Indledning
The NITECORE BB Nano is a compact and versatile electronic air blower designed for efficient dust removal from sensitive equipment such as cameras, lenses, and other electronics. Its portable design and powerful performance make it suitable for both indoor and outdoor use.
Image: The NITECORE BB Nano electronic air blower shown with its included NITECORE keychain tag.
Pakkens indhold
- NITECORE BB Nano Electronic Air Blower
- NITECORE Nøglering Tag
- USB-C Charging Cable (not explicitly listed but implied for rechargeable devices)
Note: Enhanced Cleaning Kit and Vacuum Attachment Kit are not included with the standard package.
Produktegenskaber
- Kompakt og let: Weighs only 99g (3.49 oz), designed for portability.
- Kraftig motor: Equipped with a 30W high-power motor and a 35mm integrated impeller with 18 spiral blades for efficient blowing performance.
- High Dust Removal Pressure: Delivers 2.6 kPa wind pressure, comparable to the NITECORE BB2 Air Blower.
- Unidirectional Air Intake: Prevents secondary damage to surfaces by ensuring clean air intake.
- Højdensitetsfilter: Features a 250-mesh nylon filter, 25% denser than conventional 200-mesh filters, for meticulous dust filtration.
- Genopladeligt batteri: Built-in 4.8Wh Li-ion battery provides approximately 90 cleaning times on a full charge.
- Holdbar konstruktion: Made from high-quality PC material with a detachable premium silicone nozzle.
- Optional Vacuuming Function: Compatible with optional vacuuming attachments (sold separately) to prevent dust from re-entering the air duct.
Image: Diagram illustrating the NITECORE BB Nano's 30W high-power motor and integrated impeller, highlighting its 2.6 kPa dust removal wind pressure.
Image: Comparison of the NITECORE BB Nano's 250-mesh nylon filter with a conventional 200-mesh filter, demonstrating superior dust filtration.
Image: Visual representation of the power indicator light: Green (Above 50%), Blue (Below 50%), Red (Below 10%).
Opsætning
1. Første opladning
- Before first use, fully charge the BB Nano.
- Connect the included USB-C charging cable to the charging port on the device.
- Tilslut den anden ende af kablet til en USB-strømkilde (f.eks. en vægadapter eller en computers USB-port).
- The power indicator light will show charging status and turn off when fully charged.
2. Montering af dysen
- Ensure the silicone nozzle is securely attached to the blower's air outlet.
- The nozzle is detachable for cleaning or replacement.
Betjeningsvejledning
Tænd/sluk
- For at tænde: Tryk og hold tænd/sluk-knappen nede.
- For at slukke: Tryk på tænd/sluk-knappen igen, og hold den nede.
Cleaning Modes and Wind Speeds
The BB Nano offers two cleaning modes and two wind speed options:
- Fast Cleaning (High Wind Speed): Press and hold the power button to activate. This mode provides efficient cleaning.
- Constant Cleaning (Low Wind Speed): Double-press the power button to activate. This mode operates with minimal noise.
Image: Visual guide showing the two wind speed options (High for efficient cleaning, Low for minimal noise) and two cleaning modes (Fast Cleaning by pressing and holding, Constant Cleaning by double-pressing).
Anvendelse Eksamples
- Photography Equipment: Use to remove dust from camera sensors, lenses, and camera bodies.
- Elektronik: Ideal for cleaning keyboards, computer components, and other delicate electronics.
- General Dusting: Suitable for various indoor and outdoor dusting tasks.
Image: Using the BB Nano to clean a camera sensor.
Image: Using the BB Nano to clean a computer keyboard.
Image: Using the BB Nano to clean a car interior.
Image: Using the BB Nano for cleaning during outdoor photography.
Opretholdelse
1. Rengøring/udskiftning af filter
- The 250-mesh nylon filter is designed to intercept fine dust.
- Regularly inspect the filter for accumulated dust.
- To clean, gently remove the filter and tap out any loose dust. If heavily soiled, it may be rinsed with water and thoroughly dried before reinstallation.
- Replace the filter if it becomes damaged or excessively clogged.
2. Nozzle Care
- The silicone nozzle is detachable.
- Clean the nozzle as needed to ensure unobstructed airflow.
3. Opbevaring
- Store the BB Nano in a cool, dry place when not in use.
- Undgå at udsætte enheden for ekstreme temperaturer eller direkte sollys.
Fejlfinding
- Enheden tænder ikke: Sørg for, at batteriet er opladet. Tilslut til en strømkilde, og prøv igen.
- Svag luftstrøm: Check if the filter is clogged and clean or replace it. Ensure the nozzle is securely attached.
- Usædvanlig støj: Discontinue use and inspect for any obstructions in the air intake or nozzle. If the issue persists, contact customer support.
Specifikationer
| Model | BB nano |
| Mærke | Nitecore |
| Varens vægt | 3.49 ounces (99 gram) |
| Pakkedimensioner | 5.47 x 4.17 x 2.24 tommer |
| Materiale | Silicone (nozzle), PC (body) |
| Magt | 30W High Power Motor |
| Dust Removal Wind Pressure | 2.6 kPa |
| Batteri | Built-in 4.8Wh Li-ion battery (1 Lithium Polymer battery included) |
| Filtertype | 250-mesh nylon filter |
Sikkerhedsoplysninger
- Do not point the air blower directly at eyes or sensitive body parts.
- Opbevares utilgængeligt for børn.
- Enheden må ikke nedsænkes i vand, og den må ikke udsættes for overdreven fugtighed.
- Brug kun det specificerede opladningskabel og strømkilde.
- Undgå at skille enheden ad eller ændre den, da dette kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
- Ensure the air intake is not blocked during operation to prevent overheating.
Garanti og support
For warranty information and customer support, please refer to the official NITECORE webwebstedet eller kontakt din lokale forhandler. Gem din købskvittering som købsbevis.
Manufacturer: SYSMAX Innovations Co., Ltd.
