1. Introduktion
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your SHARP KD-NHA7S7PW21-DE heat pump tumble dryer. Please read these instructions carefully before using the appliance and keep them for future reference.
Figur 1.1: Front view of the SHARP KD-NHA7S7PW21-DE heat pump tumble dryer. This image shows the appliance's overall design, including the control panel, door, and ventilation grille.
2. Sikkerhedsoplysninger
Følg altid grundlæggende sikkerhedsforanstaltninger, når du bruger elektriske apparater, for at mindske risikoen for brand, elektrisk stød og personskade.
- Sørg for, at apparatet er korrekt jordet.
- Do not allow children to play with or operate the dryer.
- Never dry items that have been soiled with flammable substances.
- Clean the lint filter after every cycle.
- Bloker ikke ventilationsåbninger.
- Tag stikket ud af stikkontakten før rengøring eller vedligeholdelse.
3. Opsætning og installation
3.1 Udpakning
Carefully remove all packaging materials. Inspect the dryer for any damage incurred during transit. Report any damage to your retailer immediately.
3.2 Placering
Place the dryer on a firm, level floor. Ensure there is adequate ventilation around the appliance. Do not install the dryer in a room where the temperature is likely to fall below 5°C, as this may affect its performance.
3.3 Elektrisk tilslutning
Connect the dryer to a dedicated 220V power outlet. Do not use extension cords or multiple socket adapters. Ensure the plug is easily accessible after installation.
3.4 Condensate Drainage
This heat pump dryer collects water in a condensate tank. Ensure the tank is correctly seated. For continuous drainage, a drain hose can be connected to a suitable waste pipe (refer to the full installation guide for detailed instructions).
4. Betjeningsvejledning
4.1 Ilægning af vasketøj
Open the dryer door and load laundry into the drum. Do not overload the dryer; ensure clothes can tumble freely. Close the door firmly.
Figur 4.1: The dryer door open, revealing the stainless steel drum. This view is useful for understanding how to load and unload laundry.
4.2 Kontrolpanel overview
The control panel allows you to select programs and adjust settings.
Figur 4.2: Detaljeret view of the digital control panel. It features a display, 'Start/Pause' button, and indicators for functions like anti-crease and drying level.
4.3 Programvalg
Turn the program dial to select the desired drying program based on fabric type and desired dryness level.
Figur 4.3: Close-up of the program selection dial with various drying options such as 'Extra Dry', 'Cupboard Dry', 'Iron Dry', 'Delicates', 'Jeans', and timed programs.
4.4 Start af en cyklus
After selecting a program, press the 'Start/Pause' button to begin the drying cycle. The display will show the remaining time.
4.5 Slut på cyklus
Tørretumbleren signalerer, når programmet er færdigt. Tag vasketøjet ud med det samme for at minimere krølning.asing. Clean the lint filter and empty the condensate tank after each use.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger din tørretumblers levetid.
5.1 Rengøring af fnugfilteret
The lint filter is located inside the door opening. Pull it out and remove any accumulated lint. Rinse under running water if necessary and ensure it is completely dry before reinserting.
5.2 Emptying the Condensate Tank
The condensate tank collects water extracted from the laundry. Empty it after every drying cycle. Pull out the tank, pour out the water, and reinsert it securely.
5.3 Rengøring af kondensatoren
The condenser should be cleaned periodically (e.g., every few months) to maintain drying efficiency. Refer to the full user manual for specific instructions on accessing and cleaning the condenser unit.
5.4 Udvendig rengøring
Tør tørretumblerens yderside af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
6. Fejlfinding
If you encounter problems with your dryer, consult the following table before contacting service.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Tørretumbleren starter ikke | No power supply; Door not closed; Program not selected. | Kontroller strømstik og sikring; Luk døren godt; Vælg et program, og tryk på Start. |
| Tøjet tørrer ikke ordentligt | Lint filter blocked; Condenser dirty; Overloaded; Incorrect program. | Rengør fnugfilter; Rengør kondensator; Reducer vaskemængden; Vælg et passende program. |
| Indikator for fuld vandtank er tændt | Kondensattanken er fuld. | Tøm kondensbeholderen. |
7. Specifikationer
Key technical specifications for the SHARP KD-NHA7S7PW21-DE heat pump tumble dryer.
Figur 7.1: Technical data sheet providing detailed specifications and energy information for the appliance.
| Feature | Værdi |
|---|---|
| Modelnummer | KD-NHA7S7PW21-DE |
| Type | Electric Condenser Heat Pump Tumble Dryer |
| Kapacitet | 7.0 kilo |
| Dimensioner (L x B x H) | 52.5 x 59.6 x 84.5 cm |
| Vægt | 41.4 kilo |
| Støjniveau | 65 decibel |
| Voltage | 220 volt |
| Energieffektivitetsklasse | E |
| Energiforbrug (pr. 100 cyklusser) | 114 kWh |
| Kondenseringseffektivitetsklasse | D |
| Standardprogramvarighed | 2:58 |
| EPREL-databaselink | https://eprel.ec.europa.eu/qr/2245344 |
Figur 7.2: The energy label for the SHARP KD-NHA7S7PW21-DE, indicating its energy efficiency class, consumption, noise level, and capacity.
8. Garanti og support
Your SHARP KD-NHA7S7PW21-DE tumble dryer comes with a manufacturer's warranty. The minimum duration of the guarantee offered by the supplier is 24 months.
For warranty claims, technical support, or spare parts information, please contact SHARP customer service or visit their official webwebsted:
- Kundesupport: https://sharphome.eu/pages/contact
- Spare Parts Information: https://sharphome.eu/pages/contact
Please have your model number (KD-NHA7S7PW21-DE) and purchase date available when contacting support.
