NOYAFA NF-859GS Netværkskabeltester Brugermanual

1. Introduktion

The NOYAFA NF-859GS is a multi-functional network cable tester designed for comprehensive network and telephone line inspection. It integrates various testing capabilities including Power over Ethernet (PoE) detection, RJ45 and RJ11 cable testing for CAT5, CAT5E, CAT6, and CAT6A cables, continuity detection, cable length measurement, and cable tracking. This manual provides detailed instructions for the safe and effective operation of your device.

2. Sikkerhedsoplysninger

Please read all safety warnings and instructions carefully before using this product to prevent electric shock, fire, or injury. Keep this manual for future reference.

• Brug ikke enheden i nærheden af ​​vand eller i damp miljøer.
• Ensure the device is powered off before connecting or disconnecting cables.
• Forsøg ikke selv at reparere eller ændre enheden. Overlad al service til kvalificeret personale.
• Use only specified accessories and power sources.
• Undgå at udsætte enheden for ekstreme temperaturer eller direkte sollys.
• Always wear appropriate personal protective equipment when working with electrical systems.

3. Pakkens indhold

Kontroller, at alle varer er til stede og i god stand ved udpakning:

• NF-859GS Main Tester Unit
• NF-859GS Receiver Unit
• RJ45 Adapter Cable
• RJ11 Adapter Cable
• Alligator Clip kabel
• Brugermanual
• Bæretaske

4. Produktet er slutview

The NF-859GS consists of a main tester unit with an LCD display and control buttons, and a receiver unit for cable tracing and identification.

Figur 4.1: NOYAFA NF-859GS Network Cable Tester main unit and receiver. The main unit features an LCD screen and navigation buttons, while the receiver unit has LED indicators for signal strength and cable identification.

4.1 Main Tester Unit

• LCD-skærm: Shows test results, cable status, length, and other relevant information.
• RJ45-port: For testing Ethernet cables.
• RJ11-port: For testing telephone lines.
• Kontrolknapper: Power, Left, Enter, Right, ESC for navigation and function selection.

4.2 Modtagerenhed

• Signallys: Indicates detected signal strength during cable tracing.
• RJ45-port: For connecting the remote end of the cable during tracing or continuity tests.
• LED-indikatorer: For displaying wire map results (e.g., open, short, cross).
• Følsomhedsjustering: Dial to adjust the sensitivity for cable tracing.

5. Opsætning og grundlæggende betjening

5.1 Tænd/sluk

• To power on the main unit, press and hold the Magt knap.
• For at slukke, skal du trykke på og holde nede Magt knappen igen, indtil displayet slukker.

5.2 Navigation

• Brug Venstre og Højre knapper til at navigere gennem menupunkter.
• Tryk på Indtast button to confirm a selection or start a test.
• Tryk på ESC knappen for at vende tilbage til den forrige menu eller afslutte en funktion.

6. Driftstilstande og funktioner

6.1 Network Cable Testing (RJ45, RJ11)

This function tests the continuity and wiring sequence of RJ45 (CAT5, CAT5E, CAT6, CAT6A) and RJ11 (CAT3) cables.

1. Connect one end of the cable to the RJ45 or RJ11 port on the main tester unit.
2. Connect the other end of the cable to the corresponding port on the receiver unit.
3. Select the "Continuity Test" or "Wire Map" function from the main menu.
4. Trykke Indtast to start the test. The LCD will display the wiring status (e.g., straight-through, crossover, open, short).

6.2 Cable Length Measurement

Accurately measures the length of network cables (2.5-200 meters) and identifies fault distances.

1. Ensure the cable is disconnected from all network devices.
2. Connect one end of the cable to the RJ45 port on the main tester unit. The other end should be open.
3. Select the "Length Measurement" function from the main menu.
4. Trykke Indtast to start the measurement. The LCD will display the cable length and any detected fault distances (e.g., open circuit, short circuit).

6.3 PoE Testing

Detects Power over Ethernet (PoE) presence, voltage, and standard (802.3af/at).

1. Connect the network cable from the PoE source to the RJ45 port on the main tester unit.
2. Select the "PoE Test" function from the main menu.
3. Trykke Indtast. The display will show PoE voltage, polarity, and the PoE standard (IEEE 802.3af/at or non-standard).

6.4 Cable Tracking (Toner Function)

Locates and identifies specific cables within a bundle or wall.

1. Connect the cable to be traced to the RJ45 or RJ11 port on the main tester unit.
2. Select the "Scan" or "Cable Tracking" function on the main unit. Choose between "Normal Mode", "Anti-interference Mode", or "PoE Mode" as needed.
3. Turn on the receiver unit and adjust its sensitivity.
4. Move the receiver unit along the suspected cable path. The signal light and audible tone on the receiver will indicate the presence of the traced cable.

6.5 Port Flash

Helps locate the corresponding network port on a switch or router by causing its indicator light to flash.

1. Connect the network cable from the main tester unit's RJ45 port to an active port on a switch or router.
2. Select the "Port Flash" function from the main menu.
3. The main unit will send a signal that causes the connected port's indicator light on the switch/router to flash, allowing for easy identification. This function supports 10M/100M/1000M hubs/switches.

7. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the device in its carrying pouch in a cool, dry place away from direct sunlight and extreme temperatures.
• Batteri: If the device uses replaceable batteries (not specified, assuming internal rechargeable or standard AA/AAA), ensure they are charged or replaced as needed. Remove batteries if storing for extended periods to prevent leakage.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official NOYAFA webwebsted. Gem din købsbevis til garantikrav.

For further assistance, you may contact NOYAFA customer service via their official channels. Please have your model number (NF-859GS) and purchase date ready.