Spigen AMP06527

Spigen AMP06527 3-i-1 Qi2 MagSafe trådløs opladningsstation brugsanvisning

Model: AMP06527 | Brand: Spigen

Indledning

This manual provides detailed instructions for the safe and efficient use of your Spigen AMP06527 3-in-1 Qi2 MagSafe Wireless Charging Station. This device is designed to simultaneously charge your compatible iPhone, Apple Watch, and AirPods.

Spigen 3-in-1 Charging Station with iPhone, Apple Watch, and AirPods charging

Image: The Spigen 3-in-1 Charging Station in Gunmetal, actively charging an iPhone, Apple Watch, and AirPods simultaneously. The iPhone and Apple Watch display charging indicators.

Pakkens indhold

Kontroller venligst, at alle varer er til stede i din pakke:

  • Spigen AMP06527 3-in-1 Qi2 MagSafe Wireless Charging Station
  • Brugermanual

Note: A 35W wall adapter or higher is required for optimal fast charging and is not included. The Apple Watch charging cable is also not included.

Opsætningsinstruktioner

Følg disse trin for at konfigurere din ladestation:

  1. Install the Apple Watch Charging Cable:

    The charging station features a dedicated slot for your Apple Watch charging cable. Carefully route your existing USB-A or USB-C Apple Watch charging cable through the designated channels within the watch charging module. Ensure the charging puck is securely seated in its position.

    Detaljeret view of the Apple Watch charging module with USB-A and USB-C ports

    Billede: Nærbillede view of the Apple Watch charging area, showing compatibility with both USB-A and USB-C cables. The watch charging puck is not included.

    Step-by-step guide for installing the Apple Watch charging cable

    Image: A visual guide demonstrating the three steps to install the Apple Watch charging cable into the station's module, ensuring proper cable management and secure placement.

  2. Tilslut til strøm:

    Connect the charging station to a power source using a USB-C cable (not included). For optimal performance and fast charging, use a 35W or higher power adapter.

Konfigurationsvideoguide:

Video: This official Spigen video demonstrates the installation process for the Apple Watch charging cable and the overall setup of the 3-in-1 charging station.

Betjeningsvejledning

Spigen AMP06527 charging station allows for simultaneous charging of three devices:

  • iPhone (MagSafe Compatible): Place your MagSafe-compatible iPhone (iPhone 12 series and newer) onto the vertical charging pad. The magnetic connection will secure the phone and initiate Qi2 fast wireless charging up to 15W.
  • Apple Watch: Place your Apple Watch onto the installed charging puck. Ensure it is properly aligned to begin charging.
  • AirPods: Place your AirPods case onto the designated charging area at the base of the stand. An LED indicator will confirm charging status.
Spigen 3-in-1 Charging Station charging an iPhone, Apple Watch, and AirPods

Image: The charging station with an iPhone, Apple Watch, and AirPods in their respective charging positions. The image highlights 15W charging for the iPhone and 5W for the Apple Watch, emphasizing the need for a 35W wall charger.

LED Charging Indicator for AirPods:

The charging station features an LED light at the front to indicate the charging status of your AirPods. A green light typically indicates active charging.

AirPods charging alignment and LED indicator

Image: This image illustrates the correct alignment for AirPods charging, showing the LED indicator on the charging station and on the AirPods case. It also shows an example of incorrect alignment where charging would not occur.

Kompatibilitet

Spigen AMP06527 charging station is compatible with a wide range of Apple devices:

  • iPhones: iPhone 17 / 17 Pro / 17 Pro Max / iPhone Air / 16 / 16 Plus / 16 Pro / 16 Pro Max / 15 / 15 Plus / 15 Pro / 15 Pro Max / 14 / 14 Plus / 14 Pro / 14 Pro Max / 13 mini / 13 / 13 Pro / 13 Pro Max / 12 mini / 12 / 12 Pro / 12 Pro Max, and MagSafe compatible cases.
  • Apple Watch: Apple Watch Series 11 / 10 / 9 / 8 / 7 / 6 / 5 / 4 / 3 / 2 / 1, Apple Watch Ultra Series 3 / 2 / 1, Apple Watch SE 3 / 2 / 1.
  • AirPods: AirPods Pro 3 / 2 / 1, AirPods 4, 3.
Compatibility chart for Spigen 3-in-1 Charging Station

Image: A visual representation of the charging station's compatibility, showing an iPhone 12 or newer, various Apple Watch series, and AirPods 4/3 along with AirPods Pro 2/1.

