AMZCHEF Single Dose Coffee Grinder (Model 8306A)

1. Introduktion

Thank you for choosing the AMZCHEF Single Dose Coffee Grinder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee grinder. Please read it thoroughly before first use and retain it for future reference.

2. Vigtige sikkerhedsinstruktioner

• Læs alle instruktioner omhyggeligt, før du bruger apparatet.
• Motorbasen, ledningen eller stikket må ikke nedsænkes i vand eller andre væsker.
• Tag stikket ud af stikkontakten, når den ikke er i brug, før du samler eller adskiller dele, og før du rengør den.
• Undgå kontakt med bevægelige dele.
• Brug ikke noget apparat med en beskadiget ledning eller stik, eller efter at apparatet ikke fungerer korrekt eller er blevet tabt eller beskadiget på nogen måde.
• Brug af tilbehør, der ikke anbefales eller sælges af producenten, kan forårsage brand, elektrisk stød eller personskade.
• Må ikke bruges udendørs.
• Lad ikke ledningen hænge ud over kanten af ​​et bord eller bord, eller rør ved varme overflader.
• Ensure the hopper lid is securely in place before operating the grinder.
• Dette apparat er kun til husholdningsbrug.

3. Pakkens indhold

• AMZCHEF Single Dose Coffee Grinder (Model 8306A)
• Vacuum-Sealed Dosing Cup (120g capacity)
• Dosing Funnel Stands (58mm & 51/54mm)
• Magnetic Knock Tool
• Rengøringsbørste
• Instruktionsmanual

4. Produktet er slutview

Familiarize yourself with the components of your AMZCHEF coffee grinder:

• Bønnetragt: Holder hele kaffebønner.
• Hopper Lid with Bellows: Seals the hopper and allows for air blowing to clear residual grounds.
• Grind Adjustment Dial: Selects from 75 precise grind settings.
• Start/Annuller knap: Initiates or stops the grinding process.
• Timerknap: Sets the grinding duration from 5 to 60 seconds.
• Magnetic Spout: Detachable for easy cleaning and low retention.
• Portafilterholder: Accommodates 51/54mm and 58mm portafilters.
• Vacuum Dosing Cup: For collecting ground coffee and preserving freshness.
• LED lys: Illuminates the grinding area for better visibility.

5. Opsætning

5.1 Udpakning og montering

1. Fjern forsigtigt alle komponenter fra emballagen.
2. Wash the bean hopper, hopper lid, magnetic spout, and dosing cup with warm, soapy water. Rinse thoroughly and dry completely.
3. Place the grinder base on a stable, flat, and dry surface.
4. Insert the magnetic spout into its designated slot on the grinder. Ensure it clicks securely into place.
5. Attach the bean hopper to the top of the grinder by aligning the arrows and twisting until it locks.
6. Place the hopper lid with bellows onto the bean hopper.

5.2 Indledende rengøring

Before first use, it is recommended to run a small amount of old coffee beans through the grinder to season the burrs and remove any manufacturing residue. Discard these initial grounds.

6. Betjeningsvejledning

6.1 Justering af kværningsindstillinger

The AMZCHEF grinder offers 75 precise grind settings, allowing you to achieve the ideal consistency for various brewing methods. Rotate the grind adjustment dial located on the top of the grinder to select your desired setting. Finer settings are for espresso, while coarser settings are for French press or pour-over.

6.2 Påfyldning af kaffebønner

Open the hopper lid and pour your desired amount of whole coffee beans into the bean hopper. Replace the lid securely.

6.3 Maling af kaffe

1. Select your desired grind setting using the adjustment dial.
2. Place your portafilter (with the appropriate stand) or the vacuum dosing cup under the magnetic spout.
3. Set the desired grinding time using the timer knob (5-60 seconds).
4. Press the Start/Cancel button to begin grinding. The integrated LED light will illuminate the grinding area.
5. The grinder will automatically stop after the set time. If you need to stop it sooner, press the Start/Cancel button again.

6.4 Using the Vacuum Dosing Cup

The included vacuum-sealed dosing cup helps maintain the freshness of your ground coffee. After grinding into the cup, press down on the lid to create a vacuum seal. This is ideal for storing grounds or for outdoor brewing.

6.5 Anti-Static Technology and Low Retention

The grinder incorporates anti-static technology to prevent coffee grounds from clumping and spraying. The magnetic spout design contributes to ultra-low retention (0.1-0.2g), ensuring you get almost all the coffee you put in. For near-zero retention, use the included knock tool and the bellows on the hopper lid after grinding.

6.6 Officiel produktvideo

Watch this video for a demonstration of the AMZCHEF Single Dose Coffee Grinder in action:

7. Vedligeholdelse

7.1 Daglig rengøring

1. Tag kværnen ud af stikkontakten.
2. Remove the bean hopper and empty any remaining beans.
3. Remove the magnetic spout and clean it with the provided brush or a damp klæde.
4. Use the cleaning brush to remove any residual coffee grounds from the grinding chamber and burrs.
5. Tør ydersiden af ​​kværnen af ​​med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke enheden i vand.

7.2 Deep Cleaning (Monthly or as needed)

1. Tag kværnen ud.
2. Remove the bean hopper and the upper burr. Refer to the product diagram for burr removal instructions.
3. Thoroughly clean both the upper and lower burrs with the cleaning brush. Ensure no coffee oils or grounds remain.
4. Clean the grinding chamber thoroughly.
5. Reassemble the burrs and hopper, ensuring all parts are securely in place.

Note: The burrs are made of 40mm SUS420 stainless steel for durability and consistent grinding. Proper cleaning ensures their longevity and optimal performance.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official AMZCHEF webwebstedet. Behold din købskvittering som købsbevis.