Bingfu Mobil Ham Radio Antenne Brugermanual

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your Bingfu Vehicle Mobile Ham Radio Antenna. This dual-band antenna is designed for VHF (136-174MHz) and UHF (400-470MHz) frequencies, featuring a strong magnetic base for vehicle mounting and a soft whip design. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Pakkens indhold

Bekræft, at alle nedenstående varer er til stede i din pakke:

• 1 x Ham Radio Antenna (Soft Whip)
• 1 x Magnetic Base with 5m/16.4ft RG58/U Cable and UHF PL259 Male Connector
• 1 x SO239 to SMA Female Adapter
• 3 x Short Ground Planes (9.5cm/3.74inch for UHF)
• 3 x Long Ground Planes (15cm/5.9inch for VHF)
• 1 x PL259 to SO239 Adapter
• 1 x Hex Tool (for tuning, if applicable)

Figur 2.1: Complete antenna kit including the whip antenna, magnetic base, cable, adapters, ground planes, and hex tool.

3. Produktfunktioner

• Dobbeltbåndsdrift: Supports VHF (136-174MHz) and UHF (400-470MHz) frequencies.
• Magnetic Base Mount: Features a strong magnetic base for secure attachment to vehicle metal surfaces. Includes a silicone rubber gasket to protect vehicle paint.
• Soft Whip Antenna: Flexible and durable antenna whip, approximately 42cm (16.53 inches) in length.
• Integreret kabel: Comes with a 5m (16.4ft) RG58/U coaxial cable for extended reach.
• PL259 Male Connector: Standard connector for compatibility with various ham radios.
• Ground Plane Kit: Includes both short (9.5cm) and long (15cm) ground planes for optimized performance across different frequency bands.
• Bred kompatibilitet: Designed for use with Marine Boat VHF Radio, Amateur Mobile Radio, Ham Radio, FRS GMRS MURS Radio, Walkie Talkies, and Two Way Radios. Compatible with brands such as BTECH, ICOM, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, and Stryker.

Figur 3.1: Antenna dimensions and cable type. The antenna whip is flexible, and the cable is a low-loss RG58 type.

Figur 3.2: Details of the magnetic base, highlighting its strong magnetic hold and the protective silicone rubber gasket.

4. Opsætning og installation

4.1. Ground Plane Assembly

1. Identify the central connector for the ground planes.
2. Select the appropriate ground plane rods based on your operating frequency:
   • Brug short ground planes (9.5cm/3.74inch) for optimal performance on UHF (400-470MHz).
   • Brug long ground planes (15cm/5.9inch) for optimal performance on VHF (136-174MHz).
3. Carefully screw the three selected ground plane rods into the designated ports on the central connector. Ensure they are finger-tight.

Figur 4.1: Ground plane kit showing the central connector and both short and long ground plane rods.

Figur 4.2: Comparison of short (UHF) and long (VHF) ground plane rod lengths.

4.2. Antenna Assembly

1. Screw the assembled ground plane unit onto the base of the antenna whip.
2. Attach the antenna whip assembly to the magnetic base. Ensure a secure connection.

4.3. Vehicle Mounting

1. Choose a flat, metallic surface on your vehicle, such as the roof or trunk lid, that is free from obstructions and provides a clear line of sight.
2. Clean the chosen surface thoroughly to ensure maximum magnetic adhesion and to prevent scratching.
3. Place the magnetic base firmly onto the cleaned metallic surface. The strong magnet will secure the antenna. The silicone gasket on the base helps protect your vehicle's paint.
4. Route the 5m (16.4ft) RG58/U coaxial cable carefully to your radio, avoiding sharp bends, pinching, or interference with doors or windows.

Figur 4.3: Example of antenna placement on a vehicle roof for optimal signal.

4.4. Tilslutning til din radio

1. The antenna cable terminates with a UHF PL259 Male Connector.
2. If your radio has a UHF SO239 Female port, connect the PL259 Male connector directly.
3. If your radio requires an SMA Female connection (common on handheld radios), use the provided SO239 to SMA Female Adapter. First, connect the PL259 Male to the SO239 side of the adapter, then connect the SMA Female side to your radio.
4. Ensure all connections are tight to prevent signal loss.

Figur 4.4: Connector types and adapters for connecting the antenna to various mobile ham radios.

5. Betjening

Once installed and connected, your Bingfu antenna is ready for use. Ensure your radio is set to the correct frequency band (VHF or UHF) corresponding to the ground planes you have installed for optimal performance.

• Frekvensområde:
  • VHF: 136-174MHz
  • UHF: 400-470MHz
• SWR-tuning: While the antenna is designed for broad coverage, fine-tuning the SWR (Standing Wave Ratio) with an SWR meter is recommended for peak performance and to protect your radio's final amplifier. The included hex tool may be used for minor adjustments if the antenna whip allows for it.

Figur 5.1: The antenna facilitates clear communication for mobile radio users.

6. Vedligeholdelse

• Rensning: Periodically clean the antenna whip and magnetic base with a soft, damp klæde. Undgå slibende rengøringsmidler.
• Magnetic Base Inspection: Regularly check the magnetic base and the vehicle surface beneath it for any debris that could scratch the paint or reduce magnetic adhesion. Ensure the silicone gasket is intact.
• Kabelinspektion: Inspect the coaxial cable for any signs of wear, cuts, or damage. Ensure connectors are clean and tight.
• Opbevaring: When not in use for extended periods, especially in harsh weather, it is recommended to remove the antenna and store it in a dry, protected environment.

7. Fejlfinding

8. Specifikationer

9. Sikkerhedsoplysninger

• Do not operate the antenna near power lines or during lightning storms.
• Ensure the antenna is securely mounted to prevent it from detaching during vehicle movement, which could cause injury or damage.
• Avoid touching the antenna during transmission, as high-frequency energy can cause burns.
• Always check your SWR before transmitting to prevent damage to your radio equipment.

10. Garanti og support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Bingfu customer service directly. Keep your purchase receipt as proof of purchase.

Fabrikant: Bingfu

ASIN: B0CLKLHHNP