ODK Reversible L-Shaped Desk User Manual

1. Introduktion

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your ODK Reversible L-Shaped Desk, Model ZJZ-U-1005. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and safe operation.

2. Sikkerhedsoplysninger

• Exercise caution during assembly to prevent personal injury.
• Ensure all connections are securely fastened and the desk is stable before use.
• Overbelast ikke skrivebordet eller hylderne ud over den angivne vægtkapacitet.
• Keep electrical components (power strip, LED lights) away from liquids.
• Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme.

3. Pakkens indhold

Kontroller, at alle nedenstående komponenter er til stede, før monteringen påbegyndes. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

• Desk Panels (various sizes)
• Metalrammekomponenter (ben, støttestænger)
• Stofskuffer (4 enheder)
• Justerbar skærmstativ
• Integrated Power Strip with 2 AC Outlets and 2 USB Ports
• LED lys Strip
• Samlebeslag (skruer, bolte, unbrakonøgle)
• Instruktionsmanual

4. Monteringsvejledning

Assembly typically requires two people. Follow the numbered steps carefully. The desk features a reversible design, allowing the drawer and shelf sections to be configured on either the left or right side to suit your preference.

4.1. Forberedelse

1. Ryd et rummeligt område til samling.
2. Unpack all components and lay them out, comparing them with the package contents list.
3. Identificér alt hardware, og adskil det for nem adgang.

4.2. Rammesamling

1. Attach the main desk legs to the support bars using the provided screws. Do not fully tighten screws until all components are aligned.
2. Assemble the frame for the side sections (drawer unit and shelf unit). Decide on your preferred left or right configuration at this stage.

4.3. Panel installation

1. Carefully place the main desk panels onto the assembled frame, aligning screw holes. Secure with screws.
2. Attach the side desk panels to their respective frames.

4.4. Drawer and Shelf Installation

1. Insert the fabric drawers into the designated slots in the drawer unit.
2. Install the metal shelves into the shelf unit.

4.5. Monitor Stand, LED, and Power Strip Installation

1. Attach the adjustable monitor stand to the main desk panel. Ensure it is securely fastened.
2. Install the LED light strip along the underside of the monitor stand or main desk as desired. Connect it to a power source.
3. Integrate the power strip into its designated cutout on the desk surface. Connect its power cord to a wall outlet.

4.6. Endelig tilspænding

Once all components are in place and aligned, fully tighten all screws and bolts. Ensure the desk is level and stable.

Figure 1: Desk dimensions and reversible setup diagram. This image illustrates the overall measurements of the desk and how the side units can be swapped for left or right-hand configurations.

Figure 2: Detailed dimensional view of the ODK L-shaped desk, highlighting its reversible design for flexible placement.

5. Betjeningsvejledning

5.1. LED-belysningssystem

The integrated LED light strip offers customizable ambiance for your workspace.

• Tænd/sluk: Use the inline controller or remote (if included) to turn the lights on or off.
• Farvevalg: Choose from 10 distinct colors to match your preference.
• Belysningstilstande: Select from 10 different lighting modes, including static colors, fades, and flashes.
• Hukommelsesfunktion: The LED system retains the last selected color and mode when powered off and on again.

Figure 3: The LED light strip illuminating the desk area with a purple hue, showcasing its customizable lighting feature.

Figure 4: Visual representation of the RGB LED strips, highlighting the 10 available lighting modes and color options.

5.2. Integreret strømskinne

The desk includes a built-in power strip for convenient access to power for your devices.

• AC stikkontakter: Two (2) 220-250V/15A AC outlets are available for powering computers, monitors, and other electronics.
• USB -opladningsporte: To (2) 5V/2.1A USB-porte er til rådighed til opladning af smartphones, tablets og andre USB-drevne enheder.
• Strømledning: The power strip is connected via a 200cm power cord. Ensure it is plugged into a grounded wall outlet.

Figure 5: The integrated power strip with a smartphone connected to a USB port for charging, demonstrating its utility.

5.3. Adjustable Monitor Stand

The monitor stand is designed to provide an ergonomic viewing højde.

• Højdejustering: The monitor stand can be adjusted to different heights to achieve an optimal viewing angle, reducing neck and back strain. Refer to the assembly diagram for specific adjustment points.

6. Vedligeholdelse

• Rensning: Tør skrivebordets overflader af med en blød,amp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler, der kan beskadige overfladen.
• Hardwarekontrol: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er stramme. Spænd dem igen om nødvendigt for at opretholde stabiliteten.
• Elektriske komponenter: Keep the power strip and LED lights free from dust and debris. Do not attempt to disassemble or repair electrical components yourself.

7. Fejlfinding

7.1. Skrivebordsinstabilitet

• Spørgsmål: Desk wobbles or feels unstable.
• Løsning: Check all assembly screws and bolts. Ensure they are fully tightened. Verify that the desk is placed on a level surface.

7.2. LED-lys virker ikke

• Spørgsmål: LED-lysene tænder eller flimrer ikke.
• Løsning: Ensure the LED strip is properly connected to its power source and the power source is plugged into a functional outlet. Check the inline controller for any damage.

7.3. Power Outlets/USB Ports Not Functioning

• Spørgsmål: Devices plugged into the power strip do not receive power.
• Løsning: Verify that the power strip's main cord is securely plugged into a live wall outlet. Test the wall outlet with another device. Ensure devices are correctly inserted into the outlets/ports.

7.4. Skuffer glider ikke jævnt

• Spørgsmål: Fabric drawers are difficult to open or close.
• Løsning: Check for any obstructions inside the drawer slots. Ensure the drawer unit frame is assembled correctly and not warped.

8. Specifikationer

9. Garanti og support

For warranty information, product support, or to report missing/damaged parts, please refer to the warranty card included with your purchase or contact ODK customer service directly. Contact details can typically be found on the ODK official webhjemmeside eller gennem din forhandler.