1. Introduktion
This manual provides detailed instructions for the safe and effective use, setup, operation, and maintenance of your SUPRENT PRO Professional Cordless Hair Clippers, Model HC775BX. Designed for precision and durability, these clippers feature a high-torque brushless motor, a detachable DLC-coated blade, and a convenient cordless charging base. Please read this manual thoroughly before first use and retain it for future reference.
2. Pakkens indhold
Carefully unpack your SUPRENT PRO Hair Clipper and verify that all items listed below are included:
- SUPRENT PRO Hair Clipper (Model HC775BX)
- Opladningsbase
- USB opladningskabel
- Set of Limit Combs (various sizes)
- Rengøringsbørste
- Smøreolie
- Brugermanual
3. Opsætning og første brug
3.1 Opladning af klipperen
Before first use, fully charge the hair clipper. Connect the USB charging cable to the charging base and plug the other end into a compatible USB power adapter (not included). Place the clipper onto the charging base. The digital display on the clipper will indicate the charging status. A full charge provides approximately 2500mAh battery capacity for extended cordless operation.
3.2 Montering af styrekamme
Select the desired guide comb for your preferred cutting length. Align the comb with the clipper blade and push it firmly until it clicks into place. Ensure it is securely attached before use.
4. Betjeningsvejledning
4.1 Tænd/sluk
To turn the clipper on, press the power button located on the side of the unit. Press the button again to turn it off. The digital display will show the remaining battery percentage when powered on.
4.2 Justering af bladlængde (konusgreb)
The clipper features an adjustable taper lever on the side, allowing for fine-tuning of the cutting length between 0.6mm and 1.4mm without a guide comb. Move the lever up or down to adjust the blade position. This is useful for blending and creating gradient hairstyles.
4.3 Hårklipningsteknikker
For best results, ensure hair is clean and dry. Start with a longer guide comb and gradually reduce the length as needed. Hold the clipper flat against the head and move it slowly against the direction of hair growth. Overlap strokes to ensure an even cut.
5. Vedligeholdelse
5.1 Rengøring af knivene
After each use, turn off the clipper and remove any attached guide comb. Use the provided cleaning brush to remove loose hairs from the blades. For a more thorough cleaning, the blade head is detachable.
5.2 Detaching and Reattaching the Blade Head
To detach the blade head, ensure the clipper is off. Push the blade head forward firmly until it separates from the clipper body. This integrated design allows for convenient zero-gapping and thorough cleaning. To reattach, align the blade head with the clipper body and push it back until it clicks securely into place.
5.3 Smøring af knivene
Regular oiling of the blades is crucial for maintaining optimal cutting performance and extending the life of your clipper. After cleaning, apply a few drops of the provided lubricating oil to the teeth of the blades. Turn the clipper on for a few seconds to distribute the oil evenly. Wipe off any excess oil.
5.4 Blade Material and Benefits
The clipper features DLC (Diamond-Like Carbon) coated double blades. This coating enhances sharpness and durability, while also helping to reduce blade temperature by approximately 20% during use, minimizing skin irritation.
6. Fejlfinding
- Clipper not turning on or holding charge: Ensure the clipper is properly seated on the charging base and the USB cable is securely connected to a working power source. Allow sufficient time for charging. If the issue persists, contact customer support.
- Clipper pulling hair or cutting unevenly:
- Ensure blades are clean and free of hair debris.
- Apply lubricating oil to the blades as described in the maintenance section.
- Check that the guide comb is securely attached.
- Sørg for, at håret er rent og tørt før klipning.
- Overdreven støj eller vibrationer: Clean and oil the blades. Ensure the blade head is correctly attached. If the problem continues, contact customer support.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | HC775BX |
| Motortype | High Torque Brushless Motor (7000RPM/14000SPM) |
| Bladmateriale | DLC Coated Double Blade |
| Justerbar klingelængde | 0.6 mm - 1.4 mm |
| Batteritype | Lithium-ion |
| Batterikapacitet | 2500mAh |
| Strømforsyningsindgang | DC 5V 1A |
| Opladningstid | 180 minutter (ca.) |
| Køretid | 180 minutter (ca.) |
| Vægt | 2.09 pund (ca.) |
| Dimensioner | 9.06 x 3.94 x 3.9 tommer (pakke) |
8. Sikkerhedsoplysninger
For safe use, please observe the following precautions:
- Keep the appliance away from the face and eyes during operation.
- Undgå at indtage eller indånde små dele.
- Clean the device properly after each use to prevent hair buildup and maintain hygiene.
- Recommended for use by adults or under adult supervision.
- Nedsænk ikke klipperen i vand.
- Opbevares utilgængeligt for børn.
- Do not use if the blades are damaged or bent, as this may cause injury.
9. Garanti og support
For product support, troubleshooting assistance, or warranty inquiries, please contact SUPRENT customer service. Refer to the packaging or the official SUPRENT webwebstedet for kontaktoplysninger. Gem venligst din købsbevis til garantikrav.
Fabrikant: SUPRENT PRO
Sælger: SUPRENT-US DIRECT
Mærkebutik: Visit the SUPRENT Store on Amazon
