1. Produktet er slutview
The Streamlight ProTac Rail Mount HL-X Pro is a high-performance, lightweight, and low-profile long gun light designed for tactical applications. It delivers a powerful 1000 lumens and 50,000 candelas, providing a beam distance of up to 447 meters. This multi-fuel light offers versatility, capable of operating with either two CR123A lithium batteries or the included Streamlight SL-B26 USB rechargeable battery.
Nøglefunktioner omfatter:
- 1000 Lumens output: Provides intense illumination for various scenarios.
- Multibrændstofkapacitet: Compatible with CR123A batteries or the rechargeable SL-B26 USB battery.
- Jack-Cap Tail Switch: Offers dual operational control with both a push-button and a port for a remote pressure switch.
- TEN-TAP programmering: Allows users to select from three different operating programs.
- Integrated Rail Clamps: Facilitates easy, tool-free attachment to MIL-STD 1913 Picatinny rails and M-LOK compatible rail systems.
Image 1.1: The Streamlight ProTac Rail Mount HL-X Pro USB Light shown with all included components, such as the light unit, remote pressure switch, M-Lok kit, and USB charging cable.
2. Inkluderede komponenter
The Streamlight ProTac Rail Mount HL-X Pro USB Light (Model 88127) package typically includes the following items:
- ProTac Rail Mount HL-X Pro Light Unit
- 1 SL-B26 USB Rechargeable Battery Pack
- 40-inch USB Cord
- Jack-Cap Tail Switch (pre-installed or separate)
- M-Lok Kit
- Momentary Pressure Switch
- Hardware Kit for mounting
- 25 mm unbrakonøgle
Billede 2.1: En detaljeret view of all items provided in the product packaging, including the light, battery, charging cable, and mounting hardware.
3. Opsætning og installation
3.1 Batteriinstallation og opladning
- Unscrew the tail cap of the light unit.
- Insert the SL-B26 USB rechargeable battery with the positive (+) end facing towards the head of the light.
- Skru halehætten sikkert på igen.
- To charge the SL-B26 battery, connect the included USB cord to the battery's USB port and a compatible USB power source. The indicator light on the battery will show charging status.
- Alternatively, two CR123A lithium batteries can be used. Ensure correct polarity when inserting.
3.2 Montering af lyset
The ProTac Rail Mount HL-X Pro is designed for easy attachment to MIL-STD 1913 Picatinny rails and M-LOK compatible rail systems.
- Identify the desired mounting location on your rail system.
- For Picatinny rails, use the integrated rail clamps. Loosen the thumbscrew, position the light on the rail, and tighten the thumbscrew firmly by hand.
- For M-LOK systems, attach the M-Lok kit to the light unit using the provided hardware. Then, align the M-Lok attachment points with the M-Lok slots on your rail and secure using the M-Lok fasteners and the 25mm Allen wrench.
- If using the remote pressure switch, attach it to the Jack-Cap tail switch port and secure the pressure pad to your desired location on the firearm using the provided mounting accessories.
Image 3.1: The ProTac Rail Mount HL-X Pro light securely mounted on a long gun rail, demonstrating its low-profile design.
4. Betjeningsvejledning
4.1 Jack-Cap Tail Switch Operation
The Jack-Cap tail switch provides versatile control:
- Øjeblikkelig tændt: Press and hold the push-button on the tail cap. Release to turn off.
- Konstant tændt: Press the push-button fully until it clicks. Press again to turn off.
- Fjerntrykkontakt: When connected, the remote pressure switch provides momentary activation. Press and hold the pressure pad for momentary on. Some models may offer a constant on button on the pressure switch assembly.
Billede 4.1: En detaljeret view of the Jack-Cap tail switch, showing the push-button and the port for the remote pressure switch connection.
4.2 Light Modes and Performance
The ProTac Rail Mount HL-X Pro features multiple output modes:
- Høj: 1000 Lumens, 50,000 Candela, 447m beam distance. Runtime: 1.25 hours (CR123A) / 1.75 hours (SL-B26).
