LEQISMART Elektrisk Løbehjul A11 Brugermanual

1. Vigtige sikkerhedsoplysninger

Before operating your LEQISMART Electric Scooter A11, please read this manual thoroughly and understand all safety warnings and instructions. Failure to follow these instructions may result in serious injury or property damage.

• Bær altid hjelm: Ensure your helmet meets local safety standards.
• Obey traffic laws: Ride in accordance with all local traffic laws and regulations.
• Check before each ride: Verify brakes, tires, and all components are in good working order.
• Avoid riding in adverse conditions: Kør ikke i kraftig regn, sne eller på isglatte overflader.
• Maintain proper speed: Adjust your speed to suit road conditions and your skill level.
• One rider only: The scooter is designed for a single rider up to 100 kg (220 lbs).
• Be aware of surroundings: Pay attention to pedestrians, vehicles, and obstacles.

2. Produktet er slutview

The LEQISMART Electric Scooter A11 is a foldable, road-approved electric scooter designed for urban commuting and leisure. It combines robust construction with user-friendly features for a comfortable and efficient ride.

The LEQISMART Electric Scooter A11, showcasing dens slanke design og kompakte formfaktor.

Nøglefunktioner:

• Kraftig motor: Equipped with a 350W motor for efficient acceleration and climbing.
• Udvidet rækkevidde: Up to 30 km (18.6 miles) on a single charge.
• Tophastighed: Reaches a maximum speed of 20 km/h (12.4 mph).
• 10-tommer dæk: Provides improved shock absorption and a smoother ride over varied terrain.
• Dobbelt bremsesystem: Features a front hub brake and an electric rear brake for reliable stopping power.
• Intelligent LED-skærm: Shows speed, battery level, and riding mode.
• Quick Folding Mechanism: Folds in 3 seconds for easy portability and storage.
• Road Approval (ABE): Certified for legal use on public roads in Germany.

Illustration of the powerful 350W motor, highlighting key performance metrics like 30km range, 20km/h max speed, 10-inch tires, 100kg max load, and 15% climbing ability.

Close-up of the 10-inch vacuum explosion-proof tires, emphasizing their puncture resistance, good shock absorption, and low rolling resistance for a comfortable ride.

Overview of the scooter's safety features, including the dual braking system (hub and electronic brakes), integrated headlight, taillight, and horn for enhanced visibility and control.

Detaljeret view of the intelligent LED display, indicating its functions such as speedometer, power indicator, and power switch, providing essential ride information at a glance.

3. Opsætning og første samling

Your LEQISMART Electric Scooter A11 comes partially assembled. Follow these steps to complete the setup and prepare for your first ride.

3.1 Unboxing

1. Carefully open the packaging and remove the scooter and all accessories.
2. Kontroller indholdet mod pakkelisten for at sikre, at alle dele er til stede.
3. Fjern alt beskyttende emballagemateriale.

3.2 Installation af styr

1. Løft styrfrempinden op til en lodret position, indtil den klikker på plads.
2. Connect the main cable from the handlebar to the cable extending from the stem. Ensure the connectors are aligned correctly and push firmly until they click.
3. Secure the handlebar to the stem using the provided screws and Allen wrench. Tighten firmly to prevent wobbling.

3.3 Indledende opladning

Oplad scooterens batteri helt inden din første tur.

1. Locate the charging port, usually on the side of the deck.
2. Sæt opladeren i en almindelig stikkontakt, og tilslut derefter opladningskablet til scooterens opladningsport.
3. Indikatorlampen på opladeren vil typisk lyse rødt under opladning og grønt, når den er fuldt opladet.
4. Charging time may vary, but typically takes 4-6 hours for a full charge.

Visual representation of the 36V / 7.8AH battery, highlighting its multiple protection features including overcharge, over-discharge, over-voltage, over-current, short-circuit, and temperature protection.

4. Betjening af din scooter

Familiarize yourself with the controls and riding techniques for a safe and enjoyable experience.

