Peplink B-One Gigabit Dual WAN WiFi Router Brugermanual

1. Introduktion

The Peplink B-One is a Gigabit Dual WAN WiFi Router designed to provide reliable and high-performance internet connectivity for small offices, home offices, and branch locations. It features dual-WAN architecture for uninterrupted internet access through failover and load balancing, ensuring continuous operation even if one internet connection experiences an outage. This manual provides essential information for setting up, operating, and maintaining your Peplink B-One router.

Image 1.1: Peplink B-One Router highlighting its role in providing unbreakable connectivity.

2. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1x Peplink B-One Router
• 2x Dual Band Wi-Fi Antennas
• 1x 12V 3A 4 Pin Power Supply
• 1x Cable Wrap

3. Fysisk overview

3.1 Frontpanel

Billede 3.1: Forside view of the Peplink B-One Router.

• Power LED: Indikerer strømstatus.
• Status-LED: Indicates system status and internet connectivity.
• Wi-Fi LED: Angiver Wi-Fi-aktivitet.
• USB-C-port: For USB WAN or other compatible USB devices.

3.2 Bagpanel

Billede 3.2: Bagside view of the Peplink B-One Router.

• Wi-Fi Antenna Connectors (A & B): For connecting the included dual-band Wi-Fi antennas.
• LAN-porte (1-4): Four Gigabit Ethernet ports for connecting local network devices.
• WAN Ports (1 & 2): Two Gigabit Ethernet ports for connecting primary and secondary internet sources.
• DC IN: Power input for the 12V 3A power supply.

4. Opsætning

4.1 Udpakning og placering

Carefully remove the router and its accessories from the packaging. Place the router in a central location to maximize Wi-Fi coverage, away from obstructions and sources of interference such as microwaves or cordless phones.

4.2 Tilslutning af antenner

Screw the two dual-band Wi-Fi antennas onto the designated connectors (Wi-Fi Antenna A and B) on the rear panel of the router. Ensure they are securely fastened but do not overtighten.

4.3 Strømtilslutning

Connect the 12V 3A power supply to the 'DC IN' port on the rear of the router, then plug the power adapter into a wall outlet. The Power LED on the front panel should illuminate.

4.4 WAN Connections

Connect your primary internet source (e.g., cable modem, fiber ONT) to WAN Port 1 using an Ethernet cable. If you have a secondary internet source for failover or load balancing, connect it to WAN Port 2. The Peplink B-One supports various WAN types, including Starlink integration.

Image 4.1: Easy integration with Starlink for backup or primary internet.

4.5 LAN Connections

Connect your local network devices (e.g., computers, network-attached storage, switches) to the LAN Ports (1-4) using Ethernet cables.

4.6 Indledende konfiguration

For at få adgang til routerens web administration interface:

1. Ensure your computer is connected to one of the router's LAN ports or its default Wi-Fi network.
2. Åbn a web browser and navigate to the router's default IP address (commonly http://192.168.50.1 or http://192.168.1.1). Refer to the label on the bottom of your router for the exact default IP and login credentials.
3. Enter the default username and password. It is highly recommended to change these credentials immediately after your first login for security purposes.
4. Follow the on-screen setup wizard to configure your internet connections, Wi-Fi settings, and other basic network parameters.

5. Betjeningsvejledning

5.1 Dashboard overview

De web administration interface provides a comprehensive dashboard to monitor your network status, connected devices, and internet connections. Familiarize yourself with the various sections to manage your router effectively.

5.2 WAN Management

The Peplink B-One supports dual-WAN functionality. You can configure WAN ports for:

• Failover: Automatically switches to a secondary WAN connection if the primary one fails.
• Belastningsbalancering: Distributes internet traffic across multiple WAN connections to optimize bandwidth and performance.

Access the 'Network' > 'WAN' section in the web interface to configure these settings according to your requirements.

5.3 LAN and Wi-Fi Configuration

Manage your local network and wireless settings:

• Wi-Fi-indstillinger: Configure your Wi-Fi network name (SSID), password, security type (WPA2/WPA3 recommended), and operating channels in the 'Network' > 'Wi-Fi' section.
• LAN-indstillinger: Adjust IP address ranges, DHCP server settings, and create VLANs for network segmentation in the 'Network' > 'LAN' section.

5.4 SpeedFusion Technology

The Peplink B-One incorporates SpeedFusion technology, which can bond multiple internet connections into a single, more reliable and faster connection. This is particularly useful for critical applications requiring consistent bandwidth and minimal latency. Refer to the Peplink documentation for advanced SpeedFusion configurations.

Image 5.1: Peplink B-One features for uninterrupted work.

5.5 firmwareopdateringer

Regularly check for and apply firmware updates to ensure your router has the latest features, security patches, and performance improvements. This can typically be done through the 'System' > 'Firmware' section in the web interface.

6. Vedligeholdelse

6.1 Regelmæssig kontrol

Periodically check the status LEDs on the front panel to ensure normal operation. Green LEDs typically indicate healthy status, while amber or red may indicate an issue.

6.2 Rengøring

Hold routeren ren og fri for støv. Brug en blød, tør klud til at tørre ydersiden af. Brug ikke flydende rengøringsmidler eller slibende materialer.

6.3 Konfigurationssikkerhedskopiering

It is advisable to regularly back up your router's configuration settings. This allows for quick restoration in case of a factory reset or other issues. This option is usually found under 'System' > 'Configuration' in the web interface.

7. Fejlfinding

7.1 Ingen internetforbindelse

• Verify that your modem or primary internet source is working correctly.
• Check all Ethernet cables connected to the WAN ports for secure connections.
• Log ind på routeren web interface and check the status of your WAN connections.
• Try power cycling both your modem and the Peplink B-One router.

7.2 Langsom Wi-Fi-hastighed

• Ensure the router is placed centrally and away from potential interference sources.
• Check for other devices operating on the same Wi-Fi channels and consider changing channels in the Wi-Fi settings.
• Verify that your devices are connected to the appropriate Wi-Fi band (2.4GHz for range, 5GHz for speed).

7.3 Router Not Responding

• Perform a power cycle by unplugging the power adapter, waiting 10 seconds, and plugging it back in.
• If the issue persists, a factory reset may be necessary. Advarsel: A factory reset will erase all your custom configurations. Locate the reset button (often a small pinhole) and press it for 10-15 seconds while the router is powered on.

For further assistance, refer to the official Peplink support resources online.

8. Specifikationer

Image 8.1: Key specifications and features of the Peplink B-One Router.

9. Garanti og support

The Peplink B-One router is covered by a manufacturer's warranty. For specific details regarding warranty terms, duration, and conditions, please refer to the warranty card included with your product or visit the official Peplink webwebsted.

For technical support, product registration, or to access additional resources such as FAQs and firmware downloads, please visit the official Peplink support portal:

www.peplink.com/support/