Brugervejledning til SONOFF SNZB-02P Zigbee temperatur- og fugtighedssensor

1. Produktet er slutview

The SONOFF SNZB-02P is a compact Zigbee-enabled temperature and humidity sensor designed for indoor environmental monitoring. It provides accurate real-time data, enabling smart home automation and comfort alerts. This sensor requires a Zigbee 3.0 compatible hub for operation.

Image: The SONOFF SNZB-02P sensor, a small white disc, shown alongside its orange product packaging. The packaging highlights its function as a Zigbee Temperature and Humidity Sensor.

2. Hvad er der i æsken

• 1 x SONOFF SNZB-02P Zigbee Temperature and Humidity Sensor
• 1 x CR2477 litiummetalbatteri (forinstalleret eller inkluderet)
• 1 x Brugermanual (dette dokument)

3. Specifikationer

Image: A graphic illustrating the high accuracy of the sensor, displaying ±0.2°C temperature accuracy and ±2%RH humidity accuracy, along with chip details (EFR32 MG22C22, SHT40).

4. Opsætning og installation

4.1 Batteriinstallation

The SNZB-02P sensor is powered by a CR2477 Lithium Metal battery, which is typically included or pre-installed. To access the battery compartment:

1. Drej forsigtigt bagdækslet på sensoren mod uret for at åbne det.
2. Insert or replace the CR2477 battery, ensuring the positive (+) side faces upwards.
3. Juster dækslet, og drej det med uret for at fastgøre det.

Image: The SONOFF SNZB-02P sensor with its back cover detached, revealing the internal battery compartment. A CR2477 battery is shown next to the sensor, emphasizing its 4-year battery life.

4.2 Parring med en Zigbee Hub

The SNZB-02P requires a Zigbee 3.0 compatible hub to function. This includes hubs like SONOFF iHost, NSPanel Pro, ZB Bridge Pro, ZBDongle-E, Echo 4th Gen, and SmartThings Hub V3.

1. Sørg for, at din Zigbee-hub er tændt og i parringstilstand. Se din hubs specifikke instruktioner for at aktivere parringstilstand.
2. On the SNZB-02P sensor, press and hold the reset button (usually a small pinhole button) for approximately 5 seconds until the LED indicator flashes rapidly. This indicates it's in pairing mode.
3. Once successfully paired, the LED indicator will stop flashing, and the sensor will appear in your Zigbee hub's connected devices list.
4. You can then integrate the sensor with compatible smart home platforms such as Alexa or Google Home through your Zigbee hub's application.

Important Note: The SNZB-02P sensor cannot connect directly to Wi-Fi and must be used with a Zigbee hub.

5. Betjening

5.1 Realtidsovervågning

Once paired, the sensor will begin transmitting temperature and humidity data to your Zigbee hub. Data measurements are updated approximately every 5 seconds, providing near real-time environmental readings.

Image: A smartphone screen showing the eWeLink app interface with historical temperature and humidity data graphs, indicating accurate hourly-data viewing and half-year data storage capabilities.

5.2 Comfort Alerts and Smart Scenes

Utilize your Zigbee hub's application to set up custom alerts and smart scenes based on the sensor's readings:

• Comfort Alerts: Receive immediate notifications on your phone if the temperature or humidity exceeds predefined comfort ranges (e.g., too hot, too cold, too humid, too dry).
• Smarte scener: Automate other smart devices. For example, you can configure a scene to turn on a fan if the temperature rises above 28°C or activate a humidifier if humidity drops below 45%RH.

Image: A visual representation of how the sensor helps maintain room comfort by sending alerts when temperature or humidity exceeds set ranges, and how it can create smart scenes to control devices like fans or humidifiers based on environmental conditions.

5.3 Datalagring og eksport

The sensor's data is stored in the cloud (up to half a year of free storage). You can access historical temperature and humidity variations for daily, monthly, or six-month periods through your connected application. Data can also be exported for further analysis.

6. Vedligeholdelse

6.1 Batterilevetid og udskiftning

The SNZB-02P boasts an extended battery life of up to 4 years under typical usage conditions. When the battery level is low, you may receive a notification through your smart home application. Replace the CR2477 battery as described in Section 4.1.

6.2 Rengøring

To ensure accurate readings, keep the sensor clean. Wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or submerging the device in water.

7. Fejlfinding

• Sensor Not Connecting/Pairing:
  • Sørg for, at din Zigbee-hub er tændt og i parringstilstand.
  • Verify the sensor's battery is correctly installed and has sufficient charge.
  • Make sure the sensor is within range of your Zigbee hub.
  • Try resetting the sensor by holding the reset button for 5 seconds and re-attempting the pairing process.
  • If using Home Assistant, some users have reported success by deleting and re-adding the device if data refresh issues occur after initial pairing.
• Upræcise læsninger:
  • Ensure the sensor is not placed near heat sources (e.g., direct sunlight, heating vents) or cold drafts, which can affect readings.
  • Avoid placing the sensor in areas with high humidity fluctuations (e.g., directly above a humidifier outlet).
  • Clean the sensor regularly to prevent dust buildup from affecting the sensors.
• Batteriet aflades hurtigt:
  • Ensure you are using a genuine CR2477 battery.
  • Ekstreme temperaturer kan påvirke batteriets ydeevne.

8. Garanti og support

8.1 Garantioplysninger

For detailed warranty information regarding your SONOFF SNZB-02P sensor, please refer to the warranty card included with your product or visit the official SONOFF webGarantibetingelserne kan variere afhængigt af region og forhandler.

8.2 Kundesupport

If you encounter any issues or have questions not covered in this manual, please contact SONOFF customer support through their official webwebstedet eller den forhandler, hvorfra du købte produktet.

You can also visit the official SONOFF store for more information and products: SONOFF Official Store