PARKSIDE® 20V Akku Mursliber PWDSA 20-Li A1 Brugermanual

Indledning

Welcome to your new PARKSIDE® PWDSA 20-Li A1 Cordless Masonry Sander. This manual provides essential information for safe operation, proper setup, effective maintenance, and troubleshooting. Please read these instructions carefully before using the tool and keep them for future reference.

Image: PARKSIDE® PWDSA 20-Li A1 Cordless Masonry Sander. This image displays the overall design of the cordless masonry sander, highlighting its telescopic shaft and sanding head.

Sikkerhedsinstruktioner

Generelle sikkerhedsadvarsler for elværktøj:

• Læs alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer provided with this power tool. Failure to follow all instructions may result in electric shock, fire, and/or serious injury.
• Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
• Brug ikke elværktøj i eksplosive atmosfærer, i nærheden af ​​brændbare væsker, gasser eller støv. Elværktøj danner gnister, som kan antænde støv eller dampe.
• Hold børn og omkringstående væk mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.
• Use appropriate personal protective equipment (PPE) such as safety glasses, dust mask, hearing protection, and gloves.
• Ensure the power tool is switched off before making any adjustments, changing accessories, or storing power tools.
• Misbrug ikke ledningen. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts.
• Opbevar inaktivt elværktøj out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
• Vedligehold elværktøj. Tjek for fejljustering eller fastklæbning af bevægelige dele, brud på dele og enhver anden tilstand, der kan påvirke elværktøjets funktion. Hvis det er beskadiget, skal elværktøjet repareres før brug.
• Brug elværktøjet, tilbehøret og værktøjsbits i overensstemmelse med disse instruktioner under hensyntagen til arbejdsforholdene og det arbejde, der skal udføres.
• Brug og pleje af batteriværktøj: Genoplad kun med den oplader, der er angivet af producenten. Brug kun elværktøj med specifikt beregnede batteripakker.

Pakkens indhold

Upon unpacking, please verify that all the following items are present and undamaged:

• 1 x PARKSIDE® PWDSA 20-Li A1 Cordless Masonry Sander (main unit)
• 1 x nøgle
• 1 x bæretaske
• 1 x 2m Hose (for dust extraction)
• 1 x støvposer
• 8 x Sanding Paper (2 pieces each of 150, 180, 240, 400 grit)

Note: The battery and charger are not included with this product and must be purchased separately.

Produktegenskaber

The PARKSIDE® PWDSA 20-Li A1 Masonry Sander is designed with the following key features to enhance performance and user experience:

• Justerbar hastighed: Allows for optimal grinding results on various surfaces and materials.
• Extendable Telescopic Shaft: Aluminium shaft extends from 110 cm to 150 cm for reaching high areas.
• Støvudsugningstilslutning: Integrated port for connecting the included hose and dust bag or an external dust extraction system.
• Gimbal Joint Grinding Head: Provides flexibility for optimal adaptation to wall and ceiling contours.
• 225 mm Sanding Disc: Large diameter sanding disc with a convenient Velcro fastener for quick changes.
• Switchable LED Workpiece Illumination: Enhances visibility in dimly lit work areas.
• Ergonomiske håndtag: Non-slip design for comfortable and secure grip.
• Supporting T-handle: Aids in comfortable and controlled ceiling processing.
• Inclined Sanding Head: Facilitates easy overhead sanding.
• Foldable Device Head: Allows for space-saving storage and transport.

Opsætning

Attaching the Sanding Disc

The sanding disc attaches securely via a Velcro fastener system.

1. Ensure the sander is switched off and the battery is removed for safety.
2. Align the desired sanding paper with the 225 mm sanding plate, ensuring the holes on the paper match the dust extraction holes on the plate.
3. Press firmly to secure the sanding paper to the Velcro surface.

Assembling the Telescopic Shaft

The telescopic shaft allows for adjustable length to suit various working heights.

1. Locate the locking mechanism on the telescopic shaft.
2. Loosen the locking mechanism by twisting or releasing håndtaget.
3. Extend the shaft to the desired length between 110 cm and 150 cm.
4. Tighten the locking mechanism securely to fix the shaft in position.

