LEHMANN LGALM-2646

Lehmann LGALM-2646 Gasoline Lawn Mower User Manual

Model: LGALM-2646

1. Introduktion

Thank you for choosing the Lehmann LGALM-2646 Gasoline Lawn Mower. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new lawn mower. Please read this manual thoroughly before operating the machine and keep it for future reference.

1.1 Sikkerhedsinstruktioner

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or death.

2. Produktet er slutview

Familiarize yourself with the components of your Lehmann LGALM-2646 lawn mower.

Lehmann LGALM-2646 Gasoline Lawn Mower with grass bag, extra blades, and oil bottle

Figur 2.1: Samlet set view of the Lehmann LGALM-2646 Gasoline Lawn Mower, including the grass collection bag, two spare blades, and a bottle of engine oil.

Close-up of the Lehmann LGALM-2646 lawn mower handlebar with labeled controls

Figur 2.2: Detaljeret view of the handlebar controls. (1) Engine Stop Lever, (2) Drive Lever.

2.1 nøglekomponenter

3. Opsætning

3.1 Montering

The lawn mower requires minimal assembly. Follow these steps:

  1. Pak alle komponenter ud af kartonen.
  2. Attach the handlebar to the main unit using the provided bolts and knobs. Ensure the handle is securely locked in the operating position.
  3. Assemble the grass collection bag if it came disassembled.
  4. Mount the grass collection bag onto the rear of the mower.

3.2 Indledende kontrol

Before first use, perform the following checks:

4. Betjening

4.1 Start af motoren

Follow these steps to start your lawn mower:

Hand pulling the recoil starter cord on the Lehmann LGALM-2646 lawn mower

Figure 4.1: Starting the engine by pulling the recoil starter cord.

  1. Ensure the lawn mower is on a flat, level surface.
  2. Press the primer bulb (if equipped) 3-5 times until fuel is visible.
  3. Hold the engine stop lever (1 in Figure 2.2) firmly against the handlebar. The engine will not start unless this lever is held.
  4. Pull the recoil starter cord with a swift, continuous motion until the engine starts. Do not let the cord snap back.
  5. Once the engine starts, release the recoil starter cord slowly.
  6. To engage the rear-wheel drive, hold the drive lever (2 in Figure 2.2) against the handlebar. Release it to disengage.

4.2 Slåning

For best results, mow when the grass is dry. Overlap cutting swaths slightly to ensure even coverage.

Lehmann LGALM-2646 lawn mower operating on green grass

Figure 4.2: The lawn mower in operation on a lawn.

4.3 Justering af klippehøjde

The Lehmann LGALM-2646 features a 7-stage central cutting height adjustment, ranging from 25 mm to 70 mm.

  1. Sluk motoren og vent, indtil klingen er stoppet helt.
  2. Find håndtaget til justering af klippehøjden, typisk i nærheden af ​​et af baghjulene.
  3. Træk håndtaget udad, og flyt det til den ønskede højdeindstilling. Indstillingerne er normalt nummererede eller angivet med hak.
  4. Sørg for, at alle hjul er indstillet til samme højde for at opnå et jævnt snit.

5. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the life of your lawn mower. Always disconnect the spark plug cap before performing any maintenance.

5.1 Rengøring

Clean the mower after each use, especially the cutting deck, to prevent grass buildup and corrosion.

Underside of the Lehmann LGALM-2646 lawn mower deck, highlighting the area to clean

Figure 5.1: Area under the cutting deck that requires regular cleaning to prevent grass buildup and maintain performance.

Image showing 'No Corrosion Warranty' on the Lehmann LGALM-2646 lawn mower

Figure 5.2: The robust steel housing is designed to resist corrosion, contributing to the mower's longevity.

5.2 Pleje af blade

A sharp blade ensures a clean cut and healthy lawn. Inspect the blade regularly for sharpness and damage.

5.3 Opbevaring

For long-term storage (over 30 days), prepare the mower as follows:

6. Fejlfinding

Dette afsnit indeholder løsninger på almindelige problemer, du kan støde på.

