Genmitsu 3018-PROVer V2 Desktop CNC-routermaskine Brugermanual

1. Produktet er slutview

The Genmitsu 3018-PROVer V2 is an upgraded desktop CNC router machine designed for precision carving, engraving, and milling. It features GRBL v1.1 open-source control, enhanced Toshiba TB6S109 drivers with 32-bit chips, and expanded functionality ports. This machine is ideal for hobbyists, educators, and small businesses looking to perform detailed work on various materials.

Nøglefunktioner omfatter:

• Upgraded Control System: Based on open-source Grbl v1.1 with more powerful and silent Toshiba TB6S109 drivers.
• Extended Functionality: Includes 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port for versatile applications.
• Nem montering: Pre-assembled accessories allow for setup in less than 20 minutes.
• Durable Spoilboard: Comes with a one-piece machined and molded aluminum spoilboard ensuring flatness and strength.
• 3040 Extension Compatibility: Seamlessly integrates with the 3018PROVer-V2 Y-Axis Extension Kit to expand the work area from 3018 to 3040.
• Innovative Joint Design: Utilizes a 4mm sheet metal connector for the spoilboard, maintaining Y-axis travel.

2. Sikkerhedsoplysninger

Operating a CNC machine requires adherence to safety protocols to prevent injury and damage. Always read and understand all instructions before operation.

• Øjenbeskyttelse: Brug altid sikkerhedsbriller eller beskyttelsesbriller for at beskytte dine øjne mod flyvende genstande.
• Høreværn: Use hearing protection, especially during prolonged operation, as the machine can generate noise.
• Støvmaske: Wear a dust mask to avoid inhaling fine particles generated during carving.
• Sikkert arbejdsemne: Sørg for, at emnet er fastspændtamped to the spoilboard to prevent movement during operation.
• Ryd arbejdsområde: Keep the work area clear of clutter, tools, and flammable materials.
• Nødstop: Gør dig bekendt med placeringen og funktionen af ​​nødstopknappen.
• Tag stikket ud, når det ikke er i brug: Disconnect power before performing any maintenance, adjustments, or when the machine is not in use.
• Overvågning: Efterlad aldrig maskinen uden opsyn under drift.
• Ventilation: Ensure adequate ventilation to disperse dust and fumes.

3. Opsætning og montering

The Genmitsu 3018-PROVer V2 is designed for quick and easy assembly, with many components pre-assembled. Follow the included assembly guide for detailed step-by-step instructions.

3.1 Udpakning og inspektion

Carefully unpack all components and verify against the packing list. Inspect for any shipping damage. Report any discrepancies or damage to Genmitsu support immediately.

3.2 Basic Assembly Steps

Assembly typically involves attaching the gantry to the base, installing the spindle, and connecting the wiring. The upgraded design minimizes complex steps.

3.3 Elektriske forbindelser

Connect the stepper motors, limit switches, and spindle to the control board. Ensure all connections are secure before powering on the machine.

4. Betjeningsvejledning

The 3018-PROVer V2 operates using the GRBL v1.1 firmware and can be controlled via its offline controller or a connected computer.

4.1 Offline-kontrol

The included offline controller allows for direct control of the machine without a computer. It can load G-code files from an SD card, jog the axes, set home positions, and start/pause/stop jobs.

4.2 Software Control (GRBL)

For advanced control and design, connect the machine to a computer running compatible GRBL control software (e.g., Candle, UGS). This allows for real-time monitoring, G-code sending, and more complex operations.

4.3 Spindeldrift

The spindle speed can be adjusted manually or via G-code commands. Ensure the correct collet and bit are installed and tightened before operation.

4.4 Using Extended Ports

• Laser Port: Connect a compatible laser module for engraving and cutting applications.
• Air Assistance Pump Port: Connect an air pump for improved chip evacuation during milling.
• MPG Port: Connect a Manual Pulse Generator for precise manual control of axis movement.

4.5 firmwareopdateringer

The 3018-PROVer V2 supports firmware updates via an SD card, allowing for future enhancements and bug fixes. Refer to the Genmitsu webwebsted for den nyeste firmware og opdateringsinstruktioner.

5. Spoilboard and Extension

The machine comes with a robust aluminum spoilboard and is compatible with a 3040 extension for larger projects.

5.1 Original Aluminum Spoilboard

The one-piece machined and molded aluminum spoilboard provides a flat and stable work surface. It is designed with a grid of threaded holes for easy clampning af arbejdsemner.

5.2 3040 Extension Compatibility

The 3018-PROVer V2 is designed to work seamlessly with the 3018PROVer-V2 Y-Axis Extension Kit, allowing you to expand your work area from 3018 to 3040. This extension uses a new 4mm sheet metal connector design to attach the aluminum spoilboard to the polishing bar, ensuring the Y-axis travel area remains constant.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your Genmitsu 3018-PROVer V2.

• Rensning: Regularly clean dust and debris from the lead screws, linear rails, and gantry using a brush or compressed air. Avoid using solvents that may damage plastic components.
• Smøring: Apply a thin layer of light machine oil or grease to the lead screws and linear rails periodically to ensure smooth movement.
• Stram fastgørelsesanordninger: Periodically check and tighten all screws and bolts to ensure structural integrity.
• Spindelpleje: Keep the spindle clean and free of dust. If the spindle motor becomes excessively hot or noisy, discontinue use and contact support.
• Vedligeholdelse af spændetang: Clean collets regularly to ensure proper grip on bits. Replace worn collets to prevent bit slippage.

7. Fejlfinding

Dette afsnit indeholder løsninger på almindelige problemer, du kan støde på.

7.1 Machine Not Powering On

• Check power cable connection to the machine and wall outlet.
• Ensure the power switch on the control board is in the 'ON' position.
• Kontroller, at strømadapteren fungerer korrekt.

7.2 Motors Not Moving / Skipping Steps

• Check all motor cable connections to the control board.
• Ensure lead screws and linear rails are clean and lubricated.
• Verify that the current settings for the stepper drivers are appropriate (if adjustable).
• Tjek for eventuelle fysiske forhindringer, der forhindrer bevægelse.

7.3 Spindle Not Rotating

• Check spindle motor connection to the control board.
• Ensure the spindle is enabled in your control software or offline controller.
• Bekræft strømforsyningen voltage is sufficient for the spindle.

7.4 G-code Errors

• Ensure your G-code is compatible with GRBL v1.1.
• Check for syntax errors in the G-code file.
• Verify that the machine's work area and limits are correctly set.

For further troubleshooting or issues not listed here, please contact Genmitsu customer support.

8. Specifikationer

Detailed specifications for the Genmitsu 3018-PROVer V2 CNC Router Machine:

9. Garanti og support

For warranty information, technical support, or assistance with your Genmitsu 3018-PROVer V2 CNC Router Machine, please refer to the official Genmitsu webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til garantikrav.

Genmitsu officielle Webwebsted: Besøg Genmitsu-butikken på Amazon