1. Introduktion
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TP-ET 18 Li BL-Solo 18V Cordless Compact Router. Please read these instructions carefully before using the tool and keep them for future reference.
The Einhell TP-ET 18 Li BL-Solo is a versatile cordless compact router designed for precision woodworking tasks such as edge milling, grooving, and decorative profiling. It features a powerful brushless motor for extended runtime and performance, electronic speed control, and a continuously adjustable milling depth.
2. Generelle sikkerhedsinstruktioner
ADVARSEL: Læs alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Undladelse af at følge alle instruktionerne nedenfor kan resultere i elektrisk stød, brand og/eller alvorlig personskade.
2.1 Arbejdsområdesikkerhed
- Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
- Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af brændbare væsker, gasser eller støv. Elværktøj danner gnister, som kan antænde støv eller dampe.
- Hold børn og omkringstående væk, mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.
2.2 Elektrisk sikkerhed
- Elværktøjsstik skal passe til stikkontakten. Modificer aldrig stikket på nogen måde.
- Undgå kropskontakt med jordede eller jordede overflader, såsom rør, radiatorer, komfurer og køleskabe. Der er en øget risiko for elektrisk stød, hvis din krop er jordet eller jordet.
- Udsæt ikke elværktøj for regn eller våde forhold. Vand, der trænger ind i et elværktøj, øger risikoen for elektrisk stød.
2.3 Personlig sikkerhed
- Brug altid øjenbeskyttelse. Brug sikkerhedsbriller, beskyttelsesbriller eller ansigtsskærm.
- Brug høreværn, når du bruger elværktøj i længere perioder.
- Klæd dig ordentligt på. Bær ikke løstsiddende tøj eller smykker. Hold dit hår og tøj væk fra bevægelige dele.
- Vær opmærksom, hold øje med, hvad du laver, og brug din sunde fornuft, når du betjener et elværktøj.
- Tving ikke elværktøjet. Brug det korrekte elværktøj til din applikation.
- Frakobl batteripakken fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
- Opbevar inaktivt elværktøj utilgængeligt for børn, og lad ikke personer, der ikke er bekendt med elværktøjet eller disse instruktioner, betjene elværktøjet.
- Vedligehold elværktøj og tilbehør. Kontroller for fejljustering eller fastklæbning af bevægelige dele, brud på dele og enhver anden tilstand, der kan påvirke elværktøjets funktion.
3. Komponenter og pakkeindhold
Your Einhell TP-ET 18 Li BL-Solo Cordless Compact Router package includes the following items:
- Einhell TP-ET 18 Li BL-Solo Compact Router (Tool Only)
- 2 x Collets (6mm and 8mm)
- Edge Milling Attachment
- 2 x Spanner Wrenches
- Copy Sleeve
- Suction Adapter
- Parallelt stop
- Compass Tip
Note: Battery and charger are NOT included with this 'Solo' version and must be purchased separately as part of the Einhell Power X-Change system.
Figure 1: Einhell TP-ET 18 Li BL-Solo Cordless Compact Router with included accessories. This image displays the main router unit, two collets, two spanner wrenches, an edge milling attachment, a copy sleeve, a suction adapter, a parallel stop, and a compass tip.
4. Opsætning
4.1 Batteriinstallation
- Ensure the router is switched off.
- Align the battery pack with the battery port on the top of the router.
- Skub batteripakken ind i porten, indtil den klikker sikkert på plads.
- For at fjerne den skal du trykke på udløserknappen på batteripakken og skubbe den ud.
Figure 2: The Einhell TP-ET 18 Li BL-Solo router is supplied without a battery or charger, highlighting the need for separate purchase of Power X-Change batteries.
4.2 Router Bit Installation
- Sørg for at batteriet er fjernet af sikkerhedsmæssige årsager.
- Tryk på spindellåseknappen og hold den nede for at forhindre spindlen i at rotere.
- Loosen the collet nut using one of the provided spanner wrenches.
- Insert the desired router bit into the collet, ensuring it is seated firmly but not bottomed out.
- Tighten the collet nut securely with the spanner wrench while holding the spindle lock.
Figur 3: Nærbillede view of the spindle lock button and collet area, essential for safe and easy router bit changes.
4.3 Attaching the Base Plate and Dust Extraction
- The transparent base plate is pre-installed. Ensure it is clean and free of debris.
- To attach the dust extraction adapter, align it with the designated port on the base plate and secure it. This allows connection to an external vacuum cleaner for a cleaner work environment.
Figure 4: The transparent base plate provides visibility of the workpiece during operation. The dust extraction port is visible for connecting a vacuum.
