ACEZUK Portable Car Jump Starter with Air Compressor User Manual

Indledning

This manual provides detailed instructions for the safe and effective operation and maintenance of your ACEZUK Portable Car Jump Starter with Air Compressor. This versatile device combines a powerful jump starter for 12V vehicles (up to All Gas/10.0L Diesel engines) with a 150PSI air compressor, a portable power bank, and an LED flashlight. Please read this manual thoroughly before first use and keep it for future reference.

Image: The ACEZUK Portable Car Jump Starter, showing the main unit, smart jumper cables, air hose, various nozzles, USB-C charging cable, and carrying case.

Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden og køretøjet:

• Do not allow the smart clamps to touch each other when connected to the jump starter.
• Sørg for korrekt polaritetstilslutning (rød ledning)amp til positiv, sort klamp to negative) to avoid damage.
• Start ikke med et frossent batteri.
• Immediately remove the smart clamps from the car battery after a successful jump start.
• Do not operate the air compressor continuously for extended periods. Allow it to cool down if it becomes hot.
• Hold enheden væk fra børn.
• Opbevares køligt og tørt, væk fra direkte sollys og høje temperaturer.
• Recharge the device every 2-3 months to maintain battery health, even if not in use.

The device incorporates 10 intelligent safety protections:

• ✓ Over Current Protection
• ✓ Over Temperature Protection
• ✓ Over Charge Protection
• ✓ Over Discharge Protection
• ✓ Over Voltage Beskyttelse
• ✓ Short Circuit Protection
• ✓ Reverse Polarity Protection
• ✓ Spark Proof
• ✓ Anti-Interference Protection
• ✓ Low Temperature Protection

Image: Visual representation of the 10 safety protections integrated into the jump starter, including over current, over temperature, and reverse polarity protection.

Pakkens indhold og komponenter

Bekræft at alle varer er til stede i pakken:

• 1 x ACEZUK Jump Starter with Air Compressor
• 1 x Smart Jumper kabler
• 1 x Air Pump Hose
• 4 x Gas Nozzles (for various inflatables)
• 1 x USB-C opladningskabel
• 1 x brugermanual
• 1 x Portable EVA Carrying Case

Image: Detailed diagram highlighting the various components and controls of the ACEZUK jump starter, including the LED light, LCD display, EC5 port, USB ports, and control buttons.

Nøglekomponenter:

• Stort LCD-display: Shows battery level, inflation pressure, operational status, and error codes.
• EC5-port: Til tilslutning af de smarte jumperkabler.
• USB Output Ports (USB1, USB2): For charging external electronic devices.
• Type-C indgangs-/udgangsport: For charging the jump starter and charging external devices.
• Air-filled Hole: For connecting the air pump hose.
• LED lys: Multi-mode flashlight (Bright, Strobe, SOS).
• Kontrolknapper: Mode button, OK button, +/- buttons, Light button, Power button.

Opsætning

Before first use, fully charge the ACEZUK jump starter. Although it may show some charge upon arrival, a full charge ensures optimal performance and battery longevity.

• Connect the provided USB-C charging cable to the Type-C port on the jump starter.
• Connect the other end of the USB-C cable to a 5V/2A (or higher) USB adapter (not included).
• The LCD display will indicate charging status. Charge until the battery indicator shows full.

It is recommended to charge the jump starter every 2-3 months to activate the battery and prolong its lifespan, especially if it has not been used for an extended period.

Betjeningsvejledning

Sådan springer du i gang din bil

Ensure the jump starter has at least 25% charge before attempting to jump start a vehicle.

1. Insert the jump cable: Connect the smart jumper cable plug firmly into the EC5 port on the jump starter.
2. Tilslut clamps: Fastgør den røde (+) clamp to the positive terminal of the car battery and the black (-) clamp til den negative terminal. Sørg for en sikker forbindelse.
3. Start your car engine: Når clamps are correctly connected and the smart cable indicator is green, start your car's engine.
4. Fjern clamps: Immediately remove the smart clamps from the car battery once the engine has started. Then, disconnect the smart cable from the jump starter.

Image: Step-by-step visual guide demonstrating how to connect the jump starter to a car battery and start the engine.

Note: Please immediately remove the smart clamps after starting the car to prevent damage to the device.

Brug af luftkompressoren

The integrated air compressor can inflate tires for cars, motorcycles, bikes, and various balls.

1. Assemble the tube: Screw the air pump hose onto the air-filled hole on the jump starter.
2. Connect the tube to the tire: Securely attach the other end of the hose to the tire valve.
3. Adjust inflation amount: Use the "M" button to select the desired mode (car, motorcycle, bike, ball). Use the "+" and "-" buttons to set the target PSI/BAR/KPA.
4. Tryk på tænd/sluk-knappen: Press the power button to start inflation. The compressor will automatically stop when the preset pressure is reached.

Image: A combined visual guide showing the steps for both jump starting a car and inflating a tire with the device.

Note: Do not use the air pump function continuously for more than 10 minutes. If the compressor gets seriously hot, allow it to cool down for a few minutes before continuing.

Powerbankens funktionalitet

The jump starter can also serve as a portable power bank to charge your electronic devices.

• Connect your device's USB charging cable to either the USB1, USB2, or Type-C output port on the jump starter.
• Jumpstarteren vil automatisk begynde at oplade din enhed.

Image: The ACEZUK jump starter connected to and charging various electronic devices such as phones, tablets, and smartwatches, demonstrating its power bank capability.

Betjening af lommelygte

The built-in LED flashlight offers multiple lighting modes for various situations.

• Press the Light button once to turn on the Lyse mode.
• Press the Light button again to switch to Strobe mode.
• Press the Light button a third time to activate SOS mode.
• Press the Light button a fourth time to turn off the flashlight.

Image: The ACEZUK jump starter with its powerful 400 lumen LED light active, illustrating the bright, strobe, and SOS lighting modes.

Opretholdelse

Proper maintenance ensures the longevity and reliability of your ACEZUK jump starter:

• Almindelig opladning: Recharge the device every 2-3 months, even if not in use, to prevent deep discharge and maintain battery health.
• Opbevaring: Opbevar enheden et køligt, tørt sted, væk fra direkte sollys, fugt og ekstreme temperaturer.
• Rensning: Tør enheden af ​​med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Kabelpleje: Undersøg startkabler og koblingeramps for any damage before each use. Replace if frayed or damaged.

Fejlfinding

Hvis du støder på problemer, kan du se følgende almindelige problemer og løsninger:

For issues not covered here, please contact ACEZUK customer support.

Specifikationer

Image: The ACEZUK jump starter displayed with indicators for its wide operating temperature range, from -4°F (-20°C) to 140°F (60°C).

Garanti og support

ACEZUK offers comprehensive support for your product:

• Garanti: 2-YEAR FREE Warranty.
• Teknisk support: Livstids teknisk support.
• Kundeservice: 7/24 Customer Service available.

For any inquiries, technical assistance, or warranty claims, please contact ACEZUK customer service through the contact information provided on the product packaging or the official ACEZUK webwebsted.