T01 Intelligent Portable Camera Detector

1. Introduktion

The BANYUP T01 Intelligent Portable Camera Detector is a versatile device designed to enhance your privacy and security by detecting hidden cameras, listening devices, and GPS locators. Utilizing advanced detection technology, the T01 helps you quickly identify and locate suspicious devices in various environments, such as hotels, conference rooms, bathrooms, and dressing rooms. Its compact and lightweight design makes it an ideal tool for personal protection on the go.

Figure 1: The T01 Intelligent Portable Camera Detector.

2. Produktet er slutview

2.1 Nøglefunktioner

• Avanceret detektion: Features infrared detection, location detection, and signal detection capabilities to identify various hidden devices.
• High Sensitivity Chip: Equipped with a newly upgraded high-sensitivity chip for fast and accurate detection across a wide frequency range (100MHz-2.7G).
• Justerbar følsomhed: Offers 6-level detection intensity adjustment, allowing for precise detection of signals, including uploaded data packets from locators.
• Lang batterilevetid: Integrated 500mAh rechargeable battery provides up to 10 hours of continuous working time on a single charge (2-3 hours charging time).
• Type-C opladning: Convenient Type-C interface for charging via computer USB, power banks, or wall adapters, with built-in input and overcharge protections.
• Kompakt og bærbar: Lightweight and small design (approx. 11.2x2.85x1.6cm) makes it easy to carry in a pocket or backpack for discreet use.

2.2 Produktkomponenter

Figure 2: Labeled diagram of the T01 Camera Detector, showing the Antennae, Lens identification lenses, LED infrared light, Signal indicator, Camera IR Detection Key, Signal Detection Function Keys, Switch key/Sensitivity Adjustment, and Charging port.

• Antenner: Extends for signal detection.
• Lens Identification Lenses: Used for visual detection of hidden camera lenses.
• LED Infrared Light: Emits infrared light for camera lens detection.
• Signalindikator: Displays detected signal strength.
• Camera IR Detection Key: Activates infrared scanning mode.
• Signal Detection Function Keys: Controls signal detection modes.
• Switch Key/Sensitivity Adjustment: Power on/off and adjusts detection sensitivity.
• Opladningsport: Type-C-port til opladning af enheden.

2.3 Dimensioner og bærbarhed

The T01 detector is designed for maximum portability, with compact dimensions and a lightweight build.

Figure 3: The T01 detector measures approximately 11.2 cm (4.41 inches) in length.

Figure 4: The compact size allows the T01 to be easily carried in a pocket, making it convenient for travel.

Figure 5: The T01's compact shape allows it to be placed in a bag without occupying significant space, ideal for travel.

2.4 Pakkens indhold

Når du åbner pakken, skal du sørge for, at alle nedenstående varer er til stede:

Figure 6: The T01 Camera Detector, charging cable, and instruction manual included in the package.

• 1x T01 Camera Detector
• 1x USB Type-C ladekabel
• 1x brugermanual

3. Opsætning

3.1 Indledende opladning

Before first use, fully charge the T01 detector. The device is equipped with a 500mAh rechargeable battery.

1. Find Type-C-opladningsporten på enheden (se figur 2).
2. Connect the provided USB Type-C charging cable to the detector.
3. Connect the other end of the USB cable to a compatible power source, such as a computer USB port, a power bank, or a wall adapter (not included).
4. Charging typically takes approximately 2-3 hours for a full charge. The device has input and overcharge protections for safe charging.

A fully charged battery provides up to 10 hours of continuous operation.

4. Betjeningsvejledning

4.1 Power On/Off and Sensitivity Adjustment

1. To power on the device, press and hold the Switch Key/Sensitivity Adjustment button (refer to Figure 2).
2. Once powered on, short press the Switch Key/Sensitivity Adjustment button to cycle through the 6-level sensitivity settings. A higher gear indicates increased sensitivity, allowing for quicker detection of signals.
3. To power off the device, press and hold the Switch Key/Sensitivity Adjustment button again.