Tilslutning af støvudsugning

For a cleaner work environment and improved visibility, connect the dust extraction system.

1. Attach the provided 2m hose to the dust extraction port on the sander.
2. Connect the other end of the hose to the included dust bag or an external vacuum cleaner designed for dust extraction.

Installation af batteriet

This tool operates on a 20V (2 Ah) battery (not included).

1. Sørg for, at slibemaskinens tænd/sluk-knap er i 'OFF'-positionen.
2. Slide a fully charged 20V battery pack into the battery slot on the tool until it clicks securely into place.
3. To remove the battery, press the release button and slide the battery pack out.

Betjeningsvejledning

Tænd/sluk

The power switch is located on the handle of the sander.

1. To turn the sander ON, tryk på afbryderknappen.
2. To turn the sander SLUKKET, press the power switch again.

Justering af hastighed

The sander features adjustable speed for optimal results on different materials.

1. Use the speed adjustment dial or buttons (if present) to select the desired idle speed between 600-1200 min⁻¹.
2. Lower speeds are generally suitable for fine finishing or delicate materials, while higher speeds are for aggressive material removal.

Using the LED Workpiece Illumination

The integrated LED light helps illuminate the work area for better visibility.

1. Locate the LED light switch on the tool.
2. Toggle the switch to turn the LED light on or off as required by your working conditions.

Sanding Technique

Follow these guidelines for effective and safe sanding:

• Always start the sander before placing it onto the workpiece surface.
• Apply light, even pressure. Allow the tool's weight and speed to do the work. Excessive pressure can reduce efficiency and damage the tool or surface.
• Move the sander smoothly and consistently over the surface in overlapping passes to ensure an even finish.
• The gimbal joint allows the sanding head to adapt to uneven surfaces, maintaining full contact.
• For ceiling work, utilize the supporting T-handle and the inclined sanding head for improved ergonomics and control.
• Regularly check the sanding disc for wear and replace it when necessary to maintain optimal performance.

Opretholdelse

Rensning

Regular cleaning ensures the longevity and optimal performance of your sander.

• Frakobl altid batteriet, før du udfører rengøring eller vedligeholdelse.
• Clean the tool regularly, paying special attention to the ventilation slots, to prevent dust buildup and overheating.
• Brug en blød, damp cloth for cleaning. Do not use solvents, abrasive cleaners, or harsh chemicals.
• Ensure the dust extraction port and hose are clear of any debris or blockages.

Changing Sanding Discs

Replace sanding discs when they become worn, torn, or clogged to maintain effective sanding.

1. Sørg for, at sliberen er slukket, og at batteriet er fjernet.
2. Carefully peel off the old sanding disc from the Velcro plate.
3. Attach a new sanding disc, ensuring it is centered on the sanding plate and firmly pressed onto the Velcro surface for secure adhesion.

Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på med din slibemaskine.

Sander Does Not Turn On

• Tjek batteri: Ensure the battery is fully charged and correctly inserted into the tool.
• Afbryderen: Verify that the power switch is fully engaged in the 'ON' position.
• Batterikompatibilitet: Confirm that the battery being used is compatible with the PARKSIDE® 20V system.

Poor Sanding Performance

• Worn Sanding Disc: Replace the sanding disc if it is worn out, clogged, or damaged.
• Forkert kornstørrelse: Ensure the correct grit sanding paper is used for the material and desired finish.
• Hastighedsindstilling: Adjust the speed to an appropriate level for the task.
• Overfladetilstand: Clean the workpiece surface of any loose debris before sanding.

Excessive Dust

• Dust Bag/Hose: Ensure the dust bag is properly attached and not full. Check that the dust extraction hose is securely connected and free from blockages.
• Eksternt system: If using an external dust extraction system, verify its functionality and suction power.

Specifikationer

Technical data for the PARKSIDE® PWDSA 20-Li A1 Cordless Masonry Sander:

Garanti og support

For warranty information, technical support, or service inquiries regarding your PARKSIDE® PWDSA 20-Li A1 Cordless Masonry Sander, please refer to the documentation provided with your original purchase. It is recommended to keep your proof of purchase for any warranty claims. You may also contact PARKSIDE® customer service directly through their official channels for assistance.