Pymeter Reptile Varmepude med PID-termostat og timer (model PY-RHP812) Brugsanvisning

1. Introduktion

This manual provides detailed instructions for the safe and effective use of your Pymeter Reptile Heating Pad with PID Thermostat & Timer. This device is designed to maintain a stable temperature in reptile terrariums, promoting the health and well-being of your pets. It features an integrated PID thermostat for precise temperature control and an adjustable timer function.

Figure 1: Pymeter Reptile Heating Pad with integrated thermostat and timer control unit.

2. Vigtige sikkerhedsadvarsler

• Do not submerge the heat pad or control unit in water. This product is waterproof but not designed for immersion.
• Keep the heat pad away from water and flammable materials.
• Do not rest the terrarium tank directly on the power cord or plastic housing of the control unit.
• Always disconnect power and allow the heat pad to cool completely before folding or stacking it.
• Ensure the temperature probe is securely fixed at the desired monitoring location within the terrarium to prevent inaccurate readings and potential overheating or underheating.
• This product is intended for use with terrariums and similar enclosures. Do not use for purposes other than its intended design.

3. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• Pymeter Reptile Heating Pad (8"x12")
• Integrated PID Thermostat and Timer Control Unit
• Temperatursonde
• Nano Traceless Strong Adhesive Tape
• Instruktionsmanual (dette dokument)

4. Produktspecifikationer

Figure 2: Detailed specifications and dimensions of the heating pad and control unit.

5. Opsætning og installation

Follow these steps to properly install your Pymeter Reptile Heating Pad:

1. Forbered overfladen: Ensure the terrarium surface where the heat pad will be applied is clean, dry, and free of dust or debris.
2. Apply Adhesive Tape: Use the provided nano traceless strong adhesive tape to secure the heat pad to the desired location on the terrarium. The pad can be mounted on the sides or bottom of the tank. This adhesive allows for removal and reuse without leaving residue.
3. Position the Heat Pad: Place the heat pad on the exterior surface of the terrarium. For optimal heat distribution, ensure it is positioned where your reptile will benefit most from the warmth.
4. Install the Temperature Probe: Fix the temperature probe securely at the hot spot within the terrarium where you need to monitor or maintain the temperature. This is crucial for accurate temperature regulation. Avoid placing the probe directly on the heat pad's surface inside the tank, as this may lead to inaccurate readings.
5. Tilslut strøm: Plug the heat pad's power cord into a standard 120V power outlet.

Figur 3: Eksample of heat pad installation on a terrarium side and probe placement.

Figure 4: The removable and reusable adhesive tape for secure mounting.

6. Betjeningsvejledning

The Pymeter Reptile Heating Pad features an integrated PID thermostat and timer for precise control.

6.1. Indstilling af temperaturen

1. Tryk på TEMP button once to enter temperature setting mode. The current set temperature will flash on the display.
2. Brug UP og NED arrow buttons to adjust the desired temperature. The control range is 40°F to 131°F.
3. After setting, the device will automatically save the setting and exit the setting mode if no operation occurs within 2 seconds.

Figure 5: Thermostat control unit with temperature setting interface.

The PID control system ensures that the temperature is maintained within ±1°F of your set point, preventing large temperature swings and optimizing energy consumption by adjusting power output as needed.

Figure 6: PID control ensures stable temperature and energy efficiency.

6.2. Using the Timer Function

The default timer mode is always "ON". To select a timed operation:

• Tryk på TID button to cycle through available timer settings: ON, 2 hours, 4 hours, 8 hours, 12 hours.
• Select the desired duration for the heat pad to operate. After the selected time, the heat pad will turn off.

7. Vedligeholdelse og pleje

• Rensning: The heat mat is made from premium PVC material, making it simple to clean. Wipe the surface with a damp cloth. Ensure the unit is unplugged and completely cool before cleaning. Do not use abrasive cleaners or immerse the unit in water.
• Opbevaring: When not in use, disconnect the power and allow the heat pad to cool. Store it flat or gently rolled to avoid damage to the internal heating elements. Avoid sharp folds.
• Selvklæbende tape: The nano traceless adhesive tape is reusable. If it loses stickiness, clean the surface of the tape and the terrarium.

Figure 7: The heat pad features a waterproof surface for easy cleaning.

8. Fejlfinding

9. Garanti og support

This Pymeter Reptile Heating Pad comes with a 2 års producentgaranti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For warranty claims, technical support, or any questions regarding your product, please contact Pymeter customer service. Please have your model number (PY-RHP812) and purchase information ready when contacting support.

Fabrikant: PYMETER