1. Produktet er slutview
The EPEVER MT52 is a remote control unit designed for monitoring and setting parameters of EPEVER MPPT solar charge controllers. It provides real-time system data, error alarms, and status information through a clear LCD display, enhancing user control and system management.
1.1 Nøglefunktioner
- Kompatibilitet: Compatible with EPEVER controllers featuring an RS485 interface.
- Batteristøtte: Suitable for Gel, AGM, lead-acid, and lithium batteries.
- Vise: Large multi-function LCD for real-time data, error alarms, and status.
- Brugergrænseflade: Simple navigation via 6 function keys.
- Strømforsyning: Directly powered via RJ45 communication cable from the controller; no external power required.
- Fjernbetjening: Enables remote load switching and parameter adjustment.
2. Sikkerhedsinstruktioner
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the unit, the controller, or other components, and may void the warranty.
- Ensure the MT52 is connected only to compatible EPEVER solar charge controllers.
- Avoid exposing the unit to direct sunlight, high temperatures, or high humidity.
- Do not disassemble or attempt to repair the MT52 unit. Contact qualified personnel for service.
- Hold enheden væk fra vand og andre væsker.
- Sørg for korrekt ventilation omkring enheden.
3. Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- EPEVER MT52 Remote Control Unit
- Communication Cable (RJ45, approximately 2 meters)
- Monteringsskruer (4 stk.)
- Rubber Feet (4 pieces)
Image 3.1: EPEVER MT52 Remote Control Unit with included communication cable, mounting screws, and rubber feet.
4. Opsætning og installation
4.1 Mounting the MT52
The MT52 unit can be surface-mounted using the provided screws. Choose a location that is easily accessible for viewing and operation, and away from direct sunlight or heat sources.
4.2 Ledningsforbindelse
The MT52 connects to your EPEVER solar charge controller via the supplied RJ45 communication cable. Locate the RS485 communication port on your charge controller and the corresponding port on the back of the MT52 unit. Insert the RJ45 connectors firmly into both ports.
The MT52 draws its power directly from the charge controller through this communication cable, eliminating the need for an external power supply.
Billede 4.1: Bagside view of the MT52 unit, highlighting the RJ45 communication port for connection to the solar charge controller.
Image 4.2: Illustrative diagram demonstrating the connection of the MT52 remote control unit to an EPEVER solar charge controller within a typical solar power system setup, including solar panel, battery, and load.
5. Betjeningsvejledning
Once connected, the MT52 will power on automatically and display the current system status. The unit features an LCD screen and six function buttons for navigation and parameter adjustment.
5.1 Skærmgrænseflade
The LCD displays various parameters such as battery voltage, charging current, load current, and system status icons (e.g., solar charging, battery status, load status). Error alarms will also be indicated on the display.
Billede 5.1: Forside view of the MT52 display, showing real-time system parameters such as solar input, battery voltage, and load status.
5.2 Knapfunktioner
- ESC: Afslutter den aktuelle menu eller vender tilbage til den forrige skærm.
- Pil op/ned: Navigerer gennem menupunkter eller justerer parameterværdier.
- Venstre/højre pile: Moves between different display screens or menu items.
- OK: Bekræfter et valg eller går ind i en menu.
5.3 Navigation and Parameter Setting
Use the arrow keys to navigate through the various display screens to view different system parameters. To enter the settings menu, typically press and hold the 'OK' button or navigate to a specific settings icon and press 'OK'. Within the settings menu, use the arrow keys to select parameters and adjust their values. Confirm changes with the 'OK' button and exit with 'ESC'.
Image 5.2: Close-up of the MT52 display and its six function buttons, used for navigating menus and adjusting settings.
6. Tekniske specifikationer
- Eget forbrug:
- Backlight active: < 23mA
- Backlight inactive: < 15mA
- Kommunikationsport: RJ45
- Kommunikationskabellængde: 2 meter
- Omgivelsestemperatur: -20°C til +70°C
- Dimensioner (L x B x H): 11.4 cm x 11.4 cm x 3.3 cm
- Vægt: 0.23 kg
- Materiale: Plast
- Skærmtype: LCD
Image 6.1: Illustration of the physical dimensions and weight of the EPEVER MT52 unit, indicating its compact form factor.
7. Fejlfinding
If you encounter issues with your MT52 unit, consider the following:
- Ingen skærm/strøm: Ensure the RJ45 communication cable is securely connected to both the MT52 and the solar charge controller. Verify that the solar charge controller is powered on and functioning correctly.
- Forkerte aflæsninger: Confirm that the MT52 is connected to a compatible EPEVER controller. Check the controller's own display for comparison.
- Knapper reagerer ikke: Try disconnecting and reconnecting the MT52. If the issue persists, contact support.
- Kommunikationsfejl: Check the RJ45 cable for damage. Ensure the controller's firmware is up to date if applicable.
For more detailed troubleshooting, refer to the instruction manual of your specific EPEVER solar charge controller.
8. Vedligeholdelse
The EPEVER MT52 remote control unit requires minimal maintenance:
- Keep the unit clean and free from dust using a soft, dry cloth.
- Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
- Ensure the communication cable connections remain secure.
- Periodically check for any physical damage to the unit or cable.
9. Garanti og support
The EPEVER MT52 Remote Control Unit comes with a 2 års producentgaranti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.
For warranty claims, technical support, or any questions regarding the operation of your MT52 unit, please contact your retailer or EPEVER customer service directly. Please have your purchase receipt and product model number available when contacting support.
Certificeringer: CE-certificeret.