- Lav: 60 Lumens, 3,100 Candela, 111m beam distance. Runtime: 21 hours (CR123A) / 24 hours (SL-B26).
- Strobe: For signaling or disorienting. Runtime: 2.5 hours (CR123A) / 3.5 hours (SL-B26).
4.3 TEN-TAP Programming
The TEN-TAP programming allows you to select one of three user-selectable programs:
- High/Strobe/Low (Factory Default): Tap (momentary press) the switch rapidly 10 times, holding it down on the 10th tap. The light will turn off. Continue holding until the light flashes. Release the switch.
- High Only: Repeat the 10-tap process. The light will flash twice. Release the switch.
- Lav/Høj: Repeat the 10-tap process. The light will flash three times. Release the switch.
To cycle through the programs, repeat the 10-tap process. The light will indicate the current program by flashing 1, 2, or 3 times.
5. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your Streamlight ProTac Rail Mount HL-X Pro light.
- Rensning: Tør lyset af med en ren, tør kludamp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler. Hold linsen ren for at opnå maksimal lysudbytte.
- O-ringe: Periodically inspect the O-rings for wear and tear. Apply a thin coat of silicone grease to maintain water resistance. Replace O-rings if damaged.
- Batteripleje: For the SL-B26 USB battery, charge it regularly, especially if the light will not be used for an extended period. Store the battery in a cool, dry place. If using CR123A batteries, replace them when the light output diminishes. Do not mix old and new batteries or different battery types.
- Forbindelser: Ensure all electrical contacts and connections (battery terminals, tail cap threads) are clean and free of debris.
6. Fejlfinding
If you encounter issues with your Streamlight ProTac Rail Mount HL-X Pro, consider the following common solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke | Dead or low battery; Incorrect battery orientation; Loose tail cap; Dirty contacts | Charge or replace battery; Ensure correct polarity; Tighten tail cap; Clean battery and light contacts |
| Lyset er svagt eller flimrer | Low battery; Loose tail cap; Dirty contacts | Charge or replace battery; Tighten tail cap; Clean battery and light contacts |
| Remote pressure switch not working | Not fully plugged into Jack-Cap; Damaged switch or cable | Ensure secure connection; Inspect switch and cable for damage, contact support if damaged |
| Cannot change TEN-TAP program | Incorrect tapping sequence | Ensure rapid, consistent taps (10 times, holding on the 10th) |
Hvis disse trin ikke løser problemet, henvises der til afsnittet om garanti og support for yderligere assistance.
7. Tekniske specifikationer
Detailed specifications for the Streamlight ProTac Rail Mount HL-X Pro USB Light (Model 88127):
| Feature | Specifikation |
|---|---|
| Modelnummer | 88127 |
| Lyskilde | LED |
| Materiale | Anodiseret aluminium |
| Farve | Sort |
| Max Lumens | 1000 lumen |
| Max Candela | 50,000 Candela |
| Stråleafstand | 447 meters (High) |
| Strømkilde | Battery Powered (SL-B26 USB Rechargeable or 2x CR123A) |
| Voltage | 3.7 Volts (SL-B26) |
| Battericellesammensætning | Lithium Ion |
| Varens vægt | 7.2 ounces (0.45 pund) |
| Produktmål (L x B x H) | 5.43" D x 1.45" B x 1.72" H |
| Vandmodstandsniveau | Vandtæt (IP54) |
| Certificeringer | ANSI, CE |
Image 7.1: Visual representation of the light's dimensions and key performance indicators like max output, runtime, and beam distance.
8. Garanti og support
Streamlight products are known for their durability and reliability. The Streamlight ProTac Rail Mount HL-X Pro USB Light comes with a Begrænset livstidsgaranti.
This warranty covers defects in material and workmanship for the lifetime of the product, excluding batteries, bulbs, abuse, and normal wear and tear. For specific details regarding warranty claims or technical support, please visit the official Streamlight webwebsted eller kontakt deres kundeserviceafdeling.
For additional information and product support, you may visit the official Streamlight store on Amazon: Streamlight-butik.