Opretholdelse

For at sikre din ladestations levetid og optimale ydeevne skal du følge disse vedligeholdelsesretningslinjer:

  • Rensning: Disconnect the charger from the power source before cleaning. Use a soft, dry, lint-free cloth to wipe the surfaces. Avoid using abrasive cleaners, solvents, or aerosol sprays, as these can damage the finish or internal components.
  • Opbevaring: Når ladestationen ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
  • Kabelpleje: Avoid bending or crimping the charging cables excessively. Ensure cables are not under tension when connected to the device or power source.

Fejlfinding

If you encounter issues with your Spigen AMP06527 charging station, refer to the following common solutions:

  • Enheden oplades ikke:
    • Ensure the charging station is properly connected to a functional power outlet and a 35W or higher power adapter.
    • Verify that your device (iPhone, Apple Watch, AirPods) is correctly placed and aligned on its respective charging area. For AirPods, check the LED indicator.
    • Remove any thick cases from your iPhone that might interfere with wireless charging, especially if they are not MagSafe compatible.
    • Confirm that the Apple Watch charging cable is securely installed within the station's module and connected to the internal USB port.
  • Langsom opladning:
    • Ensure you are using a 35W or higher power adapter. Lower wattage adapters may result in slower charging speeds, especially when charging multiple devices simultaneously.
    • Check that your iPhone is MagSafe compatible and properly aligned for optimal Qi2 15W charging.
  • LED Indicator Not Lighting Up for AirPods:
    • Ensure the AirPods case is centered on the charging pad. Slight misalignment can prevent charging.
    • Confirm the AirPods case is closed.
  • Overophedning:
    • It is normal for the charger and devices to become slightly warm during charging. However, if excessive heat is detected, disconnect the charger immediately and allow it to cool down. Ensure adequate ventilation around the charging station.

Specifikationer

FeatureDetalje
ModelnummerAMP06527
MærkeSpigen
Produktdimensioner5.08 x 4.09 x 4.02 tommer
Varens vægt2.47 ounce
Connector TypeUSB
Speciel funktionFast Charging (Qi2 15W)
Input bindtage9 volt
Ampslette2.33 Amps
Samlet USB-porte3 (1x USB-C Power Input, 1x USB-A for Watch Cable, 1x USB-C for Watch Cable)
Wattage15 watt (maks. for iPhone)
FarveGunmetal

Garanti og support

Spigen products are designed for durability and performance. For information regarding product warranty, please refer to the official Spigen webwebstedet eller kontakt deres kundesupport direkte.

For teknisk assistance eller yderligere forespørgsler, besøg venligst Spigen Inc. seller page on Amazon or the official Spigen support channels.

Relaterede dokumenter - AMP06527

Preview Spigen ArcField Dual Trådløs Oplader PF2100 Brugermanual
Officiel brugermanual til Spigen ArcField Dual Wireless Charger PF2100, med detaljerede oplysninger om opsætning, sikkerhedsinstruktioner, specifikationer og garanti.
Preview Spigen Essential Qi2.2 Peltier trådløs biloplader EV25MFAQ brugermanual
Brugermanual til Spigen Essential Qi2.2 Peltier trådløs biloplader (model EV25MFAQ), der beskriver installation, funktioner, specifikationer og sikkerhedsoplysninger.
Preview Spigen Essential Qi2 3-i-1 trådløs oplader brugermanual
Brugermanual til Spigen Essential Qi2 3-i-1 trådløs oplader (model EF223MS), der beskriver dens funktioner, opladningsinstruktioner, LED-indikatordisplay, sikkerhedsforanstaltninger, specifikationer og garantioplysninger.
Preview Spigen PowerArc ArcField magnetisk trådløs oplader PF2009 til MagSafe iPhone AirPods
Brugermanual og specifikationer til Spigen PowerArc ArcField magnetisk trådløs oplader PF2009. Denne oplader er kompatibel med MagSafe iPhones og AirPods og tilbyder 7.5 W trådløs opladning via USB-C PD-indgang. Indeholder sikkerhedsforanstaltninger, information om overholdelse af regler og garanti.
Preview Spigen Essential Qi2.2 2-i-1+C Trådløs Oplader EF302MOQ Brugermanual
Brugermanual til Spigen Essential Qi2.2 2-i-1+C trådløs oplader (EF302MOQ), der beskriver opladningsinstruktioner, sikkerhedsforanstaltninger, specifikationer og overholdelse af regler.
Preview Spigen ArcDock GaN 1204 4-Port USB-opladerstation Brugermanual - PD2100
Brugermanual til Spigen ArcDock GaN 1204 4-Port USB-opladestation (model PD2100). Indeholder instruktioner, sikkerhedsadvarsler, specifikationer og oplysninger om overholdelse af lovgivningen for denne 120W GaN-oplader.