Brugermanual til Resiners Dual-Head Resin Mixer

1. Introduktion

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Resiners Dual-Head Resin Mixer (Model R-072E). Designed for efficiency and ease of use, this electric stirrer is ideal for mixing resin, silicone, paint, and other craft materials with minimal bubbles. Please read this manual carefully before use to ensure proper and safe operation.

Figure 1: Resiners Dual-Head Resin Mixer Overview

2. Hvad er der i æsken

Upon opening your Resiners Dual-Head Resin Mixer package, you should find the following components:

• Dual-Head Electric Mixer Unit
• 4 x Silicone Paddles (2 long, 2 short)
• 1 x Silicone Mat
• 1 x Type-C ladekabel
• 1 x brugermanual
• Screws and Mini Screwdriver (for assembly)

Figur 2: Pakkens indhold

3. Opsætningsvejledning

Follow these steps to assemble your Resiners Dual-Head Resin Mixer:

1. Attach the Main Unit to the Base: Insert the two aluminum support tubes from the main mixer unit into the corresponding holes on the base. Ensure they are securely seated.
2. Fastgør basen: Flip the unit over and use the provided screws and screwdriver to fasten the main unit to the base from underneath.
3. Insert Silicone Paddles: Attach the desired long or short spiral silicone paddles to the mixing shafts by aligning and pushing them firmly into place.
4. Place Silicone Mat: Position the silicone mat onto the base, aligning it with the mixing areas. This mat helps keep your workspace clean and provides stability for mixing cups.

Opsætning af videoguide

Video 1: Installation Manual of Dual-Head Resin Mixer. This video demonstrates the assembly process and initial operation of the mixer.

4. Betjeningsvejledning

The Resiners Dual-Head Resin Mixer is designed for efficient and hands-free mixing:

• Håndfri betjening: Simply place your mixing cups on the designated spots on the silicone mat. Rotate the control knobs to start automatic stirring, freeing your hands and preventing wrist strain.
• Trinløs hastighedskontrol: Each mixing head features independent stepless speed control, allowing you to adjust the rotation from 0 to 300 RPM. This enables precise mixing for various resin capacities and viscosities, ensuring minimal bubbles and uniform results.
• Powerful Dual Motors: Equipped with two independent motors, the mixer provides strong torque (up to 800g.cm) to handle even highly viscous resins without losing power.
• Trådløs brug: The built-in 2600mAh large-capacity battery allows for up to 4 hours of continuous wireless operation after a full charge. The LED indicator lights will flash during charging and remain solid when fully charged.

Figure 3: Hands-Free Mixing

Figure 4: Dual Motors & Stepless Speed

Figure 5: Wireless Operation

Figure 6: Minimal Bubbles Mixing

5. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your mixer:

• Cleaning Paddles: After each use, simply wipe the silicone mixing paddles with a damp cloth to clean off any liquid resin. For hardened resin, the silicone material allows you to easily peel off large pieces. Remove any residual fragments with resin tape if necessary.
• Rengøringsbase: The silicone mat on the base can be easily wiped clean with a damp klæde.
• Adding Additives: If adding ink, dye, or mica powder, always drop them in the center of the resin cup to ensure even distribution during mixing.

Figure 7: Easy Cleaning of Silicone Paddles

6. Fejlfinding

If you encounter any problems during the use of your Resiners Dual-Head Resin Mixer, please refer to the following general advice:

• Enheden tænder ikke: Ensure the unit is fully charged using the provided Type-C cable. Check the LED indicator lights for battery status.
• Paddles Not Rotating: Verify that the paddles are correctly inserted and securely attached to the mixing shafts. Ensure the speed control knobs are rotated past the 'off' position.
• Excessive Bubbles: Adjust the mixing speed to a lower RPM. Slower mixing speeds generally produce fewer bubbles. Ensure resin components are at room temperature.
• Uneven Mixing: Ensure the mixing cups are centered on the silicone mat. For best results, follow recommended mixing times for your specific resin type.

For any persistent issues or further assistance, please contact Resiners customer support. We are committed to providing satisfactory solutions.

7. Specifikationer

Figur 8: Produktmål

8. Garanti og support

Resiners is dedicated to providing high-quality products and excellent customer experience. Your Dual-Head Resin Mixer comes with a 100% kvalitetsgaranti.

If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact our customer support team. We offer 24-timers eftersalgsservice for at sikre din tilfredshed.

For contact information, please refer to the packaging or the official Resiners webwebsted.