4.1 Tænd/sluk

• For at tænde: Tryk og hold tænd/sluk-knappen på skærmen nede i et par sekunder, indtil skærmen lyser.
• For at slukke: Tryk på tænd/sluk-knappen igen, og hold den nede, indtil skærmen slukker.

4.2 Grundlæggende ridning

1. Kickstart: For safety, the scooter requires a manual kick-start. Push off with your foot to gain a small amount of momentum (approx. 3-5 km/h).
2. Fremskynde: Once moving, gently press the throttle lever (usually on the right handlebar) to engage the motor and accelerate.
3. Bremse: To slow down or stop, release the throttle and gently squeeze the brake lever(s) on the handlebars. The scooter features a dual braking system for effective stopping.
4. Ridestilling: Stand with both feet on the deck, slightly staggered for balance. Keep your knees slightly bent to absorb shocks.

4.3 Displayfunktioner

Det intelligente LED-display giver information i realtid:

• Speedometer: Viser din aktuelle hastighed.
• Batteriniveau: Angiver den resterende batteriopladning.
• Køretilstand: Shows the selected speed mode (e.g., Eco, Standard, Sport). Press the power button briefly to cycle through modes.

4.4 Foldning og udfoldning

The scooter's folding mechanism allows for easy transport and storage.

Illustrated guide to folding the LEQISMART A11 scooter in three simple steps: 1. Rotate the safety latch, 2. Fold the stem down, 3. Secure the handlebar to the rear fender.

• At folde:
  1. Sørg for, at scooteren er slukket.
  2. Find den foldede lås/håndtag ved bunden af ​​​​styrfrempinden.
  3. Follow the instructions on the image to release the latch and fold the stem downwards until it locks into the rear fender.
• At folde ud:
  1. Release the handlebar from the rear fender.
  2. Lift the handlebar stem upwards until it clicks securely into its upright position. Ensure the folding latch is fully engaged.

The folded LEQISMART A11 scooter being easily placed into a car trunk, demonstrating its portability for multi-modal transport.

A person riding the LEQISMART A11 electric scooter on a paved surface, illustrating typical usage.

5. Vedligeholdelse og pleje

Regelmæssig vedligeholdelse sikrer din scooters lange levetid og sikre drift.

5.1 Rengøring

• Tør scooteren af med reklameamp cloth after each ride to remove dirt and dust.
• Do not use high-pressure water jets or corrosive cleaning agents.
• Ensure the charging port cover is securely closed to prevent water ingress.

5.2 Pleje af batterier

• Oplad batteriet regelmæssigt, selvom det ikke er i brug, for at bevare dets sundhedstilstand.
• Undgå at aflade batteriet helt før genopladning.
• Opbevar scooteren et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer.

5.3 Dækvedligeholdelse

• Kontroller regelmæssigt dæktrykket, og pump det op til den anbefalede PSI (se dækkets sidevæg eller specifikationer).
• Undersøg dækkene for slid, punkteringer eller skader før hver tur.

5.4 Kontrol af bremsesystem

• Ensure brake levers operate smoothly and provide adequate stopping power.
• Kontroller bremseklodserne for slid, og udskift dem om nødvendigt.

6. Fejlfinding af almindelige problemer

This section addresses common problems you might encounter and their potential solutions.

If you encounter an issue not listed here, or if the suggested solutions do not resolve the problem, please contact LEQISMART customer support for assistance.

7. Tekniske specifikationer

8. Garanti og kundesupport

LEQISMART stands behind the quality of its products. Your LEQISMART Electric Scooter A11 is covered by a manufacturer's warranty against defects in materials and workmanship.

For specific warranty terms, registration, or to make a warranty claim, please refer to the warranty card included with your product or visit the official LEQISMART webwebsted.

If you require technical assistance, have questions about operation, or need to order replacement parts, please contact LEQISMART customer support. Have your model number (A11) and purchase information ready when contacting support to ensure prompt service.

Kontaktoplysninger: Please refer to the contact details provided on the LEQISMART official website or your product packaging for the most up-to-date support channels.