1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your Bixolon SRP-330III thermal printer. This model features Serial, Ethernet, and USB connectivity, making it suitable for various point-of-sale and receipt printing applications.
1.1 Pakkens indhold
Ved udpakning skal du kontrollere, at alle dele er til stede:
- Bixolon SRP-330III Thermal Printer
- Brugervejledning (dette dokument)
- Strømkabel
- Interface Cable (may vary based on specific model variant, e.g., USB, Serial, or Ethernet)
2. Sikkerhedsoplysninger
Please read the following safety precautions carefully before using the printer to ensure safe and optimal performance.
- Udsæt ikke printeren for vand eller fugt.
- Use only the power adapter and cables supplied with the printer.
- Sørg for, at printeren er placeret på en stabil, plan overflade.
- Undgå at blokere ventilationsåbninger.
- Forsøg ikke selv at skille printeren ad eller reparere den. Kontakt kvalificeret servicepersonale.
- Opbevares utilgængeligt for børn.
3. Opsætning
3.1 Udpakning og placering
Carefully remove the printer from its packaging. Place the printer in a location with adequate ventilation and away from direct sunlight or heat sources.
Figur 1: Bixolon SRP-330III Thermal Printer. This image shows the black Bixolon SRP-330III thermal printer, viewed from the front-right angle. The printer features a sleek, compact design with a paper output slot at the front and control buttons on the right side of the top panel. The Bixolon logo is visible on the top cover, and an Energy Star label is on the lower left front.
3.2 Tilslutningskabler
Connect the necessary cables to the printer and your host system.
- Strømtilslutning: Connect the power cable to the printer's power port and then to a grounded electrical outlet.
- Interfaceforbindelse:
- USB: Tilslut et USB-kabel fra printerens USB-port til en ledig USB-port på din computer.
- Ethernet: Connect an Ethernet cable from the printer's LAN port to your network router or switch.
- Serie: Connect a Serial cable from the printer's Serial port to the Serial port on your computer or POS system.
3.3 Ilægning af termopapir
The SRP-330III uses thermal paper rolls. Follow these steps to load a new roll:
- Open the printer cover by pushing the cover open lever (typically located on the top right side of the printer).
- Insert the new thermal paper roll into the paper compartment, ensuring the paper feeds from the bottom of the roll towards the front of the printer.
- Træk en lille mængde papir ud forbi skæreenheden.
- Luk printerdækslet godt, indtil det klikker på plads.
4. Betjeningsvejledning
4.1 Tænd/sluk
To power on the printer, ensure the power cable is connected and press the power switch (usually located at the rear or side of the printer). To power off, press the power switch again.
4.2 Grundlæggende udskrivning
Once the printer is connected and drivers are installed on your host system, you can initiate print jobs from your application. The printer will automatically feed and cut the thermal paper.
4.3 Statusindikatorer
The printer features LED indicators on its control panel to display its current status:
- Power LED: Angiver, at printeren er tændt.
- Fejl LED: Illuminates or flashes to indicate an error condition (e.g., paper out, cover open, cutter error).
- Paper Out LED: Indicates that the printer is out of paper or the paper roll is low.
Refer to the troubleshooting section for resolving common error indications.
5. Vedligeholdelse
5.1 Rengøring af printeren
Regular cleaning helps maintain printer performance and extends its lifespan.
- Printhoved: Gently wipe the thermal print head with a soft, lint-free cloth damprenset med isopropylalkohol. Sørg for, at printeren er slukket og afkølet, før den rengøres.
- Valseplade: Clean the platen roller with a soft cloth dampafsluttet med isopropylalkohol.
- Ydre: Tør det ydre afasinmed en blød, tør klud. Brug ikke slibende rengøringsmidler.
Perform cleaning periodically, especially if print quality degrades.
5.2 Paper Roll Replacement
When the paper out indicator illuminates or print quality diminishes due to the end of the roll, replace the paper roll as described in Section 3.3.
6. Fejlfinding
This section addresses common issues you might encounter with your Bixolon SRP-330III printer.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Printeren tænder ikke. | Strømkabel ikke tilsluttet; stikkontakt defekt. | Kontrollér strømkablets forbindelse; prøv en anden stikkontakt. |
| No printing occurs. | Paper out; printer cover open; interface cable loose; driver issue. | Load paper; close cover; check cable connections; reinstall printer drivers. |
| Papirstop. | Improper paper loading; foreign object. | Open cover, carefully remove jammed paper, reload correctly. |
| Dårlig printkvalitet. | Dirty print head; low quality paper; incorrect settings. | Clean print head; use recommended thermal paper; check printer settings. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | SRP-330III |
| Udskrivningsteknologi | Termisk linjeudskrivning |
| Forbindelsesteknologi | Ethernet, USB, Serial |
| Maksimal sort/hvid printopløsning | 203 dpi |
| Max Print Speed Monokrom | 30 ppm |
| Printer output | Monokrom |
| Produktdimensioner | 7.87" D x 9.84" B x 7.87" H (20 x 25 x 20 cm) |
| Varens vægt | 5.46 pund (2.48 kg) |
| Maksimal mediestørrelse | 8.5 x 14 inch (A4 Centimeters) |
| Max input arkkapacitet | 150 |
| Wattage | 50 watt |
| Speciel funktion | Netværksklar |
| Inkluderede komponenter | User manual, power cable, interface cable |
| Varemodelnummer | 8809794035135 |
8. Garantioplysninger
The Bixolon SRP-330III thermal printer comes with a to års producentgaranti against manufacturing defects. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official Bixolon webwebsted eller kontakt kundesupport.
9. Kundesupport
If you encounter issues not covered in this manual or require further assistance, please contact Bixolon customer support. Visit the official Bixolon webwebsted for kontaktoplysninger, driverdownloads og yderligere ressourcer.
Bixolon Official Webwebsted: www.bixolon.com
