
Stemmestyring virker ikke.	Not linked to Alexa/Google Home; incorrect device name.	Ensure your AiDot account is correctly linked to your Alexa/Google Home account. Verify the device name in the respective app. Try re-discovering devices in your Alexa/Google Home app.
App control unresponsive.	No internet connection; app glitch.	Check your internet connection. Close and reopen the AiDot App. Restart your phone.

8. Specifikationer

Mærke: Linkind
Modelnavn: LS10012142
Lystype: LED
Pæreform Størrelse: A21
Pære base: E26
Wattage: 14 watt
Glødelampe Tilsvarende Wattage: 100 watt
Lysstyrke: 1600 lumen
Lys farve: Multicolor (RGBTW)
Farvetemperatur: 1800K-6500K
farvegengivelsesindeks (CRI): 90.0
Voltage: 120 volt (Accepteret frekvens: 100 til 120 volt og 60 hertz)
Forbindelse teknologi: Bluetooth, Wi-Fi (2.4GHz ONLY)
Kontrolmetode: App, stemme (Amazon Alexa, Google Assistant)
Indendørs/udendørs brug: Indendørs
Gennemsnitlig levetid: 25000 timer
Materiale: Aluminium, plast
Varens vægt: 15.2 ounce
Pakkedimensioner: 5.75 x 5 x 5 tommer

Diagram showing the dimensions of the Linkind A21 smart light bulb in centimeters and inches.

Billede: Produktmål

9. Garanti og support

9.1 Garantioplysninger

Linkind Smart Light Bulbs come with a 1 års garanti fra købsdatoen. Denne garanti dækker materiale- og fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.

9.2 Kundesupport

For technical assistance, troubleshooting, or warranty inquiries, please contact Linkind Customer Service:

Telefon: 1-877-770-5727
Timer: Monday - Friday, 9 AM - 5 PM PST

	Brugervejledning til Linkind Matter Wi-Fi smarte pærer Omfattende brugervejledning til Linkind Matter Wi-Fi smartpærer, der dækker opsætning med Alexa, Google Home, Apple Home, SmartThings og AiDot-appen. Indeholder funktioner, fejlfinding og ofte stillede spørgsmål.
	Linkind Matter Smart Light Bulb: Guide til opsætning, funktioner og fejlfinding Omfattende guide til Linkind Matter smarte pærer, der dækker opsætning, funktioner, kompatibilitet med Apple Home, Alexa, Google Home og SmartThings, fejlfinding af almindelige problemer og tekniske specifikationer. Indeholder modelnumre og supportoplysninger.
	Linkind Matter Smart Light Bulb RGBTW Brugsanvisning Officiel betjeningsmanual til Linkind Matter Smart Light Bulb RGBTW, med detaljer om opsætning, installation, fejlfinding og ofte stillede spørgsmål om smart home-integration.
	Brugervejledning til Linkind Matter Wi-Fi smarte pærer Omfattende brugervejledning til Linkind Matter Wi-Fi smartpærer, der dækker opsætning, kompatibilitet med Alexa, Google Home, Apple Home og SmartThings, funktioner og fejlfinding.
	Linkind Matter Smart-enheder: Guide til opsætning, fejlfinding og funktioner En omfattende guide til Linkind Wi-Fi smarte pærer og stik, der dækker Matter-integration, opsætning, fejlfinding og ofte stillede spørgsmål. Lær, hvordan du tilslutter, styrer og løser problemer med dine smart home-enheder.
	Brugervejledning til Linkind Matter Smart Devices: Opsætning, Alexa, Google Home, Apple Home, SmartThings-integration Omfattende brugervejledning til Linkind Matter Wi-Fi smart-enheder, inklusive pærer, stik og afbrydere. Lær trin-for-trin opsætning af Alexa, Google Home, Apple Home, SmartThings og AiDot. Inkluderer kompatibilitet, funktioner og fejlfinding.

Linkind LS10012142