1. Introduktion
Thank you for choosing the Einhell FREELEXO Kit 500 Robotic Lawnmower. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new robotic lawnmower and the included grass trimmer. Please read this manual thoroughly before first use and keep it for future reference.
The FREELEXO Kit 500 is part of the powerful Power X-Change family, offering maximum flexibility within the system. It is designed for lawns up to 500 m² and features Bluetooth app control, multi-zone mowing, and advanced safety sensors.
2. Sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre skader og materielle skader:
- Læs alle instruktioner omhyggeligt, før du betjener enheden.
- Hold børn og kæledyr væk fra arbejdsområdet.
- Do not operate the robotic lawnmower in wet conditions or rain. The integrated rain sensor will stop operation automatically.
- Sørg for, at afgrænsningskablet er korrekt installeret for at definere klippeområdet.
- Never lift or carry the robotic lawnmower while the blades are rotating.
- Regularly inspect the blades for wear and replace them as needed.
- Use only original Einhell spare parts and accessories.
- Frakobl batteriet, før du udfører vedligeholdelse eller rengøring.
3. Produktet er slutview
The Einhell FREELEXO Kit 500 includes the robotic lawnmower, a GC-CT 18-24 Li P grass trimmer, a 2.5 Ah Power X-Change battery, a charger, and all necessary installation accessories.


4. Opsætning
4.1. Placering af ladestation
Place the charging station on a flat, level surface in an area with good access to power and away from direct sunlight or excessive moisture. Ensure there is enough clear space around the station for the robotic lawnmower to dock easily.
4.2. Installation af afgrænsningskabel
The boundary wire defines the mowing area for your robotic lawnmower. Lay the wire around the perimeter of your lawn, ensuring it is securely fastened to the ground using the provided fixing hooks. Maintain a minimum distance from obstacles as specified in the detailed installation guide.

4.3. Første opladning
Before first use, fully charge the Power X-Change battery. Insert the battery into the robotic lawnmower, then place the lawnmower into the charging station. The charging indicator will show the battery status.

5. Betjening
5.1. Start og stop
To start the robotic lawnmower, press the 'START' button on the control panel or initiate mowing via the app. To stop, press the 'STOP' button. The lawnmower will automatically return to the charging station when the battery is low or its schedule is complete.

5.2. Bluetooth-app-kontrol
The FREELEXO can be conveniently controlled via a Bluetooth app on your smartphone. Download the Einhell FREELEXO app from your app store. The app allows you to set mowing schedules, define multi-zones, adjust cutting height, and monitor the lawnmower's status.

5.3. Multi-Zone Mowing
For complex or multi-area gardens, the multi-zone mowing feature allows the robotic lawnmower to navigate and mow different sections of your lawn efficiently. Configure these zones within the app based on your boundary wire setup.
5.4. Justering af klippehøjde
The cutting height can be adjusted from 20 mm to 60 mm. Use the adjustment dial on the robotic lawnmower to set your desired grass length.
5.5. Safety Sensors
The robotic lawnmower is equipped with collision, tilt, and lift sensors to ensure safe operation. If an obstacle is detected, the mower will stop and change direction. If lifted or tilted, the blades will immediately stop rotating.


6. Vedligeholdelse
6.1. Udskiftning af kniv
The robotic lawnmower uses three sharp blades for efficient cutting. Regularly check the blades for wear and damage. Replace all three blades simultaneously for balanced cutting. Always wear protective gloves when handling blades.

6.2. Rensning
Keep the robotic lawnmower clean for optimal performance. Use a brush to remove grass clippings from the chassis, wheels, and cutting deck. Do not use a high-pressure washer or immerse the device in water.
6.3. Batteripleje
Store the battery in a cool, dry place when not in use. For long-term storage, ensure the battery is partially charged (around 50%). Avoid fully discharging the battery for extended periods.
7. Fejlfinding
This section addresses common issues you might encounter with your Einhell FREELEXO Kit 500.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Plæneklipperen starter ikke | Battery not charged; STOP button pressed; Boundary wire issue. | Charge battery; Release STOP button; Check boundary wire connection. |
| Ujævnt skæreresultat | Dull or damaged blades; Incorrect cutting height. | Udskift knive; Juster klippehøjden. |
| Lawnmower gets stuck frequently | Obstacles in mowing area; Uneven terrain. | Remove obstacles; Improve terrain if possible; Adjust boundary wire. |
| Cannot connect via Bluetooth app | Bluetooth off; App not updated; Distance too far. | Ensure Bluetooth is on; Update app; Move closer to lawnmower. |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte Einhells kundesupport.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | 3413942 |
| Produktdimensioner | 5.3 x 8.4 x 3.3 cm (packaging); 21.6 Kilograms |
| Driftstilstand | Automatisk |
| Justering af klippehøjde | 20 mm - 60 mm |
| Maks. Hældning | 35 % |
| Batteritype | Power X-Change (2.5 Ah PXC Akku included) |
| Kontrollere | Bluetooth App / Control Panel |
| Sikkerhedssensorer | Collision, Tilt, Lift, Rain |
9. Garanti og support
Einhell products are manufactured with high quality standards. In the unlikely event of a defect, please contact your retailer or Einhell customer service. Keep your proof of purchase for warranty claims.
For further assistance, technical support, or to order spare parts, please visit the official Einhell webwebsted eller kontakt deres kundeserviceafdeling.
- Officiel Einhell Webwebsted: www.einhell.de
- Customer Service Contact: Refer to your regional Einhell webwebstedet for specifikke kontaktoplysninger.