4.2 Signal Detection Mode

This mode is used to detect wireless signals emitted by hidden cameras, listening devices, and GPS locators.

1. Sørg for, at enheden er tændt.
2. Extend the Antennae for optimal signal reception.
3. Press the Signal Detection Function Keys to activate signal detection mode.
4. Slowly sweep the detector around the area you wish to inspect. The Signal Indicator will illuminate to show detected signal strength. The stronger the signal, the more indicators will light up.
5. Adjust the sensitivity level as needed. Start with a lower sensitivity in general areas and increase it for more precise localization of a signal source.

Figure 7: The T01 detector identifying signals from a GPS locator, indicating its ability to detect various hidden devices.

4.3 Infrared Light Scanning (Camera Lens Detection)

This mode helps in visually identifying hidden camera lenses, even if they are not actively transmitting signals.

1. Sørg for, at enheden er tændt.
2. Press the Camera IR Detection Key (refer to Figure 2) to activate the LED infrared light.
3. Look through the Lens Identification Lenses (filter window) on the detector.
4. Slowly scan the area, paying close attention to suspicious objects or potential hiding spots (e.g., smoke detectors, wall outlets, mirrors, small holes).
5. If a camera lens is present, it will reflect the infrared light and appear as a bright red dot flashing through the filter window.

Figure 8: The T01 using infrared light scanning and a special filter detection lens to reveal hidden camera lenses as bright red dots.

4.4 Anbefalede brugsscenarier

The T01 detector is suitable for use in various environments where privacy is a concern:

Figure 9: The T01 detector is useful in various settings including conference rooms, hotels, bathrooms, and dressing rooms to ensure privacy.

• Hotels and Rental Properties: Check for hidden cameras in rooms, bathrooms, and common areas.
• Konferencelokaler: Ensure sensitive discussions remain private by scanning for listening devices.
• Dressing Rooms and Public Restrooms: Verify no hidden cameras are present.
• Køretøjer: Detect hidden GPS trackers or listening devices.
• Personal Spaces: Regularly scan your home or office for unauthorized surveillance equipment.

5. Vedligeholdelse

To ensure the longevity and optimal performance of your T01 detector, follow these maintenance guidelines:

• Rensning: Use a soft, dry cloth to wipe the device. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the surface or internal components.
• Opbevaring: Store the detector in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Batteripleje: Hvis enheden ikke skal bruges i en længere periode, skal den oplades med jævne mellemrum (f.eks. hver 3. måned) for at opretholde batteriets sundhedstilstand.
• Håndtering: Avoid dropping the device or subjecting it to strong impacts, which can damage internal circuitry.

6. Fejlfinding

If you encounter issues with your T01 detector, refer to the following common troubleshooting steps:

• Enheden tændes ikke:
  • Ensure the battery is charged. Connect the device to a power source using the Type-C cable and allow it to charge for at least 30 minutes before attempting to power on again.
  • Kontroller, at opladningskablet og strømkilden fungerer korrekt.
• Poor signal detection:
  • Ensure the antennae is fully extended.
  • Increase the sensitivity level of the detector.
  • Move closer to the suspected area.
  • Check for strong electromagnetic interference from other electronic devices nearby, which might affect detection.
• Infrared light scanning not effective:
  • Ensure the LED infrared light is activated.
  • Scan slowly and methodically.
  • Ensure you are looking through the filter window correctly.
  • In very bright environments, detection might be less effective; try to dim the lights if possible.

Hvis problemet fortsætter efter at have prøvet disse trin, bedes du kontakte kundesupport.

7. Specifikationer

8. Garanti og support

For any questions, technical assistance, or warranty inquiries regarding your BANYUP T01 Intelligent Portable Camera Detector, please refer to the contact information provided with your purchase or visit the official BANYUP webwebsted. Gem venligst din købsbevis til garantikrav.

Note: Please allow 1-2cm errors due to manual measurement. Slight color differences may occur due to different display resolutions.