SERBILHOME Indoor/Outdoor Water Fountain User Manual

Indledning

Thank you for choosing the SERBILHOME Indoor/Outdoor Water Fountain. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new water feature. Designed to bring tranquility and a natural aesthetic to your indoor or outdoor space, this fountain features a relaxing water flow and integrated LED lighting.

Please read these instructions thoroughly before assembly and use, and retain this manual for future reference.

Sikkerhedsoplysninger

• Afbryd altid strømforsyningen, før du udfører vedligeholdelse eller rengøring.
• Ensure the fountain is placed on a level, stable surface to prevent tipping.
• Do not allow the pump to run dry, as this can cause damage. Always ensure the water level is sufficient to cover the pump.
• This product is designed for use with clean water only. Do not use other liquids.
• Keep electrical cords away from high-traffic areas and ensure they are not pinched or damaged.
• For outdoor use, ensure the power outlet is a GFCI (Ground Fault Circuit Interrupter) protected outlet.
• Keep children and pets away from the fountain during operation and maintenance.

Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, når du åbner pakken.

Product packaging box, indicating the brand "SerBilHome".

Water pump, essential for water circulation.

Plug for the LED light component.

Main power connection for the fountain system.

• 1 x SERBILHOME Water Fountain Unit
• 1 x Water Pump (with adjustable flow)
• 1 x Plug for LED Light
• 1 x Plug for Water Pump
• 1 x Brugsanvisning (dette dokument)
• 1 x Packet of Decorative Pebbles

Opsætningsinstruktioner

1. Udpak komponenter: Tag forsigtigt alle dele ud af emballagen. Undersøg for eventuelle skader.
2. Vælg placering: Select a level and stable surface for your fountain. Ensure it is near a suitable power outlet. For outdoor use, a GFCI outlet is required.
3. Assemble Pump and Light:
   • Locate the water pump and the LED light assembly.
   • Connect the pump's tubing to the fountain's internal water hose.
   • Place the pump securely in the designated reservoir area at the bottom of the fountain.
   • Ensure the LED light cable is routed correctly and the light is positioned to illuminate the water flow.
4. Fyld med vand: Fill the fountain's reservoir with distilled or clean tap water. Ensure the water level is high enough to completely submerge the pump. Do not overfill.
5. Tilslut strøm: Plug the pump and LED light power cords into their respective plugs. Then, plug the main power cord into a wall outlet.
6. Add Decorative Pebbles: Carefully place the provided decorative pebbles into the fountain's basin som ønsket.

The assembled fountain ready for operation in an outdoor environment.

Proper placement of the fountain on a stable patio surface.

Betjeningsvejledning

• Tænd: Once plugged in, the fountain will begin to operate, and the LED lights will illuminate.
• Juster vandflow: The pump features an adjustable flow rate. Locate the flow control switch on the pump and slide it to increase or decrease the water flow to your preference.
• Daglig drift: The fountain can run continuously. For optimal performance and longevity, ensure the water level is maintained.

Detaljeret view of the water flow and illuminated lower basin.

Water gently cascading from the upper bowl into the main body.

Opretholdelse

• Vandstand: Check the water level daily. Due to evaporation, especially outdoors, water will need to be refilled regularly. Always ensure the pump is fully submerged.
• Rengøring af springvandet:
  • Afbryd strømmen før rengøring.
  • Drain the water from the fountain.
  • Use a soft brush or cloth and mild soap with water to clean the fountain surface. Avoid abrasive cleaners.
  • Skyl grundigt for at fjerne alle sæberester.
• Rengøring af pumpen:
  • Disconnect power and remove the pump from the fountain.
  • Disassemble the pump cover and impeller.
  • Clean any debris, mineral buildup, or algae from the impeller and pump housing using a small brush and clean water.
  • Saml pumpen igen, og sæt den tilbage i fontænen.
• Winterization (for Outdoor Use): Before freezing temperatures, drain all water from the fountain and pump. Clean and dry all components. Store the fountain indoors in a dry, protected area to prevent damage from freezing water.

Fejlfinding

Specifikationer

Visual representation of the fountain's dimensions and weight.

Garanti

SERBILHOME stands behind the quality of its products. This product comes with a long warranty, covering manufacturing defects and functional components. Please note that the warranty typically excludes cosmetic appearance or damage caused by improper use, neglect, or environmental factors such as freezing temperatures if not properly winterized.

For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact SERBILHOME customer support.

Kundesupport

If you have any questions, require assistance with setup or troubleshooting, or need to inquire about warranty service, please contact SERBILHOME customer support. Our team is dedicated to providing prompt and helpful service.

Please have your model number (SH3003-Grey) and purchase information ready when contacting support.

For contact information, please visit the official SERBILHOME webwebstedet eller se emballagen.

Du kan også besøge SERBILHOME Store on Amazon for mere information og supportressourcer.