Vigtige sikkerhedsoplysninger
Læs og forstå alle instruktioner, før du påbegynder installationen. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer, der kan forårsage personskade eller materielle skader.
- Afbryd strømmen: Sluk altid for strømmen ved afbryderen, før du installerer, servicerer eller fjerner armaturet.
- Uddannet elektriker: Installation should be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
- Jording: Sørg for, at armaturet er korrekt jordforbundet for at undgå potentielt elektrisk stød.
- Damp Placering bedømt: Denne armatur er egnet til damp locations, such as bathrooms and showers, but not for direct water exposure.
- Kompatibilitet: Use only with 120 VAC power supply. Do not attempt to modify the fixture.
- Varme: LED fixtures generate heat. Allow adequate ventilation around the fixture.
Produkt overview
The Maxxima MRL-61505 is a 5-inch and 6-inch retrofit recessed anti-glare LED downlight designed for easy installation into existing recessed can housings. It offers 1300 lumens of illumination and features 5 selectable color temperatures, ranging from warm white to daylight, to suit various lighting preferences. The fixture is dimmable and includes an E-26 quick connect adapter for convenient setup.
Nøglefunktioner:
- Energieffektiv: 15W LED equivalent to 100W incandescent light, reducing energy consumption.
- Høj lysstyrke: Provides 1300 lumens with an anti-glare design.
- 5 CCT Selectable: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using a switch on the fixture.
- Dæmpbar: Compatible with most standard LED dimmers, offering a dimming range of 10% to 100%.
- Højt farvegengivelsesindeks (CRI): 90 CRI ensures accurate color appearance.
- Holdbar konstruktion: Made with a cast aluminum body for lightweight and robust performance.
- Anti-refleksdesign: Smooth baffle deep recessed trim minimizes glare.
Figur 1: Forside view of the Maxxima Retrofit Recessed LED Downlight, showing the anti-glare design and E-26 adapter.
Figur 2: Vinklet view of the downlight, illustrating the mounting springs for installation into a recessed can.
Video 1: En overview of the Maxxima Retrofit Anti-Glare LED Downlight, demonstrating its features and selectable color temperatures.
Opsætning og installation
Follow these steps to properly install your Maxxima LED Downlight:
- Sluk for strømmen: Before starting, ensure the power to the existing recessed can fixture is turned off at the circuit breaker.
- Remove Existing Trim: Carefully remove the existing bulb and trim from the recessed can.
- Connect E-26 Adapter: Connect the E-26 quick connect adapter (provided) to the fixture's wiring. Then, screw the E-26 adapter into the existing socket of the recessed can.
- Vælg farvetemperatur (CCT): Locate the CCT selection switch on the back of the downlight. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.
- Installer downlight: Gently push the wiring and the E-26 adapter into the recessed can. Compress the spring clips on the sides of the downlight and insert the fixture into the can. Release the clips to secure the downlight flush against the ceiling.
- Gendan strøm: Once the downlight is securely installed, restore power at the circuit breaker.
Figure 3: Illustration of connecting the E-26 quick connect adapter to the downlight's wiring.
Figur 4: Bagside view of the downlight, highlighting the CCT selection switch.
Figur 5: Detaljeret view of the CCT switch, showing the five color temperature options.
Installationstips:
- Fjederspænding: If the light does not stay flush, ensure the spring clips are properly engaged with the torsion clips inside the recessed can. Some older cans may require adjustment or the use of compatible mounting clips.
- Wire Clearance: Verify that internal wires within the can are not obstructing the downlight, which could prevent it from seating properly.
Betjeningsvejledning
The Maxxima LED Downlight is designed for simple operation once installed.
Valg af farvetemperatur:
The color temperature is set using the switch on the back of the fixture during installation. To change the CCT after installation, you must carefully remove the fixture from the recessed can, adjust the switch, and then reinstall it. The available color temperatures are:
- 2700K: Blød hvid
- 3000K: Varm hvid
- 3500K: Lyse hvid
- 4000K: Neutral White
- 5000K: Dagslys
Figure 6: Visual guide to the five selectable color temperatures provided by the downlight.
Dæmpningsfunktion:
This downlight is dimmable from 10% to 100% with compatible LED dimmers. Ensure your dimmer switch is rated for LED lighting to achieve optimal performance and avoid flickering or damage.
Opretholdelse
Maxxima LED Downlight kræver minimal vedligeholdelse.
- Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Brug en blød, tør eller let fugtet klud.amp klud. Undgå slibende rengøringsmidler, opløsningsmidler eller barske kemikalier, da disse kan beskadige overfladen eller de elektriske komponenter.
- Ingen pæreudskiftning: This fixture features an integrated LED, meaning no bulb replacement is necessary throughout its lifespan.
Fejlfinding
If you encounter issues with your downlight, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power, loose connection, faulty fixture. | Check circuit breaker. Verify E-26 adapter is securely screwed in and connections are tight. If problem persists, contact customer support. |
| Lyset flimrer eller dæmpes forkert. | Incompatible dimmer, loose wiring. | Ensure dimmer is LED compatible. Check all electrical connections. |
| Light does not sit flush with the ceiling. | Spring clips not engaged, internal obstruction, insufficient spring tension. | Ensure spring clips are fully engaged with the can's torsion clips. Check for wires or insulation obstructing the fixture. Adjust spring tension if necessary by gently bending the springs closer together at the top. |
| Forkert farvetemperatur. | CCT-kontakten er indstillet forkert. | Remove fixture, adjust CCT switch to desired setting, and reinstall. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | MRL-61505 |
| Mærke | Maxxima |
| Produktdimensioner | 7.1 cm L x 7.1 cm B x 4.5 cm H |
| Wattage | 15 watt |
| Lysstyrke | 1300 lumen |
| Farvetemperatur | 2700K/3000K/3500K/4000K/5000K Selectable |
| CRI | 90 |
| Voltage | 120 volt (AC) |
| Dæmpbar | Ja (10% - 100%) |
| Strålevinkel | 36° |
| Materiale | Aluminium |
| Installationstype | Flush Mount (Retrofit for 5" & 6" cans) |
| Pære base | E26 Quick Connect Adapter |
| Livstidstimer | 50,000 timer |
| Certificeringer | ETL Listed, T20 California Compliant |
| Varens vægt | 1.5 pund |
| Indendørs/Udendørs brug | Indendørs (Damp Bedømt) |
Garantioplysninger
The Maxxima MRL-61505 LED Downlight comes with a 3 års garanti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. For garantikrav eller yderligere oplysninger, kontakt venligst Maxximas kundesupport.
Kundesupport
For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer support. Refer to the product packaging or the official Maxxima webhjemmeside for de seneste kontaktoplysninger.
