BESTTEN Super Slim Digital LED Dimmer Switch (Model USP-DS06M) Brugermanual

1. Introduktion

The BESTTEN Super Slim Digital LED Dimmer Switch (Model USP-DS06M) is designed to provide smooth, full-range dimming control for compatible lighting. This switch is suitable for use with dimmable LED, CFL, halogen, and incandescent bulbs. Its compact design allows for easy installation in standard electrical wall boxes. The dimmer features intuitive 3-button control, 8 LED brightness indicators, and an air gap power cut-off switch for enhanced safety during bulb replacement.

This manual provides essential information for the safe installation, operation, and maintenance of your dimmer switch. Please read it thoroughly before beginning installation.

Billede: Forside view of the BESTTEN Super Slim Digital LED Dimmer Switch, showcasing dets elegante design og kontrolknapper.

2. Sikkerhedsoplysninger

WARNING: To avoid fire, shock, or death, always turn off power at the circuit breaker or fuse and test that power is off before wiring. Improper installation can result in serious injury or damage.

• Denne enhed er beregnet til installation i overensstemmelse med National Electric Code og lokale bestemmelser.
• Do not use with non-dimmable bulbs. Using non-dimmable bulbs may cause damage to the dimmer or the bulbs.
• Only one dimmer switch can be installed in a 3-way circuit. This dimmer cannot be used in a 4-way circuit.
• Sørg for det samlede wattage of connected bulbs does not exceed the dimmer's maximum capacity: 600W for incandescent/halogen, 200W for dimmable LED/CFL.
• This dimmer requires no neutral wire for operation.
• Do not use this dimmer to control ceiling fans or motor-driven appliances.
• Hvis du er i tvivl om nogen del af disse instruktioner, skal du kontakte en kvalificeret elektriker.

3. Pakkens indhold

• 1x BESTTEN Super Slim Digital LED Dimmer Switch (Model USP-DS06M)
• 1x Screwless Wallplate
• Monteringsskruer

4. Produktet er slutview

Familiarize yourself with the components and controls of your BESTTEN Digital Dimmer Switch:

Image: Diagram illustrating the various parts of the BESTTEN Digital Dimmer Switch, including the Power Button, Luminance Indicator, Dimming Buttons (Up/Down), and the side-mounted Maximum/Minimum Brightness Buttons and Power Cut-off Button.

• Power knap: Press to turn lights ON or OFF.
• Luminance Indicator: 8 LED lights display the current brightness level.
• Dimming Button (UP): Press to increase light brightness.
• Dimming Button (Down): Tryk for at reducere lysstyrken.
• Maximum Brightness Button (Side): Adjusts the upper limit of the dimming range.
• Minimum Brightness Button (Side): Adjusts the lower limit of the dimming range to prevent flickering.
• Air Gap Power Cut-off Switch (Side): Pull out to disconnect power to the switch and light for safe bulb replacement. Push back in to restore power.

5. Installation (Opsætning)

Before installation, ensure you have read and understood all safety warnings. Installation procedures for 3-way wiring differ from standard single-pole wiring. It is recommended to watch the instructional video if available.

5.1 Ledningsdiagrammer

The BESTTEN dimmer switch is designed for both single-pole and 3-way applications. In 3-way applications, smart-chip technology allows the use of a standard single-pole switch in the other location. Only one dimmer switch can be installed per 3-way circuit.

Image: Detailed wiring diagrams for both single-pole and 3-way installations of the BESTTEN dimmer switch. This diagram shows connections for Line, Load, Ground, and Traveler wires.

5.2 Installationstrin

1. Sluk for strømmen: At the circuit breaker or fuse box, turn off the power to the switch location. Verify power is off using a voltage tester.
2. Fjern den gamle switch: Carefully remove the existing wallplate and switch from the wall box. Disconnect the wires from the old switch.
3. Identificér ledninger: Identify the Line (hot), Load, Ground, and Traveler wires (for 3-way installations). Refer to the wiring diagram.
4. Tilslut ledninger: Connect the wires to the new BESTTEN dimmer switch according to the appropriate wiring diagram for your setup (single-pole or 3-way). Use wire nuts to secure connections. The compact slim design of the dimmer facilitates installation in crowded electrical boxes.
5. Monter lysdæmper: Gently push the wired dimmer switch into the wall box. Secure it with the provided mounting screws.
6. Installer vægplade: Attach the screwless wallplate over the dimmer switch.
7. Gendan strøm: Tænd for strømmen igen ved afbryderen.

5.3 Installationsvideo

For a visual guide on the installation process, please refer to the official BESTTEN Dimmer Switch Installation Guide video:

6. Betjeningsvejledning

6.1 Grundlæggende betjening

• Tænd/sluk: Press the large Power Button to toggle the lights on or off.
• Juster lysstyrke: Press the UP or DOWN dimming buttons to gradually increase or decrease the light intensity. The 8 LED indicators will show the current brightness level.
• Quick Maximum Brightness: Press the UP button twice quickly to instantly set the lights to maximum brightness.
• Quick Minimum Brightness: Press the DOWN button twice quickly to instantly set the lights to the lowest dimmable setting.

6.2 Air Gap Power Cut-off Switch

The air gap switch is located on the side of the dimmer. Pull this switch out to completely cut power to the light fixture, allowing for safe bulb replacement or maintenance without needing to turn off the circuit breaker. Push the switch back in to restore power.

6.3 Adjusting Minimum and Maximum Brightness Levels

To optimize performance and prevent flickering with different bulb types, you can adjust the dimmer's minimum and maximum brightness settings:

Billede: Nærbillede view of the side of the BESTTEN dimmer switch, highlighting the small adjustment buttons for setting the minimum and maximum brightness levels.

1. Indstil minimum lysstyrke: Press the UP or DOWN button to adjust the brightness until the lowest desired light level is achieved and the lights are not flickering. Then, press the main power button 6 times quickly. The dimmer will save this as the new minimum brightness level.
2. Set Maximum Brightness: Similarly, adjust the brightness to the highest desired level. Then, press the main power button 6 times quickly. The dimmer will save this as the new maximum brightness level.

7. Vedligeholdelse

• Rensning: To clean the dimmer switch and wallplate, wipe with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
• Ingen dele, der kan serviceres af brugeren: The dimmer switch contains no user-serviceable parts. Do not attempt to disassemble or repair the unit. Contact customer support if the device malfunctions.

8. Fejlfinding

9. Specifikationer

Image: Technical diagram illustrating the super slim design and precise dimensions of the BESTTEN dimmer switch, highlighting its compact form factor.

10. Garanti og support

BESTTEN products are designed for quality and reliability. For warranty information or technical support, please contact BESTTEN customer service. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the official BESTTEN webwebstedet eller kontakt deres kundesupportkanaler.