Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire

1. Produktet er slutview

The Philips DayBrite CFI Linear SDS Selectable Strip is a versatile 2-foot LED luminaire designed for various indoor lighting applications. This fixture offers field-selectable color temperatures (3500K, 4000K, 5000K) and lumen outputs (1200, 1800, 2400 lumens), providing flexibility to meet specific lighting requirements. It features 0-10V dimming capability for precise light level control.

Figure 1: Philips DayBrite CFI Linear SDS Selectable LED Strip Luminaire. This image shows the full length of the white linear LED strip light, featuring a frosted diffuser for even light distribution and a sleek, minimalist design suitable for various indoor installations.

2. Sikkerhedsoplysninger

Læs venligst alle instruktioner omhyggeligt inden installation og brug. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer. Gem denne manual til senere brug.

• ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
• Installation must be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
• Do not install in wet locations or near flammable materials.
• Sørg for, at forsyningen voltage is compatible with the luminaire's requirements (120-277V AC).
• Modificer ikke armaturet på nogen måde.
• Handle with care to avoid damage to LED components.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, når du åbner pakken:

• 1 x Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire
• 1 x installationsvejledning (dette dokument)
• Mounting Hardware (e.g., screws, anchors - may vary by package)

4. Opsætning og installation

This luminaire is designed for surface mounting. Professional installation is recommended.

1. Forbered installationsområdet: Ensure the mounting surface is structurally sound and can support the weight of the fixture. Turn off power at the circuit breaker before beginning installation.
2. Marker monteringspunkter: Use the luminaire as a template to mark the desired mounting locations on the ceiling or wall. Ensure marks are level and spaced correctly for secure attachment.
3. Installer monteringshardware: Drill pilot holes at the marked locations. Insert appropriate anchors if mounting into drywall or plaster. Secure the mounting brackets (if separate) or the luminaire directly using screws.
4. Ledningsforbindelser:
   • Connect the AC power supply wires (Line, Neutral, Ground) from the junction box to the corresponding wires on the luminaire. Follow local electrical codes for proper wiring.
   • For 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the luminaire to the corresponding wires on your 0-10V dimming control system. Ensure polarity is correct.
   • Fastgør alle ledningsforbindelser med passende ledningsmøtrikker eller -stik.
5. Fastgør armaturet: Once wiring is complete and connections are secure, attach the luminaire firmly to the mounting surface. Ensure no wires are pinched.
6. Gendan strøm: Turn on power at the circuit breaker. Test the luminaire for proper operation and dimming functionality.

5. Betjeningsvejledning

This luminaire features field-selectable color temperature and lumen output settings.

• Valg af farvetemperatur: Locate the CCT (Correlated Color Temperature) selector switch on the luminaire. This switch allows you to choose between 3500K (Warm White), 4000K (Cool White), and 5000K (Daylight) settings. Ensure power is off before adjusting this switch.
• Lumen Output Selection: Locate the Lumen selector switch on the luminaire. This switch allows you to choose between 1200, 1800, and 2400 lumens. Ensure power is off before adjusting this switch.
• 0-10V dæmpning: Once installed and wired to a compatible 0-10V dimmer, the light output can be adjusted smoothly from 100% down to 10% (or lower, depending on dimmer specifications) using the external dimming control.

6. Vedligeholdelse

The Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire requires minimal maintenance.

• Rensning: Afbryd strømmen før rengøring. Brug en blød, tør eller let fugtet klud.amp cloth to wipe the exterior surface of the luminaire. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these may damage the finish or optical components.
• lysdioder: LED'erne er integrerede og skal ikke udskiftes.

7. Fejlfinding

If you experience issues with your luminaire, refer to the following common problems and solutions:

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.

8. Specifikationer

9. Garantioplysninger

This Philips DayBrite product is covered by a manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official Signify webwebstedet for detaljerede garantivilkår og -betingelser. Gem din købsbevis til garantikrav.

10. Kundesupport

For technical assistance, product inquiries, or warranty claims, please contact Signify customer support:

• Webwebsted: Visit the official Signify or Philips Lighting webwebsted for supportressourcer, ofte stillede spørgsmål og kontaktoplysninger.
• Telefon: Refer to the contact details provided on the product packaging or the manufacturer's webwebsted.

When contacting support, please have your product model number (SDS21224L8CST-UNV-DIM) and proof of purchase readily available.