1. Introduktion
This manual provides essential information for the proper installation, operation, and maintenance of your Deaf Bonce Apocalypse AP-ASA-1500.2 2-Channel Full Range AmpLæs venligst denne manual grundigt, før du forsøger at installere eller betjene amplifier to ensure optimal performance and safety. This amplifier is designed to deliver high-quality audio output for car audio systems, featuring robust power delivery and versatile sound customization options.
2. Sikkerhedsoplysninger
- Frakobl altid bilens negative batteripol, inden du påbegynder elektrisk arbejde.
- Sørg for, at alle ledninger er korrekt isoleret for at forhindre kortslutninger.
- Monter amplifier securely in a dry, well-ventilated area, away from direct sunlight or heat sources.
- Use appropriate gauge power and ground wires as specified in the installation section.
- Udsæt ikke amplifner til fugt eller ekstreme temperaturer.
- Hvis du er usikker på installationstrinnene, skal du kontakte en professionel installatør af bilstereo.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 1x Apocalypse ASA-1500.2 2-Channel Amplivligere
Image 3.1: Contents of the Deaf Bonce Apocalypse AP-ASA-1500.2 package, showing the amplifier unit and the remote control with its cable.
4. Opsætning og installation
4.1. Montering af Amplivligere
Choose a mounting location that is dry, well-ventilated, and secure. Ensure there is sufficient airflow around the amplifier's heatsink. Use the provided mounting hardware to firmly attach the ampløfteren til en fast overflade i dit køretøj.
4.2. Ledningsforbindelser
Refer to the diagram below for proper wiring of power, ground, remote turn-on, input signals, and speaker outputs. Always use appropriate gauge wiring to prevent overheating and ensure stable power delivery.
Billede 4.1: Detaljeret view of the input and output terminals on the Deaf Bonce Apocalypse AP-ASA-1500.2 amplifier, including power, ground, remote, RCA inputs, and speaker outputs.
- Strømindgang (12V): Connect to the positive terminal of the vehicle's battery via a fuse holder (not included) located within 18 inches of the battery. Use 0 Ga wire.
- Jord (GND): Connect to a clean, bare metal point on the vehicle chassis. Use 0 Ga wire, ensuring a secure connection.
- Fjernbetjening (REM): Tilslut til fjernbetjeningens tændingsudgang på din hovedenhed.
- RCA Inputs (CH1, CH2): Connect to the RCA pre-outs of your head unit or signal processor.
- Speaker Outputs (CH1, CH2): Connect your speakers or subwoofers to these terminals. Ensure correct polarity. Use 8 Ga wire.
5. Betjeningsvejledning
5.1. Initial Power-Up and Basic Settings
After completing all wiring, reconnect the vehicle battery. Turn on your head unit. The amplifier's power indicator should illuminate. Begin with all gain controls at minimum and crossover filters set to a neutral position (e.g., full range if available, or a moderate frequency).
5.2. Adjusting Gain and Crossover Filters
De amplifier features independent gain controls for each channel, along with Low Pass Filter (LPF) and High Pass Filter (HPF) adjustments. The LPF and HPF can operate simultaneously for precise sound shaping.
Image 5.1: The remote control unit for the Deaf Bonce Apocalypse AP-ASA-1500.2 amplifier, featuring a voltage display, power indicator, and a gain adjustment knob.
- Gain Control: Adjust the gain to match the output voltage of your head unit. Start low and slowly increase until you hear distortion, then back off slightly. The remote control allows for convenient adjustment of the overall output level.
- Lavpasfilter (LPF): Used for subwoofers or mid-bass speakers. It allows frequencies below the set point to pass through. Adjustable from 50-1200 Hz or 500-12000 Hz.
- Højpasfilter (HPF): Used for full-range or high-frequency speakers. It allows frequencies above the set point to pass through. Adjustable from 10-1200 Hz or 100-12000 Hz.
- Brotilstand: For increased power output to a single speaker or subwoofer, the amplifier can be bridged. Refer to the specifications for bridge mode power ratings and minimum impedance.
6. Vedligeholdelse
The Deaf Bonce Apocalypse AP-ASA-1500.2 amplifier requires minimal maintenance. Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Keep the amplifier's heatsink fins clean and free of dust or debris to maintain proper cooling. Use a soft, dry cloth to clean the exterior of the ampBrug ikke skrappe kemikalier eller slibende rengøringsmidler.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ampkøleren tænder ikke | Ingen strøm, jord eller fjernsignal; Sprunget sikring | Check all power, ground, and remote connections. Verify fuse integrity and replace if necessary. |
| Ingen lydudgang | Intet indgangssignal; Højttalerledninger frakoblet; AmpLifier i beskyttelsestilstand | Check RCA input connections. Verify speaker wire connections and polarity. Check for short circuits in speaker wiring. |
| Forvrænget lyd | Gain set too high; Improper crossover settings; Speaker impedance mismatch | Reduce gain level. Adjust LPF/HPF settings. Ensure speaker impedance is within amplifiers understøttede område. |
| Ampkøleren overophedes | Utilstrækkelig ventilation; Lavimpedansbelastning; Langvarig høj effekt | Sørg for korrekt luftgennemstrømning omkring amplifier. Verify speaker impedance. Reduce volume or allow ampvarmebeholder til afkøling. |
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Model | ASA-1500.2 |
| Klasse | D |
| Antal kanaler | 2 |
| Frekvensrespons | 10-20000 Hz |
| 1 Ohm RMS Power (14.4 V) | 1500W x 2 |
| 2 Ohm RMS Power (14.4 V) | 890W x 2 |
| 4 Ohm RMS Power (14.4 V) | 550W x 2 |
| 2 Ohm RMS Power (Bridge) | 3020W x 1 |
| 4 Ohm RMS Power (Bridge) | 1780W x 1 |
| Minimum Permissible Load (Channel) | 1 Ohm |
| Minimum Permissible Load (Bridge) | 2 Ohm |
| LPF and HPF Simultaneous Operation | Ja |
| Lavpasfilter | 50-1200 Hz / 500-12000 Hz |
| Højpasfilter | 10-1200 Hz / 100-12000 Hz |
| Crossover hældning | 12 dB/okt |
| Input Terminal | 0 Ga |
| Outputterminal | 8 Ga |
| Working Voltage | 9-15V |
| Signal-støjforhold | > 91 dB |
| Dimensioner (LxBxH) | 15 x 9.4 x 2.5 tommer |
9. Garantioplysninger
Deaf Bonce products are manufactured to high-quality standards. This amplifier is covered by a limited warranty against defects in materials and workmanship under normal use. The duration and terms of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims. Unauthorized modifications or improper installation will void the warranty. For specific warranty details, please refer to the documentation provided with your purchase or contact Deaf Bonce customer support.
10. Support
For technical assistance, troubleshooting, or further information regarding your Deaf Bonce Apocalypse AP-ASA-1500.2 amplifier, please visit the official Deaf Bonce website or contact their authorized customer support. You can also visit the Deaf Bonce Store on Amazon for produktinformation og ressourcer.
