Vigtige sikkerhedsoplysninger
Please read this entire manual carefully before assembling, installing, or using your Britax Willow Brook Travel System. Failure to follow these instructions could result in serious injury or death. Keep this manual in a safe place for future reference.
- Always secure your child in the car seat and stroller using the harness system.
- Never leave a child unattended in the car seat or stroller.
- Ensure all locking mechanisms are engaged before placing a child in the stroller or car seat.
- Do not use accessories or replacement parts other than those approved by Britax.
- Refer to your vehicle's owner's manual for specific car seat installation instructions and seating positions.
Produktkomponenter
The Britax Willow Brook Travel System includes the following main components:
- Britax Willow Infant Car Seat
- Britax Aspen babyautostolsbase
- Britax Brook Baby Stroller
Figur 1: Overview of the Britax Willow Brook Travel System, showing the Willow infant car seat, Brook stroller, and Aspen car seat base.
Opsætning og installation
1. Britax Aspen Infant Car Seat Base Installation
The Aspen Infant Car Seat Base features ClickTight technology for secure installation using either the vehicle seat belt or lower connectors (LATCH).
- Placering: Place the Aspen base on the vehicle seat. Ensure it is level using the built-in level indicators. Adjust the spring-assist recline as needed to achieve the correct angle.
- ClickTight Installation (Vehicle Seat Belt):
- Open the ClickTight panel on the base.
- Route the vehicle's lap and shoulder belt through the designated path.
- Spænd sikkerhedsselen.
- Remove all slack from the seat belt.
- Close the ClickTight panel firmly until it clicks.
- LATCH Installation (Lower Connectors):
- Locate the lower anchor connectors on the base.
- Attach the quick-push lower connectors to your vehicle's lower anchors. Ensure they click into place.
- Tighten the LATCH strap to remove all slack.
- Store unused lower connectors within the base.
- Tjek for sikkerhed: After installation, firmly pull on the base at the belt path. It should not move more than one inch side-to-side or front-to-back.
Figur 2: The Britax Aspen Infant Car Seat Base, showing the ClickTight installation area and level indicators.
Figur 3: The underside of the Aspen base, illustrating the storage location for lower connectors when not in use.
2. Britax Willow Infant Car Seat Adjustment
The Willow car seat features the RightSize system for proper fit from 4 to 30 lbs.
- Adjust the harness straps to be at or just below your child's shoulders when rear-facing.
- Ensure the crotch buckle is positioned correctly to prevent slouching.
- Tighten the harness until it is snug against your child's body, with no slack. You should not be able to pinch any excess webbing ved skulderen.
3. Britax Brook Stroller Assembly
Refer to the separate assembly guide included with your Brook Stroller for detailed instructions on attaching wheels, canopy, and other components.
Betjeningsvejledning
1. Attaching the Willow Car Seat to the Brook Stroller
- Ensure the Brook stroller is fully unfolded and locked in the open position.
- Align the Willow car seat with the stroller's car seat adapters.
- Lower the car seat onto the adapters until it clicks securely into place.
- Gently pull up on the car seat to confirm it is properly attached before use.
Figur 4: The Britax Willow infant car seat securely attached to the Brook stroller frame, ready for travel.
2. Stroller Modes (4 Ways to Stroll)
The Brook stroller offers four versatile ways to stroll, accommodating both infant car seats and reversible toddler seats.
- Infant Car Seat Facing Parent: Willow car seat attached to stroller, facing the parent.
- Infant Car Seat Facing Forward: Willow car seat attached to stroller, facing forward.
- Toddler Seat Facing Parent: Stroller seat installed, facing the parent.
- Toddler Seat Facing Forward: Stroller seat installed, facing forward.
Figur 5: Visual representation of the four strolling configurations available with the Britax Brook stroller, demonstrating its versatility.
3. One-Step Stroller Fold
To fold the Brook stroller:
- Ensure the stroller seat is in the forward-facing position (if attached).
- Locate the one-step fold mechanism (refer to your stroller's specific instructions for exact location).
- Activate the mechanism and push down/forward to collapse the stroller.
- Ensure the stroller locks into its folded position.
Vedligeholdelse og pleje
- Rengøring af stof: Spot clean fabric components with mild soap and cold water. Air dry. Do not use bleach.
- Rengøringsramme: Wipe the stroller frame and car seat shell with a damp klæde.
- Hjul: Periodically check wheels for debris and ensure they rotate freely. Lubricate axles if necessary.
- Seletøj: Inspect harness straps regularly for wear or damage. Replace if necessary.
- Opbevaring: Store the travel system in a dry, cool place away from direct sunlight.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Car seat not clicking into base/stroller | Misalignment; obstruction; locking mechanism not fully engaged. | Ensure proper alignment. Check for debris. Apply firm, even pressure until a click is heard. |
| Stroller difficult to fold/unfold | Locking mechanism engaged; seat not in correct position; obstruction. | Ensure all locks are disengaged. Position seat correctly (usually forward-facing). Check for obstructions. |
| Harness straps difficult to adjust | Strap twisted; buckle jammed; child's clothing interfering. | Untwist straps. Clear any obstructions from buckle. Ensure child's clothing is not too bulky. |
Specifikationer
- Mærke: Britax
- Model: Willow Brook Travel System
- Farve: Navy Glacier
- Alders-/vægtinterval for autostol: Rear-facing, 4 to 30 lbs
- Stroller Weight Capacity: Op til 50 lbs
- Seletype: 5-point
- Installation Type (Base): LATCH or Vehicle Seat Belt (ClickTight)
- Inkluderede komponenter: Britax Willow car seat, Aspen base, Brook baby stroller
- Yderligere funktioner: ClickTight Technology, Reversible Seats, Four Ways to Stroll, One-step Fold, Water-resistant canopy, Parent cup holder, Child snack tray.
Garanti og support
For warranty information, product registration, or customer support, please visit the official Britax webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købsbevis til garantikrav.
Britax Officiel Webwebsted: us.britax.com
