Skoda 57A093860C Spare Wheel Installation Kit User Manual

Indledning

This user manual provides essential information for the installation and proper use of the Skoda 57A093860C Spare Wheel Installation Kit. This kit is designed for motorists who prefer to carry a spare wheel for emergency tire situations, offering a reliable alternative to a tire repair kit.

The kit facilitates the secure and organized storage of a spare wheel and associated tools within the trunk of compatible vehicles. Please read this manual thoroughly before proceeding with installation to ensure correct setup and optimal functionality.

Produktkomponenter

The Skoda 57A093860C Spare Wheel Installation Kit includes the following components:

• 2x Polystyrene Boxes: Designed to cradle and secure the spare wheel.
• 1x Fastening Strap: For additional securing of the components.
• 1x Fastening Matrix: A base component for organizing the kit.
• 1x Toolbox: For storing smaller tools.
• 1x Wrench for Spare Wheel Fastening: Specific tool for securing the spare wheel.
• 1x Jack: For lifting the vehicle during tire changes.
• 1x Fastening Screw: To secure certain components.
• 1x Wheel Wrench: For removing and tightening wheel nuts.
• Assembly Instructions: Detailed guide for installation.

Note: The spare wheel itself is not included in this kit and must be purchased separately.

This image displays all the essential components included in the Skoda spare wheel installation kit. Visible are the two large, curved polystyrene boxes designed to fit around the spare wheel, a flat floor covering, and a smaller rectangular piece which is likely the fastening matrix or part of the toolbox. These components are designed to organize and secure the spare wheel and associated tools within the vehicle's trunk.

Opsætning og installation

This installation kit is specifically designed for Skoda Karoq models from 2017 onwards with all-wheel drive (4x4) og en basic loading floor. Det er det ikke compatible with vehicles equipped with a double or variable loading floor.

Installationstrin:

1. Prepare the Trunk: Ensure the trunk area is clear and clean before beginning the installation.
2. Position Polystyrene Boxes: Place the two polystyrene toolboxes onto the designated pins of the polystyrene spacer (fastening matrix) located in the trunk. These boxes are designed to fit precisely around the spare wheel.
3. Sikre komponenter: Secure the polystyrene boxes and the fastening matrix using the provided plastic nuts and fastening screw. Ensure all components are firmly attached to prevent movement.
4. Place Spare Wheel: Carefully place your spare wheel (not included) into the designated space, ensuring it rests securely within the polystyrene boxes.
5. Utilize Fastening Strap: If provided, use the fastening strap to further secure the spare wheel and other components, ensuring they are tightly held in place.
6. Organiser værktøjer: Store the jack, wheel wrench, and other vehicle-specific tools (e.g., towing eye, wheel cap removal bracket) within the provided toolbox and polystyrene compartments.
7. Cover with Floor Covering: Once all components are in place and secured, cover the entire assembly with the floor covering provided in the kit. This ensures a neat and flush finish with the trunk floor.

For detailed visual instructions, please refer to the assembly instructions included in your kit.

Betjening og brug

This kit primarily serves as a storage and organization solution for your spare wheel and emergency tools. Its "operation" involves ensuring the components are correctly installed and readily accessible when needed.

In Case of a Flat Tire:

1. Safely pull over to a secure location away from traffic.
2. Engage the parking brake and turn on hazard lights.
3. Access the trunk and carefully remove the floor covering to expose the spare wheel kit.
4. Retrieve the necessary tools (jack, wheel wrench) and the spare wheel from their secured positions.
5. Follow your vehicle's specific instructions for changing a flat tire.
6. After changing the tire, store the flat tire and tools back in the kit, ensuring all components are secured before replacing the floor covering.

Opretholdelse

The Skoda Spare Wheel Installation Kit requires minimal maintenance to ensure its longevity and readiness for use.

• Regelmæssig inspektion: Periodically check all components for any signs of wear, damage, or loose fittings. Ensure the plastic nuts and fastening screw remain tight.
• Renhed: Keep the polystyrene boxes and other components clean and free from dirt or debris. A damp klud kan bruges til rengøring.
• Værktøjets tilstand: Ensure all tools stored within the kit (jack, wheel wrench, etc.) are in good working order and free from rust or damage. Lubricate moving parts of the jack as per its own maintenance instructions.
• Sikker opbevaring: Always ensure the kit is properly secured in the trunk to prevent shifting during driving, which could cause damage to the kit or other items in the trunk.

Fejlfinding

Should you encounter any issues with your Skoda Spare Wheel Installation Kit, consider the following common solutions:

• Components Do Not Fit:
  • Verify your vehicle model and year. This kit is specifically for Skoda Karoq models from 2017 onwards.
  • Confirm your vehicle has all-wheel drive (4x4) og en basic loading floor. The kit is not compatible with double or variable loading floors.
  • Ensure components are oriented correctly as per the assembly instructions.
• Manglende dele:
  • Carefully check all packaging materials.
  • Refer to the "Product Components" section of this manual and the included assembly instructions to confirm all items are present.
  • If parts are genuinely missing, contact your Skoda dealer or the seller for assistance.
• Kit Shifts During Driving:
  • Ensure all plastic nuts and fastening screws are tightened securely.
  • Verify the spare wheel is properly seated within the polystyrene boxes.
  • Confirm the fastening strap (if applicable) is taut and holding the components firmly.

If you continue to experience issues, please contact authorized Skoda service personnel or the point of purchase for further support.

Specifikationer

Garanti og support

For information regarding the warranty of your Skoda 57A093860C Spare Wheel Installation Kit, please refer to the warranty documentation provided at the time of purchase or contact your authorized Skoda dealer or the original seller.

If you require technical support or have questions not covered in this manual, please reach out to:

• Your authorized Skoda service center.
• The retailer from whom you purchased the product.
• Skoda customer service (refer to Skoda's official website for contact details in your region).

When contacting support, please have your product model number (57A093860C) and proof of purchase readily available.