Indledning
Streamlight ProTac skinnemonteringen HL-X Pro er en letvægts, lavprofessionelfile long gun light designed for superior illumination. It delivers an impressive 50,000 candelas of power, ensuring excellent beam distance and clarity. This versatile light features Streamlight's Multi-Fuel functionality, allowing it to operate with either two CR123A lithium batteries or Streamlight's SL-B26 Rechargeable USB Battery. Its innovative Jack-Cap tail switch provides operational flexibility with both push-button and remote pressure switch options. The light is engineered for easy attachment to MIL-STD 1913 rails and M-LOK compatible rail systems without requiring additional tools, thanks to its integrated rail-grabber with thumbscrew.
Nøglefunktioner
- Høj output: 1000 lumens, 50,000 candela with a beam of 447 meters.
- Multibrændstofkapacitet: Runs 1.25 hours with CR123A batteries or 1.75 hours with SL-B26 USB battery on high setting.
- Lav indstilling: 60 lumens, 3,100 candela, 111 meters beam, runs 21 hours with CR123A and 24 hours with SL-B26 for extended runtime.
- Strobe Functionality: For signaling or disorienting; runs 2.5 hours with CR123A or 3.5 hours with SL-B26.
- Jack-Cap Tail Switch: Provides operational switch redundancy with both a push-button and a port for a remote pressure switch.
- TEN-TAP programmering: Allows user selection of three different operating programs (High/Strobe, High Only, Low/High).
- Nem montering: One-handed snap-on and tighten feature; Integrated rail clamps attaches to MIL-STD 1913 rails and M-LOK compatible rail systems.
- Holdbar konstruktion: Aluminum material, water-resistant (IP67 rated).
Billede: Overview of the Streamlight ProTac Rail Mount HL-X Pro highlighting its maximum output, runtime, distance, and multi-fuel battery type.
Opsætning
Pakkens indhold
Image: All components included with the Streamlight ProTac Rail Mount HL-X Pro, including the light, pressure switch, mounting hardware, and batteries.
Your Streamlight ProTac Rail Mount HL-X Pro package includes the light, Jack-Cap tail switch, momentary pressure switch, hardware kit, 25mm Allen wrench, two CR123A batteries, and an M-Lok Kit.
Installation af batteri
The ProTac Rail Mount HL-X Pro is a multi-fuel device. It can be powered by either two CR123A lithium batteries (included) or one Streamlight SL-B26 Rechargeable USB Battery (sold separately).
- Unscrew the tail cap from the light body.
- Insert the batteries with the positive (+) end facing towards the head of the light.
- Skru halehætten sikkert på igen.
Montering af lyset
The light comes with a rail-grabber that supports both MIL-STD 1913 (Picatinny) rails and M-LOK compatible rail systems. The Picatinny mount is pre-attached, and an M-LOK mount is included for alternative attachment.
- For Picatinny Rail: Use the pre-attached mount. Loosen the thumbscrew, position the light on your rail, and tighten the thumbscrew firmly by hand.
- For M-LOK Rail: Remove the pre-attached Picatinny mount by unscrewing the two screws. Attach the M-LOK mount using the provided screws and Allen wrench. Position the light on your M-LOK rail and secure it.
Image: The Streamlight ProTac Rail Mount HL-X Pro securely attached to a long gun rail system, demonstrating its low-profile design.
Billede: Et nærbillede view of the Streamlight ProTac Rail Mount HL-X Pro attached to an M-LOK compatible rail, highlighting the mounting mechanism.
Attaching the Pressure Switch
The remote pressure switch provides momentary operation and can be attached to the Jack-Cap tail switch port.
- Remove the protective cover from the remote switch port on the Jack-Cap tail switch.
- Insert the pressure switch connector firmly into the port.
- Route the pressure switch cable along your firearm and secure it using the provided zip ties or 3M double-sided tape.
Video: Official Streamlight video demonstrating the features, battery installation, and switch options of the ProTac Rail Mount HL-X Pro.
