1. Introduktion
Thank you for choosing the Zgrmbo MX6035 Digital Atomic Alarm Clock. This clock is designed to provide accurate timekeeping, indoor temperature, and humidity readings, along with a reliable alarm function. Its atomic synchronization feature ensures precise time without manual adjustments, and the battery-operated design offers portability and convenience.
Figure 1: Zgrmbo MX6035 Digital Atomic Alarm Clock
2. Pakkens indhold
- 1 x Zgrmbo MX6035 Digital Atomic Alarm Clock
- 1 x brugermanual
Bemærk: 3 x AAA-batterier er IKKE inkluderet og skal købes separat.
3. Produktfunktioner
- Accurate Atomic Time: Synkroniserer automatisk med WWVB-radioudsendelsen fra NIST i Fort Collins, Colorado, hvilket sikrer præcis tidtagning.
- Auto-Dimming Smart Night Light: Features a built-in ambient light sensor that automatically illuminates the display in dark environments. The display can also be manually lit by pressing the top of the clock.
- Alarm med snooze: A classic alarm function with a gradually increasing beep sound for 120 seconds. The top snooze button provides an extra 5-minute nap.
- Multi-Display: Shows time, date, indoor temperature (℉/℃), and indoor humidity.
- Battery Operated & Portable: Cordless design powered by 3 AAA batteries (not included), making it ideal for bedrooms, desks, or travel.
Figure 2: Atomic Time Synchronization
Figure 3: Automatic Night Light in use
Figure 4: Alarm with 5-Minute Snooze
Figure 5: Multi-Display Features
Figure 6: Battery Operated Design
4. Opsætningsvejledning
Follow these steps for initial setup of your Zgrmbo MX6035 Atomic Alarm Clock:
- Installer batterier: Open the battery compartment on the back of the clock and insert 3 new AAA batteries, ensuring correct polarity.
- Automatic WWVB Signal Search: Upon battery installation, the clock will automatically begin searching for the WWVB atomic signal. This process may take 7-14 minutes. Place the clock near a window, ideally facing Colorado, for optimal reception. A signal icon will appear on the display when reception is successful.
- Vælg tidszone: Once the signal is received and the time is set, press the SÆT button to cycle through and select your correct time zone (PST, MST, CST, EST).
Figure 7: Simple 3-Step Setup
Opsætning af videoguide
Video 1: Unboxing and Initial Setup of the MX6035 Alarm Clock. This video demonstrates how to unbox the clock, install batteries, and observe the initial synchronization process.
5. Betjeningsvejledning
5.1. Tid og datovisning
- The main display shows the current time.
- The date (month and day) is displayed below the alarm time.
- Indoor temperature (℉/℃) and humidity (%) are shown at the bottom right.
5.2. 12/24 Hour Format Switching
For at skifte mellem 12-timers (AM/PM) og 24-timers formater skal du trykke på UP knap.
Figure 8: 12/24 Hour Format Switching
5.3. Indstilling af alarmen
- Tryk på AL.SET button once to enter alarm setting mode. The alarm hour will flash.
- Brug UP or NED knapper for at justere alarmtiden.
- Trykke AL.SET again to confirm the hour and move to alarm minute setting. The alarm minute will flash.
- Brug UP or NED knapper for at justere alarmminut.
- Trykke AL.SET a third time to confirm and exit alarm setting mode. The alarm icon will appear on the display, indicating the alarm is active.
5.4. Snooze-funktion
When the alarm sounds, press the top of the clock (the ON/OFF button area) to activate the snooze function. The alarm will pause for 5 minutes and then sound again. You can repeat this process.
5.5. Disabling the Alarm
For at slukke alarmen helt, tryk på AL.SET button when the alarm is not sounding. The alarm icon on the display will disappear.
5.6. Manual Backlight Activation
In any lighting condition, press the top of the clock (the ON/OFF button area) to manually illuminate the display for a few seconds.
6. Vedligeholdelse
- Rensning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or chemicals.
- Udskiftning af batteri: When the display dims or functions become erratic, replace all three AAA batteries with new ones. Ensure correct polarity.
- Opbevaring: Hvis uret opbevares i længere tid, skal batterierne fjernes for at forhindre lækage.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Clock does not set time automatically / Time is incorrect. | Poor WWVB signal reception. Incorrect time zone selected. | Place the clock near a window, away from electronic interference. Allow 7-14 minutes for signal reception. Ensure the correct time zone is selected using the SÆT button. If reception is consistently poor, you may need to manually set the time (see manual for advanced settings, if available, or try re-inserting batteries to force a new signal search). |
| Baggrundsbelysningen er svag eller virker ikke. | Low batteries. Ambient light sensor detecting too much light. | Replace batteries with new ones. Ensure the clock is in a sufficiently dark environment for the auto-dimming feature to activate. Manually press the top of the clock to check if the backlight works. |
| Alarmen lyder ikke. | Alarmen er ikke aktiveret. Alarmens lydstyrke er for lav (hvis justerbar). | Ensure the alarm icon is visible on the display. If not, set the alarm as per section 5.3. This model has a fixed alarm volume. |
| Skærmen er tom eller flimrer. | Lave eller døde batterier. | Udskift alle tre AAA-batterier med nye. |
| Daylight Saving Time (DST) adjustment issue. | Clock not automatically adjusting for DST. | The clock is designed to automatically adjust for DST based on the WWVB signal. Ensure good signal reception. If manual override is needed, consult the full product manual for specific button sequences (often involves the NED knappen eller SÆT button in advanced modes). |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Zgrmbo |
| Model | MX6035 |
| Display Type | Digital LCD |
| Strømkilde | 3 x AAA batterier (medfølger ikke) |
| Produktdimensioner | 5.5 cm B x 3.25 cm H |
| Materiale | Acrylonitril Butadien Styren (ABS) |
| Temperaturområde | 32℉ til 122℉ (0℃ til 50℃) |
| Fugtighedsområde | 20% RH til 95% RH |
| Særlige funktioner | Atomic Time, Auto-Dimming Night Light, Alarm, Snooze, Date Display, Indoor Temp/Humidity |
9. Garanti og support
For warranty information or technical support, please refer to the product packaging or contact the seller/manufacturer directly through your purchase platform. Keep your proof of purchase for any warranty claims.
Manufacturer: MEIZHOU MINGXING ELECTRONICS CO.,LTD
