1. Introduktion
Thank you for choosing the ANLAN Ultrasonic Skin Scrubber. This device is designed to provide professional-grade facial cleansing, blackhead extraction, and anti-aging benefits through advanced ultrasonic vibrations, LED light therapy, and EMS technology. Please read this manual carefully before use to ensure proper operation and maintenance.
2. Sikkerhedsoplysninger
- Do not use the device on damaged, inflamed, or broken skin.
- Opbevares utilgængeligt for børn.
- Sørg for, at enheden er fuldt opladet før første brug.
- Do not immerse the charging base in water. The device itself is IPX7 waterproof, but the charging base is not.
- Consult a dermatologist if you have sensitive skin conditions or concerns.
- Stop brugen, hvis der opstår irritation eller ubehag.
3. Produktet er slutview
3.1 Komponenter
- ANLAN Ultrasonic Skin Scrubber Device
- Magnetisk opladningsbase
- USB opladningskabel
- Brugermanual
3.2 Nøglefunktioner
- Dyb rengøring: Ultrasonic vibrations (up to 24,000/s) effectively remove blackheads, dirt, and exfoliate the skin.
- LED terapi: Red light stimulates collagen, reduces pores and wrinkles; Blue light has anti-inflammatory effects, helps with acne.
- EMS Anti-Aging: Activates facial muscles, firms skin, and reduces signs of aging.
- Enhanced Nutrient Absorption: Negative ions facilitate deeper penetration of skincare products.
- IPX7 Vandtæt: Safe for use in wet environments.
- Magnetisk opladningsbase: Convenient and space-saving charging.
Figure 1: ANLAN Ultrasonic Skin Scrubber and its accessories.
4. Opsætning
4.1 Opladning af enheden
- Connect the USB charging cable to the magnetic charging base.
- Plug the other end of the USB cable into a suitable power adapter (not included) or a USB port.
- Place the ANLAN Ultrasonic Skin Scrubber onto the magnetic charging base. Ensure the device is properly aligned for charging.
- The indicator light on the device will show charging status. Charge fully before first use (approximately 2-3 hours).
Figure 2: The magnetic charging base provides convenient and space-saving power.
5. Betjeningsvejledning
5.1 General Usage Steps
- Forberedelse: Cleanse your face thoroughly. For best results, use a warm towel or facial steamer for 5 minutes to open pores.
- Anvend produkt: Apply a facial cleanser, toner, serum, or cream to your face, ensuring the skin remains moist throughout the treatment.
- Tænd: Tryk og hold tænd/sluk-knappen nede for at tænde enheden.
- Vælg tilstand: Tryk gentagne gange på tænd/sluk-knappen for at gå gennem de forskellige tilstande.
- Behandling: Gently glide the spatula over your skin in an upward and outward motion, following the contours of your face. Do not press too hard.
- Efterbehandling: After use, rinse your face with lukewarm water and gently pat dry. Clean the device as per maintenance instructions.
Figure 3: Illustrated steps for using the ANLAN Ultrasonic Skin Scrubber.
5.2 Driftsformer
The ANLAN Ultrasonic Skin Scrubber features multiple modes to address various skin concerns:
| Mode | Fungere | Anbefalet brug |
|---|---|---|
| Ultrasonic Cleaning (Peeling) | High-frequency vibrations atomize water to deeply cleanse pores, remove blackheads, dead skin, and impurities. | Use on wet skin with a cleanser. Glide the spatula at a 45-degree angle. |
| Ion+ (Ionic Drainage) | Utilizes positive ions to draw out stubborn dirt, oil, and makeup residue from pores. | After cleansing, use with toner or cleansing water. |
| Ion- (Nutrient Introduction) | Utilizes negative ions to help skincare products (serums, essences, moisturizers) penetrate deeper into the skin for better absorption. | Apply serum or cream, then glide the spatula to massage. |
| EMS Lifting (Microcurrent) | Microcurrent stimulation activates facial muscles, promotes collagen production, and helps to firm and lift the skin, reducing fine lines and wrinkles. | Use with a conductive gel or moisturizing cream. Glide upwards from chin to forehead. |
Figur 4: Overview of the four functional modes for radiant skin.
Figure 5: The ultrasonic process for deep cleaning and blackhead removal.
Figure 6: Visible improvement in blackheads after using the skin scrubber.
Figure 7: The device acts as a dermatology assistant, showing improvements in various skin conditions.
Figure 8: The device provides an effective facial cleansing massage.
6. Vedligeholdelse og pleje
- Cleaning the Spatula: After each use, wipe the stainless steel spatula with a soft cloth or cotton pad moistened with water or a mild disinfectant.
- Rengøring af enhedens krop: Wipe the main body of the device with a dry or slightly damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Vandtæt funktion: The device is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This allows for easy rinsing under running water.
- Opbevaring: Opbevar enheden et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
- Opladningsbase: Keep the charging base dry. Do not rinse or immerse it in water.
Figure 9: The IPX7 waterproof design allows for easy cleaning and use without fear of water damage.
Figure 10: The device's IPX7 rating ensures it can be used and cleaned safely in the bathroom.
7. Fejlfinding
If you encounter any issues with your ANLAN Ultrasonic Skin Scrubber, please refer to the table below for common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tændes ikke. | Lavt batteri eller ikke opladet. | Charge the device fully using the provided charging base and cable. |
| No ultrasonic vibration. | Incorrect mode selected or insufficient contact with skin. | Ensure 'Ultrasonic Cleaning' mode is active. Make sure the spatula is in firm contact with moist skin. |
| Weak EMS sensation. | Skin is not moist enough or incorrect mode. | Ensure skin is adequately moist with a conductive gel or cream. Select 'EMS Lifting' mode. |
| Enheden holder op med at virke under brug. | Batteriet er lavt. | Genoplad enheden. |
| Opladningsindikatorlampen virker ikke. | Forkert tilslutning eller defekt kabel/base. | Ensure the device is correctly placed on the magnetic base and the cable is securely connected. Try a different USB port or power adapter. |
If the problem persists after trying these solutions, please contact ANLAN customer support for further assistance.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | 1 |
| Mærke | Anlan |
| Materiale | Plast |
| Farve | Hvid |
| Vandtæt vurdering | IPX7 |
| Ultralydsfrekvens | Op til 24,000 Hz |
| Strømkilde | Genopladeligt batteri |
| Opladningsmetode | Magnetisk opladningsbase |
| Dimensioner (pakke) | 19 x 12.9 x 3.2 cm |
| Vægt | 250 gram |
| Oprindelsesland | Kina |
9. Garanti og support
ANLAN products are manufactured to the highest quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the warranty card included with your product or visit the official ANLAN website. You may also contact ANLAN customer service directly for assistance with any product-related inquiries.
We are committed to providing a satisfactory solution for any confusion you may have during use.
