DEPSTECH DS560TL Triple Lens Borescope User Manual

1. Introduktion

This manual provides detailed instructions for the safe and effective use of your DEPSTECH DS560TL Triple Lens Borescope. This device is designed for visual inspection in hard-to-reach areas, featuring a 5-inch IPS display, 1080P HD resolution, and a 16.5ft semi-rigid cable with IP67 waterproof rating. Please read this manual thoroughly before operation.

2. Produktet er slutview

2.1 Hvad er der i æsken

• Video Borescope Unit
• 16.5ft Semi-Rigid Cable
• Sturdy Carrying Case
• Accessory Kit (Kickstand, USB Charging Cable, Hook and Magnet)
• Brugermanual

Figur 1: Included components of the DEPSTECH DS560TL borescope kit, showing the main unit, probe cable, carrying case, and accessories.

2.2 Nøglefunktioner

• Triple Lens Camera System: Features three 1080P HD cameras for comprehensive viewing, allowing seamless toggling between front and side views, or simultaneous dual-view vise.
• 5-tommer IPS-skærm: Provides a clear and detailed view of inspection areas with high resolution.
• Bluart 3.0-teknologi: Enhances image clarity, color accuracy, and low-light performance with adjustable camera lights.
• 16.5ft Semi-Rigid Cable: Offers a balance of flexibility and stiffness for navigating tight spaces and maintaining probe position.
• IP67 Vandtæt Probe: Ensures safe operation in wet environments, suitable for plumbing and sewer inspections.
• Audio and Video Recording: Capture full HD video and audio, supported by an included 32GB TF card for documentation.
• Ergonomisk design: Features an ergonomic grip and detachable kickstand for comfortable and stable use.

Figur 2: The DEPSTECH DS560TL borescope main unit with its flexible probe cable attached, ready for inspection.

Figur 3: An illustration detailing the internal components of the triple lens camera system, highlighting the Bluart 3.0 technology for enhanced clarity.

Figur 4: The borescope display showing the dual-view funktion, der tillader samtidig viewing from two different camera lenses.

3. Opsætning

3.1 Opladning af enheden

1. Connect the provided USB charging cable to the borescope unit's charging port.
2. Sæt den anden ende af USB-kablet i en standard 5V/1A USB-strømadapter (medfølger ikke) eller en computers USB-port.
3. The charging indicator light will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 3-4 hours.

Figur 5: The borescope unit being charged via a USB cable connected to a power outlet.

3.2 Indsættelse af TF-kortet

The device comes with a 32GB TF card pre-installed. If you need to replace it or ensure it's properly seated:

1. Locate the TF card slot on the side of the borescope unit.
2. Skub forsigtigt TF-kortet ind i stikket, indtil det klikker på plads. For at fjerne det skal du skubbe det igen, indtil det springer ud.

Figur 6: Et nærbillede view of the TF card slot on the borescope unit, illustrating how to insert the memory card.

3.3 Attaching the Probe Cable

Ensure the probe cable connector is aligned correctly with the port on the main unit and push firmly until it is securely connected.

3.4 Montering af tilbehør

The accessory kit includes a hook and a magnet. These can be screwed onto the tip of the camera probe for retrieving small objects or navigating in specific situations.

Figur 7: The included hook and magnet accessories, designed to attach to the end of the borescope probe for various tasks.

4. Betjeningsvejledning

4.1 Tænd/sluk

• For at tænde skal du trykke på og holde nede Magt knappen, indtil skærmen lyser.
• For at slukke, skal du trykke på og holde nede Magt knappen, indtil skærmen slukker.

4.2 Navigering i brugerfladen

Use the directional buttons (Up, Ned, Venstre, Højre) to navigate through menus and settings. Press the OK knappen for at bekræfte valg.

4.3 Skift kamera Views

The DS560TL features three lenses: a front camera and two side cameras. You can switch between these views or activate a dual-view vise.

• Press the camera switch button (often labeled with a camera icon or arrows) to cycle through front, side 1, side 2, and dual-view tilstande.
• In dual-view mode, you can typically see the front camera view alongside one of the side camera views.

Figur 8: The borescope screen displaying the options for switching between the front and side cameras, or activating a split-screen view.

4.4 Justering af LED-lysstyrke

The camera probe is equipped with adjustable LED lights to illuminate dark inspection areas.

• Use the dedicated light adjustment buttons (often labeled with a sun icon or +/-) to increase or decrease the brightness of the LEDs.
• There are typically multiple brightness levels to suit different environments.

Figur 9: The borescope probe tip showing the integrated LED lights and an illustration of their adjustable brightness levels.

4.5 Optagelse af billeder og videoer

• Tryk på for at tage et billede Foto knappen (normalt markeret med et kameraikon).
• For at starte videooptagelse skal du trykke på Optage button (usually marked with a video camera icon). Press it again to stop recording.
• Alle optagne medier gemmes på det isatte TF-kort.

4.6 Vedrviewi medier

• Enter playback mode by pressing the Menu or Afspilning knap.
• Use the directional buttons to browse through photos and videos.
• Trykke OK til view a selected item or play a video.

4.7 Billedrotation

The image on the display can be rotated 180 degrees for optimal viewing, especially when the probe is in an inverted position.

• Tryk på Rotere button (often indicated by a circular arrow icon) to flip the image 180 degrees.

Figur 10: The borescope screen demonstrating the 180-degree image rotation feature, useful for correcting inverted views during inspection.

5. Vedligeholdelse

5.1 Cleaning the Probe and Lenses

• After each use, especially in dirty or wet environments, gently wipe the camera probe and lenses with a soft, damp klæde.
• For stubborn dirt, use a small amount of mild soap solution. Ensure no liquid enters the main unit.
• Do not use abrasive cleaners or solvents, as these can damage the lens and probe material.

5.2 Device Storage

• Store the borescope unit and probe in the provided sturdy carrying case when not in use.
• Opbevar enheden et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Ensure the probe cable is coiled loosely to prevent damage or kinking.

5.3 Pleje af batterier

• For at forlænge batteriets levetid bør du undgå at aflade batteriet helt ofte.
• If storing the device for an extended period, charge it to approximately 50% every few months.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

DEPSTECH products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official DEPSTECH webhjemmeside for detaljerede garantivilkår.

For technical support, troubleshooting assistance, or inquiries regarding your DEPSTECH DS560TL borescope, please contact DEPSTECH customer service through their official webwebstedet eller kontaktoplysningerne på din produktemballage.

Du kan også besøge DEPSTECH Store on Amazon for yderligere produktinformation og supportressourcer.