TELESIN Styrmonteringsvejledning

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your TELESIN Handlebar Mount. This versatile mount is designed to securely attach action cameras and smartphones to various tubular structures, such as bicycle handlebars, motorcycle rearview mirrors, and other poles, enabling stable recording of your activities.

Figur 1.1: TELESIN Handlebar Mount. This image displays the complete handlebar mount assembly, including the clamp, ball head, and camera adapters.

2. Pakkens indhold

Kontroller venligst, at alle nedenstående varer er til stede i din pakke:

• 1x Handlebar Tube Mount
• 1x Adapter for GoPro (Two-leg Adapter)
• 1x Adapter for Insta360 (1/4" Thread Screw Adapter)
• 1x Locking Screw
• 1x Rearview Mirror Soft Cushion (Silicone Gasket)

3. Sikkerhedsoplysninger

To ensure safe operation and prevent damage to your equipment or injury, please observe the following:

• Ensure the mount is securely fastened to the desired surface before attaching any camera or device.
• Regularly check the tightness of all screws and connections, especially after prolonged use or exposure to vibrations.
• Spænd ikke skruerne for hårdt, da dette kan beskadige beslaget eller monteringsfladen.
• Avoid mounting in locations where it obstructs your view or interferes with the safe operation of your vehicle.
• This mount is designed for action cameras and lightweight devices. Do not exceed the recommended weight capacity.

4. Installationsvejledning

Follow these steps to properly install your TELESIN Handlebar Mount:

1. Determine Clamping Diameter:

   Identify the diameter of the tube or bar where you intend to mount the device. The mount supports a clamping range of 22-38mm. For smaller diameters (9-15mm), use the included silicone gasket (rearview mirror soft cushion) inside the clamp kæber.

   

   Figur 4.1: Clamping Diameter Options. This image illustrates how the mount adapts to different tube diameters, showing both small (9-16mm with cushion) and large (22-38mm without cushion) diameter clamping.

2. Fastgør Clamp:

   Åbn clamp by unscrewing the locking knob. Position the clamp around the desired tube. If necessary, insert the silicone gasket for a snug fit on smaller tubes. Tighten the locking knob until the clamp is firmly secured and does not move.

   

   Figur 4.2: Installation Steps. This image provides a visual guide for the installation process, including checking diameter, securing the clamp, attaching the adapter, and adjusting the ball head.
3. Attach Camera Adapter:

   Select the appropriate adapter for your camera:

   • For GoPro and similar action cameras, use the three-prong adapter.
   • For Insta360 cameras or smartphones (with a separate phone holder, not included), use the 1/4" thread screw adapter.

   Attach the chosen adapter to the ball head of the mount and secure it with the provided locking screw.

   

   Figur 4.3: Camera Adapter Options. This image shows the two types of adapters included: a three-prong adapter for sports cameras and a 1/4" screw adapter for Insta360 and smartphones (with a phone holder).

4. Monter din enhed:

   Attach your action camera or phone holder (with phone) to the installed adapter. Ensure it is securely fastened.

5. Betjeningsvejledning

The TELESIN Handlebar Mount features a 360° rotating ball head for flexible camera positioning.

1. Justering af kameravinkel:

   Loosen the knob on the ball head to allow for rotation and tilting. Adjust your camera to the desired angle and perspective. Once the desired position is achieved, tighten the knob firmly to lock the ball head in place.

   

   Figur 5.1: 360° Ball Mount. This image demonstrates the 360-degree rotation capability of the ball head, allowing for precise angle adjustments.
2. Sikring af stabilitet:

   Always ensure the ball head knob is fully tightened to prevent unwanted movement or vibration during recording, especially in dynamic environments like cycling or motorcycling.

6. Vedligeholdelse

Proper maintenance will extend the lifespan of your TELESIN Handlebar Mount:

• Rensning: Tør holderen af ​​med en blød kludamp klud til at fjerne støv og snavs. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
• Inspektion: Periodically inspect the mount for any signs of wear, damage, or loose components. Pay attention to the clamping mechanism and the ball head.
• Opbevaring: Store the mount in a clean, dry place when not in use.
• Korrosionsbestandighed: The mount features corrosion-resistant stainless steel components for durability.

Figur 6.1: Quality Details. This image highlights key features such as the soft cushion for rearview mirror mounting and corrosion-resistant stainless steel components.

7. Fejlfinding

If you encounter issues with your TELESIN Handlebar Mount, refer to the following common problems and solutions:

8. Specifikationer

9. Garanti og support

TELESIN provides a warranty for its products. If you encounter any issues or are dissatisfied with your TELESIN product for any reason, please contact our online customer support for assistance.

We are committed to resolving your problems quickly and efficiently and take full responsibility for the quality of our products.

For customer support, please refer to the contact information provided on the TELESIN official webwebstedet eller din købsdokumentation.