Produkt overview
This manual provides detailed instructions for the installation, operation, and maintenance of your Puig Touring Screen, model 21795W, designed specifically for the BMW R1300GS motorcycle (2023-2024 models).
The Puig Touring Screen is engineered to enhance rider comfort and protection. Key features include:
- Constructed from high-impact acrylic for durability.
- Designed and tested in a virtual wind tunnel to optimize aerodynamic performance.
- Superior height compared to standard screens, significantly improving wind protection and rider comfort.
Opsætning og installation
Before beginning installation, ensure you have all components as listed in the packaging. All necessary components are included with your Puig Touring Screen. It is recommended to perform installation in a clean, well-lit area.
Nødvendige værktøjer (ikke inkluderet):
- Appropriate Allen keys or Torx wrenches for your motorcycle's existing windshield bolts.
- Phillips head screwdriver (if applicable).
- Torque wrench (recommended for proper fastener tightening).
- Soft cloth to protect surfaces.
Installationstrin:
- Forbered motorcyklen: Park the motorcycle on a stable, level surface. Turn off the engine and remove the ignition key.
- Remove Existing Windshield: Carefully locate and remove the bolts securing the original windshield to the motorcycle's fairing or mounting bracket. Keep these bolts and any spacers or washers organized, as some may be reused.
- Attach Mounting Hardware (if applicable): If your Puig Touring Screen comes with separate mounting brackets, attach them to the motorcycle according to the specific instructions provided in the packaging. Ensure all fasteners are hand-tightened initially.
- Position the Puig Touring Screen: Carefully align the Puig Touring Screen with the mounting points on the motorcycle or the newly installed brackets. Insert the provided bolts (or reused original bolts, as per specific instructions) through the screen and into the mounting points.
- Secure the Screen: Hand-tighten all bolts to ensure proper alignment. Once aligned, progressively tighten all bolts evenly. Refer to your motorcycle's service manual or the Puig instructions for recommended torque specifications. Spænd ikke for meget.
- Endelig kontrol: Gently shake the screen to ensure it is securely mounted and does not wobble. Verify that all fasteners are tight and that the screen does not interfere with steering or other controls.
Betjening og justeringer
The Puig Touring Screen is designed to provide optimal wind protection. Depending on your motorcycle's specific mechanism, your screen may offer adjustable height or angle settings.
Justering af skærmen:
- If your BMW R1300GS has an adjustable windshield mechanism, refer to your motorcycle's owner's manual for instructions on how to safely adjust the screen's height or angle.
- Adjusting the screen to a higher position can significantly reduce wind buffeting and improve comfort, especially at higher speeds, as noted by users.
- Ensure the screen is securely locked in place after any adjustment before riding.
Vedligeholdelse og pleje
Proper care will extend the life and maintain the clarity of your Puig Touring Screen.
Rengøringsvejledning:
- Use only mild soap or a specialized plastic cleaner designed for acrylic surfaces.
- Apply cleaner with a soft, non-abrasive cloth or sponge.
- Skyl grundigt med rent vand.
- Dry with a clean, soft microfiber cloth to prevent water spots.
- Avoid using abrasive cleaners, solvents (like gasoline or paint thinner), or harsh chemicals, as these can damage the acrylic surface.
Inspektion:
- Periodically inspect the screen for cracks, scratches, or signs of wear.
- Check all mounting bolts for tightness. Retighten if necessary, but do not overtighten.
Fejlfinding
If you encounter issues with your Puig Touring Screen, consider the following common solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Excessive Wind Buffeting | Screen height/angle not optimized; rider height/helmet type. | Adjust screen to a higher position if your motorcycle allows. Experiment with different settings. Ensure proper helmet fit. |
| Vibrationer eller raslen | Loose mounting bolts; improper installation. | Check all mounting bolts and ensure they are tightened to specifications. Re-verify installation steps. |
| Reduced Visibility | Dirty screen; scratches. | Clean the screen using recommended methods. For deep scratches, consider professional acrylic repair or replacement. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Puig |
| Modelnavn | Touring skærm |
| Modelnummer | 21795W |
| Kompatibilitet | BMW R1300GS (2023-2024 models, including Option 719 TRAMONTANA, Triple Black, Trophy editions) |
| Materiale | High-Impact Acrylic |
| Varens vægt | 2.78 pund (ca. 1.26 kg) |
| Produktdimensioner | 24.4 x 24.4 x 3.7 tommer (ca. 62 x 62 x 9.4 cm) |
| Funktioner | Wind tunnel tested, improved protection and rider comfort. |
Garanti og support
For warranty information or technical support regarding your Puig Touring Screen, please contact Puig directly through their official webwebstedet eller autoriserede distributører. Behold din købskvittering som købsbevis.
For general inquiries or further assistance, you may visit the Puig official webwebsted.