4.4 Adjusting Milling Depth
- Løsn håndtaget til dybdejustering.
- Rotate the fine adjustment knob to set the desired milling depth. The scale on the side indicates the depth in millimeters.
- Once the desired depth is set, tighten the depth adjustment lever to secure the router in position.
4.5 Attaching Guides (Parallel Stop, Compass Tip, Guide Roller)
Depending on your application, various guides can be attached to the router base for enhanced precision:
- Parallel Stop: Used for routing parallel to an edge. Slide the parallel stop into the slots on the router base and secure it at the desired distance from the bit.
- Compass Tip: For cutting perfect circles. Attach the compass tip to the base and pivot it around a central point.
- Guide Roller: For following curved edges or templates. Attach the guide roller to the base, ensuring it makes contact with the guide surface.
5. Betjeningsvejledning
5.1 Tænd/sluk
- To turn the router ON, slide the power switch to the 'I' position.
- To turn the router OFF, slide the power switch to the 'O' position.
5.2 Hastighedskontrol
The router features electronic infinitely variable speed control. Adjust the speed dial to match the material and router bit being used. Higher speeds are generally suitable for smaller bits and softer materials, while lower speeds are for larger bits and harder materials.
Figure 5: The speed control dial allows for precise adjustment of the router's RPM to suit different materials and applications.
5.3 Fræsningsteknikker
- Sørg altid for, at emnet er sikkert fastgjortamped før routing.
- Start fræseren, før du berører emnet.
- Move the router smoothly and consistently along the desired path. Avoid sudden movements or excessive pressure.
- For best results and to prevent kickback, always feed the router against the direction of bit rotation.
- When routing edges, use the edge milling attachment for precise chamfering.
5.4 Støvopsamling
For a cleaner work environment and improved visibility, connect a suitable wet/dry vacuum cleaner to the suction adapter. This helps to remove wood chips and dust during operation.
6. Vedligeholdelse
6.1 Rengøring
- Frakobl altid batteriet før rengøring.
- Regularly clean the router housing, base plate, and collet area to remove dust and debris. Use a soft brush or compressed air.
- Brug ikke aggressive rengøringsmidler eller opløsningsmidler.
6.2 Router Bit Care
- Keep router bits sharp and clean. Dull bits can cause overheating and poor cutting performance.
- Store bits in a protective case to prevent damage.
6.3 Generelt eftersyn
- Check all screws and fasteners regularly to ensure they are tight.
- Inspect the power cord (if applicable, for charger) for damage.
- Ensure all ventilation openings are clear to prevent overheating.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Routeren starter ikke | Batteriet er ikke isat korrekt eller afladet. | Check battery connection; charge or replace battery. |
| Poor cutting quality / Rough edges | Dull or damaged router bit. Incorrect speed setting. | Replace bit; adjust speed according to material. |
| Overdreven vibration | Router bit not properly secured. Damaged bit. | Re-tighten collet nut; replace damaged bit. |
| Motoren overophedes | Tilstoppede ventilationsåbninger. Overbelastning af værktøjet. | Clean ventilation slots; reduce cutting depth/feed rate. |
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Model | TP-ET 18 Li BL-Solo |
| Varenummer | 4350415 |
| Voltage | 18 Volts (Power X-Change) |
| Motortype | Børsteløs |
| Løftehøjde | 40 mm |
| Spændespændestørrelser | 6 mm, 8 mm |
| Maks. rotationshastighed | 3000 RPM (Note: Product description states 3000 RPM, title states 30000 RPM. Please verify with manufacturer for accurate specification.) |
| Produktdimensioner | 9.3 x 9.3 x 18.2 cm |
| Varens vægt | 1.34 kg |
| Materiale | Aluminium, plast |
| Strømkilde | Batteridrevet (Li-ion) |
Figure 6: The Einhell TP-ET 18 Li BL-Solo is part of the Power X-Change family, allowing battery compatibility across a wide range of Einhell tools.
Figure 7: Illustration highlighting the benefits of the PurePOWER brushless motor, including increased lifespan, runtime, and power compared to conventional motors.
9. Garanti og support
Your Einhell TP-ET 18 Li BL-Solo Cordless Compact Router comes with a 2-year warranty, ensuring safety and durability for your DIY projects. For warranty claims, technical support, or to explore other Einhell products, please visit the official Einhell store or contact customer service.
Officiel mærkebutik: Einhell Canada Butik
10. Produktvideoer
No official product videos from the seller directly related to the Einhell TP-ET 18 Li BL-Solo Cordless Compact Router were found in the provided data. Videos available were either for related products from other brands, from influencers, or for different Einhell tools.
