Indledning
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Antec A30 Pro CPU Air Cooler. Designed for efficient cooling of Intel and AMD CPUs, the A30 Pro features a 90mm blue LED fan and a robust heat dissipation system. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
Nøglefunktioner:
- Blue LED design for enhanced aesthetics.
- Large heat dissipation fin for effective cooling.
- Low noise level of 35 dB(A).
- Equipped with 2 copper heat pipes and aluminum fins.
Sikkerhedsoplysninger
Please observe the following safety guidelines to prevent damage to the product or injury:
- Sørg for, at dit computersystem er slukket og taget stikket ud af stikkontakten før installation eller vedligeholdelse.
- Handle the cooler and its components with care to avoid bending fins or damaging heat pipes.
- Opbevares utilgængeligt for børn.
- Do not attempt to modify the cooler. Unauthorized modifications may void your warranty and pose safety risks.
- Wear anti-static gloves or use proper grounding techniques when handling internal computer components to prevent electrostatic discharge (ESD).
Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Antec A30 Pro CPU Cooler (with integrated 90mm fan)
- Monteringssæt (til Intel- og AMD-sokler)
Opsætning og installation
The Antec A30 Pro CPU Air Cooler is compatible with various Intel and AMD CPU sockets. The installation process may vary slightly depending on your specific motherboard and CPU socket type. Refer to your motherboard's manual for specific CPU cooler mounting instructions if needed.
Generelle installationstrin:
- Forbered CPU'en: Ensure your CPU is properly seated in its socket. Clean any old thermal paste from the CPU surface and the cooler's base using isopropyl alcohol and a lint-free cloth.
- Påfør termisk pasta: Påfør en lille mængde termisk pasta på størrelse med en ært i midten af CPU'ens integrerede varmefordeler (IHS). Fordel den ikke manuelt; trykket fra køleren vil fordele den jævnt.
- Fastgør monteringsbeslag: Depending on your CPU socket (Intel or AMD), attach the appropriate mounting brackets to the cooler's base or motherboard as per the included hardware kit instructions.
- Placering af køleren: Carefully align the cooler over the CPU, ensuring the mounting holes or clips match.
- Fastgør køleren: Gently press down and secure the cooler using the provided screws or clips. Tighten screws in a diagonal pattern to ensure even pressure. Do not overtighten.
- Tilslut ventilatorkabel: Locate the CPU_FAN header on your motherboard and connect the 3-pin fan cable from the Antec A30 Pro cooler.
Image: Antec A30 Pro CPU Air Cooler. This image displays the Antec A30 Pro CPU Air Cooler, featuring a 90mm blue LED fan, aluminum fins, and two copper heat pipes extending from the base. The mounting brackets are visible at the bottom.
Betjeningsvejledning
Once installed, the Antec A30 Pro CPU Air Cooler operates automatically. The fan speed is typically controlled by the motherboard's BIOS/UEFI settings based on CPU temperature, ensuring optimal cooling performance while minimizing noise.
- Tænd: After installation, power on your computer. The blue LED fan should illuminate and begin spinning.
- BIOS/UEFI-indstillinger: You can access your motherboard's BIOS/UEFI settings during startup to monitor CPU temperatures and adjust fan curves if desired. Consult your motherboard manual for specific instructions.
- Overvågning: Use system monitoring software to keep track of CPU temperatures, especially during demanding tasks, to ensure the cooler is functioning effectively.
Opretholdelse
Regelmæssig vedligeholdelse er med til at sikre din CPU-kølers levetid og optimale ydeevne.
- Fjernelse af støv: Periodically (every 3-6 months, or more frequently in dusty environments) clean dust from the fan blades and heatsink fins. Use compressed air or a soft brush. Ensure the fan is held stationary while cleaning with compressed air to prevent over-spinning and potential damage.
- Termisk pasta: If you remove the cooler for any reason, it is recommended to clean off the old thermal paste and apply new thermal paste before reinstallation.
- Inspektion: Occasionally inspect the fan for any signs of wear or damage, and ensure the mounting hardware remains secure.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Fan not spinning / No LED | Fan cable not connected or loose. | Check the 3-pin fan cable connection to the CPU_FAN header on the motherboard. Ensure it is securely seated. |
| Høje CPU-temperaturer | Improper thermal paste application; Cooler not seated correctly; Excessive dust on heatsink/fan. | Reapply thermal paste; Re-seat the cooler, ensuring even pressure; Clean the heatsink and fan thoroughly. Verify fan is spinning. |
| For meget støj fra ventilatoren | Dust accumulation; Fan bearing issue; Fan hitting cables. | Clean the fan blades. Ensure no cables are obstructing the fan. If noise persists, the fan may require replacement. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 0-761345-77752-0 |
| Produktdimensioner | 4.53 x 3.54 x 5.43 tommer |
| Varens vægt | 3.53 ounce |
| Mærke | Antec |
| Strømstik type | 3-benet |
| Voltage | 12 volt (DC) |
| Wattage | 3 watt |
| Afkølingsmetode | Luft |
| Kompatible enheder | Desktop CPUs (Intel/AMD) |
| Støjniveau | 35 Decibels (dB(A)) |
| Materiale | Aluminum (fins), Copper (heat pipes) |
| Maksimal rotationshastighed | 1800 RPM |
| UPC | 761345777520 |
Garanti og support
Antec products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please visit the official Antec webwebstedet eller kontakt deres kundesupport direkte. Gem din købsbevis til garantikrav.
Antec Officiel Webwebsted: www.antec.com