Betjeningsvejledning
Skift betjening
The ProTac Rail Mount HL-X Pro features a versatile Jack-Cap tail switch with both a push-button and a remote pressure switch port.
- Trykknap: Press for momentary on, press and click for constant on.
- Fjerntrykkontakt: Provides momentary operation when pressed.
TEN-TAP Programming
The light features TEN-TAP Programming, allowing you to select one of three user-selectable programs:
- High/Strobe (Factory Default): High output followed by Strobe.
- High Only: High output only.
- Lav/Høj: Low output followed by High output.
For at omprogrammere:
- Ensure the light is OFF.
- Tap the tail switch 9 times rapidly (within 0.4 seconds per tap).
- On the 10th tap, hold the switch down. The light will cycle through the available programs.
- Release the switch when the desired program is active. The light will flash to confirm the new setting.
Opretholdelse
To ensure optimal performance and longevity of your Streamlight ProTac Rail Mount HL-X Pro, follow these maintenance guidelines:
- Rensning: Tør lampehuset af med en blød kludamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Linsepleje: Keep the tempered glass lens clean. Use a lens cleaning cloth or soft cotton swab with a mild lens cleaner if necessary.
- O-ringe: Periodically inspect the O-rings for wear and tear. Lubricate them with silicone grease to maintain water resistance. Replace if damaged.
- Batteripleje: Remove batteries if the light will not be used for an extended period to prevent leakage. For rechargeable batteries, follow the manufacturer's charging instructions.
- Opbevaring: Opbevar lampen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
Fejlfinding
If you experience issues with your Streamlight ProTac Rail Mount HL-X Pro, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Light does not turn on or is dim. | Lave eller døde batterier. Løs halehætte. Dirty electrical contacts. | Replace batteries or recharge SL-B26. Spænd halehætten godt fast. Clean battery and light contacts with a clean cloth. |
| Pressure switch not working. | Loose connection at Jack-Cap port. Damaged pressure switch cable. | Ensure pressure switch connector is fully inserted. Inspect cable for visible damage. Contact support if damaged. |
| Light mode not changing. | Incorrect TEN-TAP programming procedure. | Review the TEN-TAP Programming section and repeat the procedure carefully. Ensure taps are within 0.4 seconds. |
| Vandindtrængen. | Beskadigede eller forkert monterede O-ringe. | Inspect O-rings on tail cap and head. Clean, lubricate, or replace if necessary. Ensure all parts are tightly sealed. |
Specifikationer
| Attribut | Værdi |
|---|---|
| Mærke | Streamlight |
| Modelnavn | ProTac Rail Mount HL-X Pro |
| Varenummer | 88126 |
| Farve | Sort |
| Materiale | Aluminium |
| Strømkilde | Battery Powered (CR123A or SL-B26 USB Battery) |
| Lysstyrke | 1000 lumen (høj), 60 lumen (lav) |
| Candela | 50,000 candela (High), 3,100 candela (Low) |
| Stråleafstand | 447 meters (High), 111 meters (Low) |
| Run Time (CR123A) | 1.25 hours (High), 21 hours (Low), 2.5 hours (Strobe) |
| Run Time (SL-B26) | 1.75 hours (High), 24 hours (Low), 3.5 hours (Strobe) |
| Vandmodstandsniveau | IP67 (Vandtæt) |
| Varens vægt | 0.41 pund |
| Produktdimensioner | 5.43 cm L x 1.45 cm B x 1.72 cm H |
| Monteringstype | Lav-Profile Long Gun Mount (Picatinny & M-LOK compatible) |
| Antal indstillinger | 3 (via TEN-TAP Programming) |
Garanti & Support
The Streamlight ProTac Rail Mount HL-X Pro comes with a Begrænset livstidsgaranti. For warranty claims, technical support, or additional product information, please contact Streamlight directly through their official webwebsted eller kundeservicekanaler.
For yderligere oplysninger, besøg den officielle Streamlight-butik på Amazon.
