Nautica Men's NST Chronograph 46mm Watch User Manual

Indledning

This manual provides essential instructions for the setup, operation, and maintenance of your Nautica Men's NST Chronograph 46mm Watch. Please read this manual thoroughly to ensure proper use and longevity of your timepiece.

Image 1: Nautica Men's NST Chronograph 46mm Watch

Opsætning

1. Unboxing: Carefully remove the watch and any accessories from the packaging. Inspect for any visible damage.
2. Remjustering: The watch features an adjustable silicone strap. To adjust, locate the buckle and slide the pin through the desired hole for a comfortable fit on your wrist. The strap is 22x20mm and fits up to an 8-inch wrist circumference.
3. Indstilling af tid:
   • Skru kronen af ​​(hvis relevant), og træk den ud til den anden klikposition.
   • Drej kronen for at indstille time- og minutviserne til det korrekte klokkeslæt.
   • Skub kronen tilbage på plads, og skru den godt fast for at sikre vandtæthed.
4. Indstilling af dato:
   • Unscrew the crown (if applicable) and pull it out to the first click position.
   • Rotate the crown to adjust the date display, located at the 4 o'clock position, to the correct date.
   • Push the crown back in and screw it down securely. Avoid setting the date between 9 PM and 3 AM to prevent damage to the movement.

Image 2: Watch and accessories in case

Betjening af kronografen

Your Nautica NST Chronograph watch features a stopwatch function for measuring elapsed time.

1. Start af kronografen: Press the upper pusher button to start the chronograph. The chronograph second hand will begin to move.
2. Stop af kronografen: Press the upper pusher button again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
3. Nulstilling af kronografen: After stopping, press the lower pusher button to reset all chronograph hands to their zero positions.
4. Split Time Function (if applicable): Refer to the detailed movement instructions provided with your watch for advanced chronograph functions like split time measurement.

Image 3: Watch with interchangeable strap

Opretholdelse

• Rensning: Tør urkassen og remmen regelmæssigt af med en blød, tør klud. Til silikoneremme kan en mild sæbeopløsning og vand anvendes, efterfulgt af grundig skylning og tørring.
• Vandtæthed: This watch is water-resistant to 100 meters (330 feet). This rating is suitable for swimming and snorkeling. Do not operate the crown or pushers while the watch is wet or submerged. Avoid exposing the watch to hot water, steam, or extreme temperature changes, as this can compromise the water seals. Ensure the screw-down crown is always securely tightened.
• Udskiftning af batteri: When the watch stops running, it indicates the battery needs replacement. Battery replacement should be performed by a qualified watch technician to maintain water resistance and ensure proper function.
• Opbevaring: Når det ikke er i brug, skal du opbevare dit ur et køligt og tørt sted væk fra direkte sollys og stærke magnetfelter.

Fejlfinding

• Uret kører ikke: Kontroller om kronen er trykket ind og skruet fast. Hvis uret stadig ikke går, skal batteriet muligvis udskiftes.
• Kronografviserne nulstilles ikke: This may require a chronograph hand alignment procedure. Consult a professional watch repair service.
• Dato ændres ikke: Ensure the time is set correctly, passing through 12 AM for the date change. If the issue persists, the date mechanism may require inspection.
• Kondensation inde i krystal: If condensation appears under the crystal, it indicates a loss of water resistance. Immediately take the watch to a professional for inspection and repair to prevent further damage.

Specifikationer

Garanti og support

For detailed warranty information, product support, or service inquiries, please visit the official Nautica webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købsbevis til garantikrav.

Producent: Timex

Brand: Nautica

For further assistance, refer to the official Nautica support channels.