Indledning
Tak for købetasing the SENCOR SWS 5400 Weather Station. This device provides comprehensive weather information including indoor and outdoor temperature, humidity, and a weather forecast. It also features a projection clock and alarm functions. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.
Pakkens indhold
- SENCOR SWS 5400 Main Unit
- 1x trådløs fjernbetjeningssensor
- Power Adapter (DC 4.5V / 150mA)
- Instruktionsmanual
Note: 2x AA batteries for the main unit and 2x AAA batteries for the sensor are not included.
Produkt overview

Billede 1: SENCOR SWS 5400 Main Unit (left) displaying weather information, time, and indoor/outdoor temperatures. The wireless remote sensor (right) shows the outdoor temperature.

Billede 2: The SENCOR SWS 5400 Main Unit demonstrating its projection feature, displaying the outdoor temperature onto a surface. The remote sensor is also visible.

Billede 3: Nærbillede view of the SENCOR SWS 5400 wireless remote sensor, showing its display and 433 MHz transmission indicator.
Opsætning
- Powering the Main Unit:
- Insert 2x 1.5V AA batteries (not included) into the main unit's battery compartment.
- Connect the provided power adapter to the main unit and plug it into a power outlet. The display will light up.
- Powering the Remote Sensor:
- Insert 2x 1.5V AAA batteries (not included) into the remote sensor's battery compartment.
- Place the remote sensor outdoors in a sheltered location, away from direct sunlight and rain, to ensure accurate readings. The transmission range is up to 70 meters in open areas.
- Sensorparring:
- The main unit will automatically attempt to connect with the remote sensor. This may take a few minutes.
- Once connected, the outdoor temperature and humidity will be displayed on the main unit.
- Initial Time and Date Setting:
- The unit features a radio-controlled clock (DCF77 signal). It will automatically synchronize the time and date. This process can take several hours, especially during initial setup.
- Manual time setting is also possible if the DCF77 signal is not available or desired. Refer to the "Operating Instructions" section for manual setting.
Betjeningsvejledning
Displayfunktioner:
- Vejrudsigt: Displays icons for sunny, partially cloudy, cloudy, rainy, or snowy conditions.
- Indendørs temperatur og luftfugtighed: Shows current readings for the main unit's location.
- Udendørs temperatur: Displays readings from the wireless remote sensor.
- Barometric Trend Indicator: Indicates rising, stable, or falling atmospheric pressure.
- Time, Date, Day of Week: Digital display with day of the week in 10 languages (EN, DE, FR, ES, IT, NL, DA, RU, CZ, NO).
- Max/Min Memory: Records maximum and minimum temperature/humidity readings over a 24-hour period.
Knap funktioner:
- MODE / SET: Used to switch display modes and enter setting menus.
- MAX / MIN: View maximum and minimum recorded values.
- DIMMER: Adjust display brightness (Hi / Lo / Off).
- ALARM: Set and activate the alarm function.
- SNOOZE / LIGHT: Activates snooze during an alarm; temporarily illuminates the display.
Setting Time and Date Manually:
- Tryk og hold på MODE / SET knappen for at gå ind i tidsindstillingstilstand.
- Brug MAX / MIN knapper til at justere værdier.
- Trykke MODE / SET again to confirm and move to the next setting (e.g., 12/24 hour format, hour, minute, year, month, day, day of week language).
- Afslut indstillingstilstand ved at trykke på MODE / SET repeatedly or waiting for automatic exit.
Alarm funktion:
- Tryk på ALARM knap til view alarmtidspunktet.
- Tryk og hold ALARM for at gå ind i alarmindstillingstilstand.
- Bruge MAX / MIN for at justere time og minut.
- Trykke ALARM for at bekræfte.
- For at aktivere/deaktivere alarmen skal du trykke på ALARM Tryk kortvarigt på knappen, når den ikke er i indstillingstilstand. Et alarmikon vil vises/forsvinde på displayet.
- Tryk på, når alarmen lyder SNOOZE / LYS for snooze function. Press any other button to stop the alarm for 24 hours.
Projektionsfunktion:
- The projector can display weather forecasts with time or temperature.
- Use the projection rotation function to adjust the display orientation.
- The projection brightness is optimized for low-light conditions.

Billede 4: The SENCOR SWS 5400 Weather Station projecting outdoor temperature and weather icon onto a wall in a bedroom setting.

Billede 5: The SENCOR SWS 5400 Weather Station projecting the current time and a weather icon onto a surface, demonstrating the projection feature's clarity.
Opretholdelse
- Rensning: Tør hovedenheden og sensoren af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Udskiftning af batteri: Replace batteries in both the main unit and remote sensor when the low battery indicator appears on the display. Ensure correct polarity.
- Placering: Avoid placing the main unit in direct sunlight, near heat sources, or in areas with high vibration. Ensure the remote sensor is protected from direct weather elements.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen visning på hovedenheden | Ingen strøm eller flade batterier. | Check power adapter connection. Replace AA batteries in the main unit. |
| Outdoor temperature not displayed | Sensor not paired or flat batteries in sensor. | Replace AAA batteries in the remote sensor. Ensure sensor is within range (max 70m open area). Re-pair if necessary (refer to setup section). |
| Forkert tidsvisning | DCF77 signal not received or manual setting error. | Ensure unit is placed away from interference. Allow time for DCF77 synchronization. Manually set time if signal is consistently poor. |
| Projection is dim or unclear | Ambient light too bright or projection focus/rotation needs adjustment. | Use in darker environments for best visibility. Adjust projection rotation. |
Specifikationer
- Vejrudsigt: Sunny, Partially Cloudy, Cloudy, Rainy, Snowy
- Indendørs temperaturområde: -10°C til +50°C
- Udendørs temperaturområde: -20°C til +50°C
- Indendørs luftfugtighedsområde: 20% til 99% RH
- Temperaturvisning: °C / °F selectable
- Skærmens lysstyrke: 3 levels (Hi / Lo / Off)
- Tidsformat: 12 / 24 hours selectable
- Day of Week Languages: EN, DE, FR, ES, IT, NL, DA, RU, CZ, NO
- Ur: Radio-controlled by DCF77 signal (manual setting possible)
- Fremskrivning: Weather forecast with time or temperature, rotation function
- Wireless Sensor Transmission: Up to 70m (open area), 433 MHz frequency
- Hovedenhedens strøm: 2x 1.5V AA batteries (not included), DC 4.5V / 150mA power adapter (included)
- Sensoreffekt: 2x 1.5V AAA-batterier (medfølger ikke)
- Main Unit Dimensions (W x H x D): 141 x 92 x 51 mm
- Hovedenhedens vægt: 173 g
- Materiale: Plast
- Farve: Sort
Garanti og support
SENCOR products are designed and manufactured to the highest quality standards. This product comes with a manufacturer's warranty as per local regulations. For warranty claims or technical support, please contact your local SENCOR distributor or retailer where the product was purchased. Please retain your proof of purchase for warranty purposes.
Reservedeles tilgængelighed: 5 år.





