1. Introduktion
This manual provides detailed instructions for the CYCPLUS AS2 Bike Pump and M1 GPS Bike Computer. This package includes both devices, designed to enhance your cycling experience with efficient tire inflation and comprehensive ride data tracking.
Figure 1: CYCPLUS AS2 Bike Pump and M1 GPS Bike Computer.
The AS2 pump is a compact and portable solution for bicycle tire inflation, featuring quick charging and compatibility with both Schrader and Presta valves. The M1 GPS Bike Computer offers dynamic GPS positioning, ANT+ sensor synchronization, and app integration for detailed workout data analysis.
2. Pakkens indhold
The CYCPLUS AS2 Bike Pump and M1 GPS Bike Computer package includes the following items:
- CYCPLUS AS2 Bike Pump (1 unit)
- CYCPLUS M1 GPS-cykelcomputer (1 enhed)
- USB-C Charging Cable (for pump and computer)
- Schrader/Presta Valve Adapters (for pump)
- Basketball/Football/Soccer Ball Valve Needle (for pump)
- Bike Computer Mount (for M1)
- Cadence Sensor (for M1)
- Speed Sensor (for M1)
3. Opsætningsvejledning
3.1. CYCPLUS AS2 Bike Pump Initial Setup
Before first use, fully charge the AS2 Bike Pump. The pump features fast charging, typically reaching full capacity within approximately 3 hours.
Figure 2: Charging the AS2 Bike Pump. A full charge provides up to 60 hours of endurance.
3.2. CYCPLUS M1 GPS Bike Computer Initial Setup
The M1 Bike Computer comes with a pre-installed battery. For initial setup or battery replacement, carefully open the battery compartment. The device uses a standard CR2032 coin cell battery.
Mount the M1 computer to your bicycle handlebars using the provided mount. The mount is designed for easy installation and secure attachment.
Install the cadence and speed sensors as per the instructions provided with the sensors. These sensors are crucial for accurate data collection during your rides.
Figure 3: M1 GPS Bike Computer with fast and accurate positioning capabilities.
Download the "XOSS" app from the Google Play Store or Apple App Store to synchronize your M1 data. The app allows for data analysis and can sync your journey to Strava.
Figure 4: CYCPLUS Fit App for data synchronization and analysis.
4. Betjening
4.1. CYCPLUS AS2 Bike Pump Operation
The AS2 pump is designed for ease of use. To activate the pump, double-click the power button. The digital display will show the current pressure.
Figure 5: The AS2 pump is ultra-light and portable, weighing only 97g.
Connect the pump to your tire valve. The pump is compatible with both Schrader and Presta valves. For quick top-offs, you can directly push the pump onto the valve. For full inflation or higher pressures, it is recommended to use the screw-on valve adapter to ensure a secure connection and prevent heat transfer to your hands.
The pump can achieve a maximum air pressure of 100 PSI and a wind speed of 5L/min, allowing for rapid inflation. For example, it can reach 80 PSI in approximately 80 seconds.
Figure 6: The AS2 pump offers fast inflation, reaching 80 PSI in just 80 seconds.
The pump is a reusable alternative to CO2 inflators, capable of inflating over 200 tires on a single charge with less than 10% speed degradation over time. This also helps preserve tire sealant, as pure air is less likely to dry it out compared to CO2.
Figure 7: The AS2 pump is a reusable alternative to CO2 inflators, supporting over 200 tires.
4.2. CYCPLUS M1 GPS Bike Computer Operation
The M1 computer utilizes dynamic GPS positioning for high sensitivity, accuracy, and fast positioning (within 30 seconds). It supports GPS, Glonass, Galileo, and BeiDou satellite systems.
It supports simultaneous recording of various data including speed, cadence, heart rate, power, route traveled, and altitude. Data can be synchronized to the XOSS app via Bluetooth and further uploaded to Strava for comprehensive workout analysis.
The M1 features auto backlight and auto awakening. The anti-glare LCD screen ensures clear visibility even in direct sunlight. The backlight automatically turns on between 18:00 and 9:00 the next day. The device will enter hibernation after 10 minutes of no displacement or vibration and will wake up upon movement.
Figure 8: M1 GPS Bike Computer with auto backlight and auto awakening features.
5. Vedligeholdelse
- Rensning: Wipe both the pump and computer with a soft, damp klæde. Undgå at bruge skrappe kemikalier eller slibende materialer.
- Opbevaring: Opbevar enhederne et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Battery Care (Pump): Recharge the pump regularly, even if not in frequent use, to maintain battery health.
- Battery Care (Computer Sensors): Replace the CR2032 batteries in the cadence and speed sensors as needed. Ensure proper polarity when replacing.
- Valve Adapters: Keep valve adapters clean and free of debris. Ensure O-rings are intact for a proper seal.
6. Fejlfinding
- Pumpen tænder ikke: Ensure the pump is sufficiently charged. Double-click the power button firmly.
- Inaccurate pressure reading (pump): Ensure the pump is securely connected to the valve. For best accuracy, use the screw-on adapter.
- Pump overheating during use: This is normal during prolonged inflation due to air compression. For high-pressure or full inflations, use the screw-on adapter to dissipate heat and protect your hands. Allow the pump to cool down if it becomes excessively hot.
- M1 Computer not acquiring GPS signal: Sørg for at du er i et åbent område med klar view of the sky. Positioning speed can be affected by environmental and weather conditions.
- M1 Computer not connecting to sensors: Check sensor battery levels. Ensure sensors are correctly installed and within range. Re-pair sensors if necessary via the M1's settings.
- Data synkroniseres ikke med appen: Ensure Bluetooth is enabled on your smartphone and the M1 computer. Check that the XOSS app is updated to the latest version.
7. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | CYCPLUS |
| Model | AS2 + M1 |
| Farve | Sort |
| Pumpe Vægt | 3.42 ounce (97 g) |
| Pumpens dimensioner | 1.81 x 1.1 x 2.52 tommer |
| Pump Max Pressure | 100 PSI |
| Pump Wind Speed | 5 l/min |
| Pump Charge Time | Ca. 3 timer |
| Pump Battery Endurance | Op til 60 timer |
| Ventilkompatibilitet | Schrader, Presta |
| GPS Computer Features | Dynamic GPS Positioning, ANT+ Sync Sensor, App Integration (XOSS), Auto Backlight, Auto Awakening |
| Dato først tilgængelig | 2. januar 2025 |
8. Garanti og support
For warranty information and customer support, please refer to the official CYCPLUS website or contact their customer service directly. Details regarding product registration, troubleshooting assistance, and warranty claims can typically be found on the manufacturer's support pages.
Keep your purchase receipt as proof of purchase for any warranty-related inquiries.