ProblemMulig årsagLøsning
Motoren starter ikkeNo fuel; Spark plug cap loose; Engine stop lever not held; Stale fuel; Clogged fuel filter; Faulty spark plug.Add fresh fuel; Connect spark plug cap securely; Hold engine stop lever; Drain and refill with fresh fuel; Clean/replace fuel filter; Replace spark plug.
Motoren kører ujævnt eller går i ståDirty air filter; Stale fuel; Clogged carburetor; Incorrect oil level.Clean/replace air filter; Drain and refill with fresh fuel; Clean carburetor (professional service recommended); Adjust oil level.
Ujævn snitDull or bent blade; Wheels set to different heights; Uneven terrain.Sharpen or replace blade; Ensure all wheels are at the same cutting height; Mow on level ground where possible.
Overdreven vibrationBent or unbalanced blade; Loose blade bolt; Debris caught in blade area.Inspect and replace blade if bent; Tighten blade bolt; Clear debris from under the deck.

7. Specifikationer

Technical data for the Lehmann LGALM-2646 Gasoline Lawn Mower.

FeatureDetalje
ModelnummerLGALM-2646
Motorens slagvolumen146 cm³
Motorkraft3.5 HK
DrevtypeRear-Wheel Drive (Gasoline-powered)
Skærebredde46 cm
Justering af klippehøjde7-stage central adjustment
Klippehøjdeområde25 - 70 mm
Materiale til husRobust Steel
StyrFolding funktion
Varens vægt29 kg
Produktmål (D x B x H)150 x 52 x 112 cm
FarveSort/rød

8. Garanti og support

For warranty information or technical support, please contact Lehmann customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Lehmann webwebsted eller kontakt din lokale forhandler.

Fabrikant: Lehmann
Mærke: LEHMANN

Relaterede dokumenter - LGALM-2646

Preview LEHMANN CNC-rotationsborde - Hovedkatalog Udgave 4 | PGD-, E- og DD-serien
LEHMANNs hovedkatalog, udgave 4, til CNC-drejeborde. Udforsk PGD, E-serien, DD-serien og mere. Højhastighedsløsninger uden slør til industriel automatisering og præcisionsfremstilling.
Preview Lehmann Firmware Updater: Brugsanvisning til låse og RFID-læsere
Dette dokument indeholder betjeningsvejledning til LEHMANN Firmware Updater-softwaren, der beskriver, hvordan man opdaterer firmware på Lehmann-låse, RFID-læsere og terminaler. Indeholder systemkrav, kompatible produkter og trinvis vejledning.
Preview Brugervejledning til LEHMANN Management Software: Konfiguration og drift
Omfattende brugervejledning til LEHMANN Management Software (LMS), der beskriver konfiguration, betjening og administration af LEHMANN RFID-systemer i både offline og online tilstand. Dækker transponder- og låseadministration, brugerindstillinger og systemadministration.
Preview LEHMANN GIRO TA Elektronisches Tastaturschloss mit P2/P4 Adapter - Bedienungsanleitung
Umfassende Bedienungsanleitung für das LEHMANN GIRO TA elektronische Tastaturschloss mit P2/P4 Adapter. Enthält Informationen zur Installation, Bedienung, Sicherheit, Wartung, Konfiguration und Fehlerbehebung.
Preview LEHMANN Primary und Secondary Controller Bedienungsanleitung
Diese Bedienungsanleitung beschreibt die Installation, Konfiguration und Wartung der LEHMANN Primary und Secondary Controller für das Captos und Captos iCharge RFID-Schließsystem.
Preview LEHMANN M610 LEGIC L043-A03 Elektronisk Skabslås Brugsanvisning
Omfattende betjeningsvejledning til den elektroniske skabslås LEHMANN M610 LEGIC L043-A03, der dækker installation, programmering, betjening, vedligeholdelse og fejlfinding.